Xtreame cluch cable placement?

Skip to first unread message

robert greig

Mar 28, 2021, 5:13:20 AMMar 28
to Quantum Owners Group
Hello everyone. 

I've had another cluch cable brake on my Xtreame! 

I know I'm not the first person this has happened to.... 

When watching the new cable being fitted. 
" yes I still cant do any DIY myself " 

I could see the cable was rubbing  the bottom of the bracket as it goes through the fire wall. And goes down to the clutch pedal. 

Sorry I don't take a pic. 

Is there a longer bracket to place the cable lower down so the cable is not rubbing? 

I have the black top Zetec if that helps. 

Pic of bracket with the new clutch cable fitted. 

Is there a known fix? 

Ie drill a hole 25mm lower and add 25mm to the bracket??? 

Regards Robert Greig 

Chris Young

Mar 28, 2021, 5:32:43 AMMar 28
to quantumowners
I think on the zetec and on the pedal box is different.  this is how it looked on my pinto.. not of any use I should think to you, apart from to show I had problems keeping it straight too !

You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To post to this group, send email to quantu...@googlegroups.com
To unsubscribe from this group, send email to quantumowner...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email to quantumowner...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/275537780.1722324.1616922770761%40mail.yahoo.com.

Ian Harrison

Mar 29, 2021, 12:47:29 PMMar 29
to quantu...@googlegroups.com
I seem to remember something about this being an issue on Zetec pedal box models. 

One of the builders did a really good job of documenting his build and I think this was one area he tackled. 


Mar 30, 2021, 8:25:57 AMMar 30
to quantu...@googlegroups.com

I think Rob is in the process of making a new pedal box with a hydraulic clutch. This may be something of interest to us all over the next year once he has all the bits together.



Reply all
Reply to author
0 new messages