QLAB with an LED SCREEN

[Maurice Bruttel]

Hey People, 

I have some questions.. 

We will have shortly a Event with LED Screens and some TimeCode things etc. 

The questions:

We will trigger the Video Content from QLAB and will use the PixelMapper from QLAB. The question:

We will anyway have in some Songs Live Video from the Cameras.. But If we put all the Video Content in the Switch/Videomixer it will destroy all preferences, or not? 

So If we have 4 different Screens..

Screen 1 Snow

Screen 2: more Snow

Screen 3: snow 

Screen 4: more Snow

so then I will have on Screen 2 and 3 Live Video from the Cameras.. How is this possible..? Sorry for this bad English.. I hope you will understand this...

[Tyler]

Hello Maurice-

I recently did a project similar. If the LED screens accept video into their processor, it's no different than a projector. You will need to set your computer to whatever resolution the screens are at. Shouldn't be any need for a pixelmapper, unless the LED screens take DMX only.

If your videomixer is the final piece in the chain before video goes to the walls, it will need to be set for whatever resolution but will allow you to have hardware control over camera going in and out