Weird Drifting

16 views
Skip to first unread message

daniel....@gmail.com

unread,
Dec 12, 2025, 5:25:25 PMDec 12
to QuadStick
I'm trying to help out a client with a Quadstick FPS that has a weird drifting issue.
After 10-20minutes of play moving the Quadstick horizontally or vertically in one axis results also in movement on the other axis. The issue is more pronounced when deflecting the joystick a small amount. There is no drift at all when the joystick is centred only when deflected. Doesn't seem to be any mechanical issue as the movement is smooth and easy to keep centred on up down left and right. The joystick was bumped at one point and the right side of the post attachment has broken off. (Forgot to get a picture but broken piece is circled in below photo)IMG_20251213_080348352.jpg
Any idea what could be causing this? 

Fred Davison

unread,
Dec 12, 2025, 6:47:34 PMDec 12
to daniel....@gmail.com, QuadStick
Make sure nothing is touching the mouthpiece during power up.  That is when the joystick center position is read, along with the pressure sensors' zero pressure reading.  If the joystick is not mechanically centered during this time, the zero point will not be correct.  Wait until the lights stop changing to touch the mouthpiece.

You can de-couple the two axes by using a square dead-zone shape.  When a circular dead-zone is used there will always be a tiny amount of the perpendicular axis.  Where this behavior shows up the most is when the keys WASD are driven directly from the joystick using the "normal" function instead of "greater_than" or a square dead-zone shape.  Two keys will always be pressed and the character will always move on a diagonal. 


Send in a debug report if you continue to have trouble with it and I can take a look at the settings.

How to send in a debugging report with QMP:
  1. Plug the Quadstick into the PC
  2. Start QMP
  3. Wait 20 seconds
  4. Click in the Transcript pane at the bottom of the window.
  5. Press F1 key
  6. Answer prompt to send in the debugging report
  7. EXIT QMP.  Ignore any error message.
  8. Send me an email so I know to go look for the report.






--
You received this message because you are subscribed to the Google Groups "QuadStick" group.
To unsubscribe from this group and stop receiving emails from it, send an email to quadstick+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/quadstick/cc5e6612-ad1a-4719-b305-35fb03e10e2dn%40googlegroups.com.
Reply all
Reply to author
Forward
0 new messages