Hru

[Daff gul]

Hello everyone

I reran QSWAT+, but in my recent run, after delineating the HRUs, the Layers section no longer shows "Actual HRU" or "Full HRU" as it used to. Instead, it only displays "Actual LSU" and "Full LSU." In the previous version, both HRU and LSU layers (actual and full) were available.

Now, even though the HRU layers are not appearing, the next step—Edit Inputs and Run SWAT+—is available. Should I proceed with this step, or does this indicate a mistake in the process?

Has there been a software update that changed this behavior, or could I have done something wrong?

Regards,

[Chris George]

The full and then actual HRUs shapefiles are only produced if you check
the "Create fullhrus" checkbox.

Chris

On 6/26/2025 1:02 AM, Daff gul wrote:
> Hello everyone I reran QSWAT+, but in my recent run, after delineating
> the HRUs, the Layers section no longer shows "Actual HRU" or "Full HRU"
> as it used to. Instead, it only displays "Actual LSU" and "Full LSU. "
> In the previous version, both

> ZjQcmQRYFpfptBannerStart
> This Message Is From an External Sender
> This message came from outside your organization.
> ZjQcmQRYFpfptBannerEnd
>
> *Hello everyone*
>
> I reran QSWAT+, but in my recent run, after delineating the HRUs, the /
> Layers/ section no longer shows "Actual HRU" or "Full HRU" as it used

> to. Instead, it only displays "Actual LSU" and "Full LSU." In the
> previous version, both HRU and LSU layers (actual and full) were available.
>

> Now, even though the HRU layers are not appearing, the next step—/Edit
> Inputs and Run SWAT+/—is available. Should I proceed with this step, or

> does this indicate a mistake in the process?
>
> Has there been a software update that changed this behavior, or could I
> have done something wrong?
>
> Regards,
>
>

> --
> You received this message because you are subscribed to the Google
> Groups "QSWAT+" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to qswatplus+...@googlegroups.com
> <mailto:qswatplus+...@googlegroups.com>.
> To view this discussion visit https://groups.google.com/d/msgid/
> qswatplus/b4b29d2e-3ae9-41f3-b6b5-303f64c86d94n%40googlegroups.com
> <https://urldefense.com/v3/__https://groups.google.com/d/msgid/
> qswatplus/b4b29d2e-3ae9-41f3-b6b5-303f64c86d94n*40googlegroups.com?
> utm_medium=email&utm_source=footer__;JQ!!KwNVnqRv!
> GUlvDVIaJJxknSxdrLK3gkeEdVkEE-
> _SpMVuyNZM_LyDEu0UFr_pMGsyycKN8H3MNcc4jRktn_gbxO0RXSw7$>.

[Chris George]

The full and then actual HRUs shapefiles are only produced if you check
the "Create fullhrus" checkbox.

The actual hrus file, which is derived from the full hrus file, is only
used in visualisation. It does no harm not to create them apart from
preventing visualisation of hrus.

Chris

On 6/26/2025 1:02 AM, Daff gul wrote:

> Hello everyone I reran QSWAT+, but in my recent run, after delineating
> the HRUs, the Layers section no longer shows "Actual HRU" or "Full HRU"
> as it used to. Instead, it only displays "Actual LSU" and "Full LSU. "
> In the previous version, both

> ZjQcmQRYFpfptBannerStart
> This Message Is From an External Sender
> This message came from outside your organization.
> ZjQcmQRYFpfptBannerEnd
>
> *Hello everyone*
>

> I reran QSWAT+, but in my recent run, after delineating the HRUs, the /
> Layers/ section no longer shows "Actual HRU" or "Full HRU" as it used

> to. Instead, it only displays "Actual LSU" and "Full LSU." In the
> previous version, both HRU and LSU layers (actual and full) were available.
>

> Now, even though the HRU layers are not appearing, the next step—/Edit

> Inputs and Run SWAT+/—is available. Should I proceed with this step, or

> does this indicate a mistake in the process?
>
> Has there been a software update that changed this behavior, or could I
> have done something wrong?
>
> Regards,
>
>