Hoi Foppe,
Zou je mij kunnen helpen.. Het werkt niet bij.
Ik zie een melding " X startup failed, aborting installation"
Alvast bedankt
Timo
Wat voor grafische kaart? Nieuwe Nvidiakaart (1000 serie) of een rx vega ofzo? In dat geval zou het kunnen dat die niet ondersteund wordt (en zeker in het laatste geval wordt het dan wat lastig).
Ik heb een MSI RX 550 Aero ITX 2GB, is niet On-Board of zo.
Welke mag ik aanschaffen? Welke is een goede voorbeeld? Ik heb ook een Ryzen processor dus moet een externe videokaart gebruiken.
Ook heb ik mijn bios instellingen aangepast, daarna leek het te gaan installeren, daarna start Qubes niet op.
Wat is het advies?
Welke Grafischekaart werkt?
Misschien kunnen we ook de bnios instellingen delen, ik heb screenshots gemaakt.
Hm, een rx 550 is wat te nieuw voor de kernel die wordt gebruikt door de installer, wordt pas ondersteund vanaf 4.11. Om te installeren zul je dus even een andere kaart erin moeten stoppen, liefst al een wat oudere; daarna kun je gewoon (met de guide) zelf een 4.12-gebaseerde kernel maken met ondersteuning.
Ik ga kijken of ik een oude kaart uit mijn andere PC kan gebruiken.
Weet je misschien meer over de bios? Met name de instellingen zoals:
CPU Config
CPU Freq en Volt change Auto
SMT mode Ena/Dis (Ena)
DRAM Timing config XPM 2.0, Auto, Auto
Cool 'n' Quiet Ena/Dis (Ena)
AMD fTPM Switch Ena/Dis (Dis)
SVM Mode Ena/Dis (Ena)
C6 Mode Ena/Dis (Ena)
Security
Secure boot Ena/Dis (Dis)
Secure boot Mode Std/Cus (Standard)
Boot
Fast Boot Ena/Dis (Dis)
Boot Option 1 UEFI CD/DVD
Boot Option 2 UEFI SSD
Boot Option 3 CD/DVD
Boot Option 4 SSD
Boot Compatibility Support Module
CSM Ena/Dis (Ena)
PXE OpROM Policy Legacy Only
Storage OpROM Policy Legacy Only
Video OpROM Policy Legacy Only
North Bridge Configuration
IOMMU ?/Dis (Auto)
SR-IOV Support Ena/Dis (Dis)
South Bridge Configuration
OnboardHD Audio Ena/Dis (Ena)
Deep Sleep Ena/Dis (Dis)
Storage Configuration
SATA Controllers Ena/Dis (Ena)
SATA Mode ??/?? (AHCI Mode)
ACPI Configuration
Suspend to RAM Ena/Dis (Dis)
ACPI HPET Table Auto
Trusting Computing
Security Device Support Ena/Dis (Ena)
AMD CBS \ ZEN Common options Ena\All AUTO
Wat denk je?
nu dit:
Unsupported Hardware Detected
This hardware lacks features required by Qubes OS
Missing features: Interrupt Remapping. For more information on supported hardware bla bla bla....
plaatjes zijn op mijn OneDrive https://1drv.ms/f/s!AriDYW7G-G4jhP5t9iufokS7XMMvyA
Pffffff
wat aan moet staan is IOMMU, SVM en SRIOV, de rest mag je op de standaardwaarden laten.
Oke,
Is nu bezig met config van Templates (meerdere)
Dank.
Is klaar en het werkt. Nu leren hoe het werkt.
Bedankt Foppe.
mooi, graag gedaan en succes. :)
Als je een kernel wilt compilen die de rx550 zou moeten ondersteunen is hier een handleiding; kies voor 4.12.14 (4.13 is momenteel nog instabiel ivm onbekend probleem): https://github.com/0spinboson/qubes-doc/blob/patch-1/managing-os/compiling-your-own-kernel.md
I can confirm that I've seen issues with this particular motherboard too (AB350 Pro4 / with Ryzen 3).
There is in particular issues with the BIOS version 4.6 which changes the whole PCI architecture (by the looks of it), and it messes everything up in Qubes so it can't even boot up (other versions were very, very faulty, but it did allow Qubes to boot somewhat okay though). So I had to move it back to BIOS version 4.40. as I didn't have enough time to try troubleshoot my friends machine at the time.
One thing I need to still try, is to re-install Qubes after updating to BIOS 4.60, it seems like it might work considering how it changes the hardware layout between 4.40 and 4.60, so a clean install might do good and be what is needed, but it may not fix it still (remains to be tested).
--
You received this message because you are subscribed to a topic in the Google Groups "qubes-users" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/qubes-users/LVcCcrUGBTU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to qubes-users+unsubscribe@googlegroups.com.
To post to this group, send email to qubes...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/2bcf5929-093e-4b0a-a3de-23ee3fb48c77%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
I assume that with vega graphics, you are using a 2400G
Any updates on your attemps to make Qubes run with 2400G? I wonder if 4.4 actually supports the APU-esque Ryzen processors
I checked yesterday it seems 4.7 has already been released. Might be worth the try. On a second note, have you tried to installing qubes with options like
acpi=off and nouveau.modeset=0?