Does greater_than 99 work for something like this? Using center_puff?

[Chris Davidson]

Does greater_than 99 work for something like this? Using center_puff?

https://docs.google.com/spreadsheets/d/1Xem6IYiXQrmoY302qNiSGPEeLdJ6jCgxjf1SnsS1bMg/edit?usp=drivesdk

[Fred Davison]

You would get both L2 and R2 when the pressure hits 100.

On Thu, Feb 19, 2026 at 6:34 PM Chris Davidson <jcdi...@gmail.com> wrote:

Does greater_than 99 work for something like this? Using center_puff?

https://docs.google.com/spreadsheets/d/1Xem6IYiXQrmoY302qNiSGPEeLdJ6jCgxjf1SnsS1bMg/edit?usp=drivesdk

--
You received this message because you are subscribed to the Google Groups "QuadStick" group.
To unsubscribe from this group and stop receiving emails from it, send an email to quadstick+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/quadstick/31b2a710-a86a-43e8-9ccf-e4c39dcc20adn%40googlegroups.com.

[Chris Davidson]

100 is also when L2 triggers right? Or does it trigger before 100 if on normal? If so would L2 set to less_than 100 and R2 set to greater_than 99 set to center_puff work?

[Chris Davidson]

Also could you suggest what I should set my sip/puff values should be if I need to adjust them.

[Fred Davison]

There is probably not enough difference between the max pressure and the threshold with 25 and 20.

left_trigger

normal

mp_center_puff

L2 turns on as soon as the threshold is passed.

right_trigger

greater_than 99

mp_center_puff

R2 does not turn on until the pressure increases to the max.

The different outputs on different rows are independent from each other.  L2 is not affected by R2 and visa-versa.  They can both be controlled by the same, or other, inputs, but each has their own state.

[Chris Davidson]

It seems to be too sensitive. Which one should I change so I it’s not so sensitive? Sip/puff max pressure?

[Fred Davison]

These are the factory settings:

The manual has a page about the sip/puff sensors:  https://quadstick.s3.amazonaws.com/documents/user_manual/um/sip_puff_sensors.htm