cue assigned to audio interface- Multitrack

[Raul Ribeiro]

Hi,

I have the cues playing at same time (Childs) and I was hoping that the device routing was related to my interface (Cymantic audio U24). But isn't.

Qlab communicates with U24 but I only receive audio(summon) in channel 1 and 2 and my idea is sending every cue to a single output, in this case from out 1 to out 12.

What am I doing wrong?

Thank you in advance.

[Raul Ribeiro]

Do I have to assign cue by cue to output? 

[Maik Waschfeld]

Hi Raul,

Your Group cue „100“ is a Timeline cue which tells all the cues, it contains: „Start ALL now.“ (or after each cue’s Pre Wait time). You called them „childs“.

The actual routing happens in each cue’s „Audio Levels“ tab.

With kindest regards…
…Maik Waschfeld

(sent from my MBPro16,2)
also at <mailto:Maik.Wa...@Staatstheater-Stuttgart.de>

--
Contact support anytime: sup...@figure53.com
Follow QLab on Twitter: https://twitter.com/QLabApp
User Group Code of Conduct: https://qlab.app/code-of-conduct/
---
You received this message because you are subscribed to the Google Groups "QLab" group.
To unsubscribe from this group and stop receiving emails from it, send an email to qlab+uns...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/qlab/80035baf-2310-4cdc-b6f5-08d6f83049a9n%40googlegroups.com.
<QLAB MULTI TRACL SHOT.png>

[micpool]

Yes you need to matrix a cue to the output you want

This screenshot shows a stereo cue that is routed to cue outputs 3+4

This screenshot shows the other way of doing this which is to set the matrix in your settings cue templates audio to route to all cue outputs, and just raise the faders for the cue output you want.

You can read more about templates and routing here:

https://qlab.app/cookbook/better-by-default/

Mic

[Raul Ribeiro]

Thank you, yes, I am using the cross point from inputs as the audio Matrix. 

--

Contact support anytime: sup...@figure53.com
Follow QLab on Twitter: https://twitter.com/QLabApp
User Group Code of Conduct: https://qlab.app/code-of-conduct/
---

You received this message because you are subscribed to a topic in the Google Groups "QLab" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/qlab/lap2vM9CNq4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to qlab+uns...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/qlab/6f0b498a-a64d-42c7-b5ae-7c40993fc7bbn%40googlegroups.com.

[micpool]

OK Can you route audio from any other audio application to the DSub analog outputs on your Interface (assuming these are the outputs you are using.)

If you don't have another app to hand ,download the free trial of Twisted Wave and set the output channels for a mono audio file in preferences/devices set channel order.
Mic