Qlab Epson control issue
86 views
Skip to first unread message
Antti Ikonen
Mar 30, 2023, 8:17:44 AM3/30/23
to QLab
Hey all colleagues,
This issue is more related to Epson than Qlab, but since many here are often working with Epsons, I'll try this here.
I'm having an issue with Epson LS12000b projector. The show is running in Qlab, which is controlling ProjectorManager (later PM) app via apple script. Everything works just fine, but until the projector has been off for longer period, it is no longer accepting any network commands. If projector has been off for instance two days, it will no longer be recognized by pinning etc. and PM will see it as offline. When the projector is turned on with the remote controller and then turned off, the software PM will recognize it just fine.
This issue is more related to Epson than Qlab, but since many here are often working with Epsons, I'll try this here.
I'm having an issue with Epson LS12000b projector. The show is running in Qlab, which is controlling ProjectorManager (later PM) app via apple script. Everything works just fine, but until the projector has been off for longer period, it is no longer accepting any network commands. If projector has been off for instance two days, it will no longer be recognized by pinning etc. and PM will see it as offline. When the projector is turned on with the remote controller and then turned off, the software PM will recognize it just fine.
Has anyone else had the same issue?
Thanks a lot in advance!
Antti
Reply all
Reply to author
Forward
0 new messages