Arial Normal Western

0 views
Skip to first unread message

Annabella Wasik

unread,
Jul 21, 2024, 3:01:19 PM7/21/24
to quadleolensto

Introduction

This document describes the procedures for the delegation of au-
thority of zones in the 193.in-addr.arpa domain. As of March
16th 1993 the RIPE NCC has been delegated the authority for the
193.in-addr.arpa domain from the root. Due to the fact that in
the 193.x.y address space blocks of 256 class C network numbers
are further delegated to local registries , the possibility ex-
ists to also delegate the zone for these blocks in the 193.in-
addr.arpa domain. This document describes some guidelines and
procedures for this type of delegation and the delegation of re-
verse zones for individual class C networks in 193.x.y.


A bit more explained

With the assignment of class C network numbers following the CIDR
(RFC 1338) model, in which large chunks of the address space are
delegated to one region, and within that region blocks of class C
network numbers are delegated to service providers and non-
provider registries, some hierarchy in the address space is
created, similar to the hierarchy in the domain name space. Due
to this hierarchy the reverse Domain Name System mapping can also
be delegated in a similar model as used for the normal Domain
Name System. For instance, the RIPE NCC has been assigned the
complete class C address space starting with 193. It is there-
fore possible to delegate the 193.in-addr.arpa domain completely
to the RIPE NCC, instead of each and every reverse mapping in the
193.in-addr.arpa domain to be registered with the INTERNIC. This
implies that all 193.in-addr.arpa resistrations will be done by
the RIPE NCC. Even better, since service providers receive com-
plete class C network blocks from the RIPE NCC, the RIPE NCC can
delegate the reverse registrations for such complete blocks to
these local registries. This implies that customers of these
service providers no longer have to register their reverse domain
mapping with the root, but the service provider have authority
over that part of the reverse mapping. This decreases the work-
load on the INTERNIC and the RIPE NCC, and at the same time in-
crease the service a provider can offer its customers by improve
response times for reverse mapping changes . However there are
some things that need to be examined a bit more closely to avoid
confusion and inconsistencies. These issues are covered in the
next section.


Procedures for the delegation of direct subdomains of 193.in-
addr.arpa

1. A secondary nameserver at ns.ripe.net is mandatory for all
blocks of class C network numbers delegated in the 193.in-
addr.arpa domain.

2. Because of the increasing importance of correct reverse ad-
dress mapping, for all delegated blocks a good set of secondaries
must be defined. There should be at least 2 nameservers for all
blocks delegated, excluding the RIPE NCC secondary.

3. The delegation of a class C block in the 193.in-addr.arpa
domain can be requested by sending in a domain object for the
RIPE database to with all necessary contact
and nameserver information. The RIPE NCC will then forward all
current reverse zones inside this block to the registry, and
after addition of these by the registry, the NCC will check the
working of the reverse server. Once everything is setup proper-
ly, the NCC will delegate the block, and submit the database ob-
ject for inclusion in the database. An example domain object can
be found at the end of this document.

4. All reverse servers for blocks must be reachable from the
whole of the Internet. In short, all servers must meet similar
connectivity requirements as top-level domain servers.

5. Running the reverse server for class C blocks does not imply
that one controls that part of the reverse domain, it only im-
plies that one administers that part of the reverse domain.

6. Before adding individual nets, the administrator of a reverse
domain must check wether all servers to be added for these nets
are indeed setup properly.

7. There are some serious implications when a customer of a ser-
vice provider that uses address space out of the service provider
class C blocks, moves to another service provider. The previous
service provider cannot force its ex-customer to change network
addresses, and will have to continue to provide the appropriate
delegation records for reverse mapping of these addresses, even
though it they are no longer belonging to a customer.

8. The registration of the reverse zones for individual class C
networks will usually be done by the registry administering the
class C block this network has been assigned from. The registry
will make the necessary changes to the zone, and update the net-
work objects in the RIPE database for these networks, to reflect
the correct "rev-srv" fields. In case p margin-bottom: 0.08in; h2 margin-bottom: 0.08in; h2.western font-family: "Arial",sans-serif; font-size: 14pt; font-style: italic; h2.cjk font-family: "MS Mincho"; font-size: 14pt; font-style: italic; h2.ctl font-size: 14pt; font-style: italic; h3 margin-bottom: 0.08in; h3.western font-family: "Arial",sans-serif; h3.cjk font-family: "MS Mincho"; a:link > Abstract This document provides guidelines to Local Internet Registries (LIRs) on the steps to take when the organisation operating an LIR changes ownership (due to a merger, sale or takeover) or stops serving entirely as an LIR.

Following any type of change (such as mergers, acquisitions or takeovers) of an organisation operating an LIR, the RIPE NCC will review the status of any IP address allocations that are held by the new organisation.

arial normal western


Download Zip 🆓 https://bytlly.com/2zwZl5



It is very important to notify the RIPE NCC, if there is a change of contact person(s). This is essential, as only registered contact person(s) can submit Internet resource requests to the RIPE NCC and provide updates to our internal registry files.

If the contact person(s) of the affected LIR has changed, the RIPE NCC may adjust the Assignment Window of the LIR until the contact person(s) is up-to-date with RIPE NCC procedures and RIPE community policies.

It is not necessary to obtain a new Registry Identifier (RegID) if the name of the organisation that operates the LIR changes. The RegID is merely an internal identifier used by the RIPE NCC to distinguish the various LIRs. It does not have to correspond to the legal name of the organisation operating the LIR.

If an LIR insists on changing their RegID, a fee corresponding to the sign-up fee for a new LIR will be charged to cover additional administrative work generated. Please see the current version of the RIPE NCC Charging Scheme available from the RIPE Document Store at: Link:

All transfers of address allocations from one LIR to another LIR (or to a non-LIR) require approval by the RIPE NCC. It is expected that all database objects relating to this allocation be correct and up-to-date before the transfer occurs. Transferred allocations containing a large amount of unassigned address space may be set aside and kept by the RIPE NCC until the other allocations held by the LIR are considered fully used (about 80%). Once the LIR has reached full utilisation in its other allocations, the reserved allocations will be made available to the LIR. For further details on allocation policy, please refer to the document "IPv4 Address Allocation and Assignment Policies in the RIPE NCC Service Region" available from the RIPE Document Store at:

In cases where an organisation operating an LIR takes over one or more LIRs, a takeover fee is due for every LIR taken over (e.g. if three LIRs are taken over, the fee is paid three times). All current outstanding invoices for the LIRs being taken over will also have to be paid in full.

The transfer of address allocations also incurs a takeover fee and does not vary according to the amount of address space being transferred (e.g. if three allocations are being transferred from LIR A to LIR B, the fee is only paid once).

e59dfda104
Reply all
Reply to author
Forward
0 new messages