Xtreme wheel rim size

[nigelp]

Does anyone have a quick answer to the rim width for the standard 15
ins alloys as supplied by Q, bought mine approx 5 years ago. I
believe they are 6J, but not 100% sure. Thx

Nigel

[Sean]

My old Fox 1 evo were 6.5J x 15 with an offset of ET35. The
replacements are 7J x 15 ET32

Sean

[Jim Hearne]

It will be marked somewhere on the wheel.
Either stamped on a flat area on the rim, under the centre cap (if it has
them) or sometimes on the rear of the wheel in the recesses between the bolt
holes.
I don't remember any alloys that didn't have the size and the offset stamped
somewhere.

Jim

--------------------------------------------------
From: "Sean" <lang...@hotmail.com>
Sent: Thursday, April 14, 2011 8:29 PM
To: "Quantum Owners Group" <quantu...@googlegroups.com>
Subject: [Quantum Owners] Re: Xtreme wheel rim size

> --
> You received this message because you are subscribed to the Google Groups
> "Quantum Owners Group" group.
> To post to this group, send email to quantu...@googlegroups.com
> To unsubscribe from this group, send email to
> quantumowner...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/quantumowners?hl=en
>
> IMPORTANT NOTE: All information presented herewith is provided on an "As
> Is" basis, without warranty or the implication thereof. Neither the
> Quantum Owners Club nor the individuals associated with the Quantum Owners
> Club or in the preparation of the above information shall have any
> liability to any person or entity with respect to liability, loss, or
> damage caused or alleged to be caused directly or indirectly by the
> instructions contained within this or related message(s).
>

[barnacle]

Note that standard ford 15" wheels (e.g. Focus) are offset 55 - and as
a result don't fit without spacers. I found that out the hard way...
anyone want some focus wheels?

Neil

On Apr 15, 8:31 am, "Jim Hearne" <j...@quantums.info> wrote:
> It will be marked somewhere on the wheel.
> Either stamped on a flat area on the rim, under the centre cap (if it has
> them) or sometimes on the rear of the wheel in the recesses between the bolt
> holes.
> I don't remember any alloys that didn't have the size and the offset stamped
> somewhere.
>
> Jim
>
> --------------------------------------------------

> From: "Sean" <langy2...@hotmail.com>

[nigelp]

Thanks Jim, finally got round to taking a wheel off they are 6.5J,
more importantly the offset was 25, I thought they were 35.

[Jim Hearne]

Ford offset is often quoted as being 35mm but in practice Ford varied
it rather a lot depending on the car and the wheels width.

Jim

[Chris Fairlie]

I fitted Peugeot fitment 15" Wolfrace wheels to Kevin. I think they were
about ET25. This was on the recommendation of John Sampson. The only problem
was the Peugeot hubs and about 2mm larger diameter and the Wolfrace wheels
didn't take the plastic insert they were just machined to fit direct.

Regards

Chris