New member needs help! / Spring to heavy

[Pure46 Rap]

hey guys im new to the quadstick i bought it two weeks ago and i was wondering if its possible to adjust the spring because it fells very heavy to move it smoothly and a new quadstick only cause of this issue is wasted money pls send help

Edit: Maybe its not to heavy for me maybe ive got the wrong Mouse settings.

[Fred Davison]

The centering spring adjustment requires removing the mouthpiece, lip button, front cover (four screws), and the joystick gimbal.  The adjustment screws are on the back of the gimbal.   A 1.5 mm hex wrench is used to adjust them.   There are several fragile wires and tubes in-between the gimbal and the circuit board that need to be in the right places.  Observe their positions before lifting the gimbal off the four standoffs.

The "strong" setting has the spring stretched to the maximum distance.  The light setting is about half-way.  Turn the set screw counter-clockwise to increase the tension.  Clockwise to lighten the tension.

When replacing the gimbal on the four metal standoffs, ensure the wires can freely move when the gimbal is moved up and down, and that the tubing is not pinched.

[Pure46 Rap]

Thank you, Fred, for the fast response! Is there someone in the community who could walk me through my mouse software and help me adjust the settings to make sure everything is set up correctly for my needs? I’d be happy to pay for their time if needed.