function

[akmk...@gmail.com]

how to perform tap for 1 output then hold with the same button for a different output.playing FIFA on PC with keyboard

[Fred Davison]

Are you asking about the "tap" output function, where you release a sip/puff input quickly and it activates the output?

"the same button"  Are you referring to a switch input or does "button" refer to a controller button output on an emulated game controller?

I can interpret your question several ways.   You mention "PC with keyboard", but they can also use game controllers.   Does "button" refer to a keyboard key?

A specific output, either a controller button or a keyboard key, can be used on multiple rows in a configuration spreadsheet to be controlled by more than one input.  In general the different rows do not interfere with each other, but there can be some interactions if using greater_than or less_than output functions, or latches, like toggle or delayed_latch.

Share any spreadsheet you are asking about.

[akmk...@gmail.com]

"button" refer to a keyboard key? yes ,this is the output I want to do      "tap" pad 4   for body feint left       "hold" pad 4  for ball roll left

[Fred Davison]

What do you want to control it with?

kb_keypad_4, pulse 100, some_input         body feint left

kb_keypad_4, pulse 500, some_other_input   body roll left

Play around with the durations of the pulses to find out what the game considers to be a tap vs a hold.

[akmk...@gmail.com]

kb_keypad_4, pulse 100, mp_right_sip         body feint left              kb_keypad_4, pulse 500, mp_right_sip   body roll left 

was looking for something similar to tap and delay on, where you can use the same input for both

[Fred Davison]

You can use tap and delay_on with one input with two different outputs, but not with the same output.  Can you remap the keypad keys to put one of the moves on a different key?

[akmk...@gmail.com]

I couldn't remap my buttons so I changed her on some input got it to work....thanks for your help and patience