HCL - Gigabyte GA-970A-DS3P (Rev2.1)

[Anirban Kar]

Hi,

I am using Qubes 4.0.2 rc1.

Motherboard: Gigabyte GA-970A-DS3P (Rev 2.1)

Gfx card discreet: MSI N560GTX Ti Hawk

Processor: AMD FX4300

RAM: Corsair Vengeance 1600MHz 4GB x2

Storage : Seagate 1TB SSHD FireCuda

PS/2 : Keyboard & Mouse.

All the notified updates are taken on the day of submitting the report.

sys-usb is not reliable. Detected my printer, webcam, usb storage on the first go but then if disconnected and rebooted fails to detect them when attached again. However detects all if attached prior to boot. This unreliability contributes to tethering which is very flaky with an Android phone running Android 7. Attaching phone to sys-net sometimes disables tethering or dom0 notifies "Android device removed". Although never tested with a usb modem. USB-3.0 port does not detect any usb device.

Suspend or Hibernate does not work and does not power down the CPU cooler or the PSU cooler. Only screen saver activated and prompts logging when mouse or keyboard input is given. After logging the system fails to shutdown or restart, loops back to login screen all the time. Needs to pull the power cord to shutdown the machine.

Also "Settings" of Fedora 30 Template VM have no function other than starting the VM. Installation and subsequent update went smoothly.