Issue with Importing Precipitation and Temperature Data in SWAT

Iman Soukrate

unread,

May 21, 2025, 8:24:56 AM5/21/25

to QSWAT+

Hello everyone,

I'm facing an issue with importing my climate data (precipitation and temperature) into SWAT. I followed the required format for the .txt files (columns and order as specified), and I imported the data through the interface.

However, when I run the model, SWAT doesn't seem to recognize the data. It's as if no data were imported at all. I'm wondering if there's a step I might have missed, or if there's a configuration file that needs to be edited manually?

If anyone has experienced this issue or has any suggestions, I would greatly appreciate your help.

Thanks in advance!

Best regards,

tmp1.cli

pcp1.cli

Dr. Stephen Kibe Rwigi

unread,

May 28, 2025, 10:56:05 AM5/28/25

to Iman Soukrate, QSWAT+

Hello Iman

Did you get assistance on this problem?

If not try putting Zero (0) under the step

Best Regards

--
You received this message because you are subscribed to the Google Groups "QSWAT+" group.
To unsubscribe from this group and stop receiving emails from it, send an email to qswatplus+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/qswatplus/8ce7b014-e88b-4599-9a42-d46300a870d3n%40googlegroups.com.

--

Dr. Stephen K. Rwigi

Lecturer

Department of Meteorology

Osman Furkan TOKGÖZ

unread,

Jun 3, 2025, 5:41:14 AM6/3/25

to QSWAT+

Hello Iman,

.cli files have to contain a list of .pcp and .tmp files. Then .pcp and .tmp files should has precipitation and temperature data. Also if you want to add daily data, you should put "0" under the "tstep". Here screenshots that I made:

28 Mayıs 2025 Çarşamba tarihinde saat 17:56:05 UTC+3 itibarıyla Dr. Stephen Kibe Rwigi şunları yazdı: