Titan 2 ps4 setup help

[Chris Davidson]

I just got a titan 2 adapter and I'm not sure if I set it up correctly I updated the firmware on it and checked titan 2 flag with QMP on the quadstick i plugged the titan 2 into the ps4 and got the AU. message on the titan 2 and have the ds4 controller plugged into the USB B port and the quadstick into the USB A port of the titan 2 but the quadstick doesn't seem to control anything.  Do I need to change boot into ps4 mode in the QMP settings or use a different prefs file?  

[Fred Davison]

Both PS4 and T2 flags should be on:

You still need to go through the same PS4/DS4 preparation for the T2.  They use exactly the same technique for authentication that we do.   If it was a problem with the DS4, or cabling, that was causing your authentication problems, they will still exist.

Here are their instructions:  https://www.consoletuner.com/wiki/index.php?id=t2:usage_guides:systems:playstation4

An alternative to the DS4 for authentication that does not have the common issues of the DS4 is the HORI Pad Mini.  It is USB only and has no Bluetooth or powering off issues.

On Mon, Jan 18, 2021 at 12:25 PM Chris Davidson <jcdi...@gmail.com> wrote:

I just got a titan 2 adapter and I'm not sure if I set it up correctly I updated the firmware on it and checked titan 2 flag with QMP on the quadstick i plugged the titan 2 into the ps4 and got the AU. message on the titan 2 and have the ds4 controller plugged into the USB B port and the quadstick into the USB A port of the titan 2 but the quadstick doesn't seem to control anything.  Do I need to change boot into ps4 mode in the QMP settings or use a different prefs file?  

--
You received this message because you are subscribed to the Google Groups "QuadStick" group.
To unsubscribe from this group and stop receiving emails from it, send an email to quadstick+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/quadstick/83e03b8a-09b3-42fc-a947-352495137516n%40googlegroups.com.

[Chris Davidson]

Do you happen to know how to Configure the Output Protocol of the Titan Two to USB Automatic or USB PlayStation 4

[Fred Davison]

Please refer to their user manual.  The link was in the prior email.

[Chris Davidson]

EUREKA! The damn device configuration tab hiding from me at the bottom right gtuner program. Switched from auto to usb-ps4  and have been going for 30 minutes. Finally figured out a solution no more cutting out every 7 minutes YES should have went titan 2 from the start i just suck when it comes to computers never really used one until last year and now I can program a controller I had no idea existed. Thanks Fred and SteamyBiscuit 

[Noah Berge]

I have the Same problem... what did u finally set up?

[Chris Davidson]

https://photos.app.goo.gl/R1MkXjnkhm1Lp4L17

You received this message because you are subscribed to a topic in the Google Groups "QuadStick" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/quadstick/ahERbdlgGdQ/unsubscribe.
To unsubscribe from this group and all its topics, send an email to quadstick+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/quadstick/3a59011c-4a7c-43fa-b85a-467da98a4a33n%40googlegroups.com.

[Noah Berge]

And your settings vor the t2?

[Chris Davidson]

There is a program for the t2 and at the bottom of the right side you need to change the settings to ps4 I'm not home currently in the hospital but that is what I did 

To view this discussion on the web visit https://groups.google.com/d/msgid/quadstick/20b7ddd0-6aed-41b6-bb9a-b62840251007n%40googlegroups.com.

[Chris Davidson]

This is how I finally got it working

https://www.consoletuner.com/wiki/index.php?id=t2:usage_guides:systems:playstation4#first-time_configuration

[zouille Sébastien]

how to perform this operation on the titan two