QLab 5 Network Cue Issue Between 2 MacBooks ( Over Wi-Fi)

[Pace]

Hi everyone,

I am trying to trigger a cue on Mac 1 from Mac 2 over Wi-Fi using QLab 5.5.10 on both machines, but it is not working. I feel like I have used this exact setup before successfully, so I might be missing something simple.

Here are my network details (pings are successful, the Macs can see each other):

• Mac 1 (Target): IP 192.168.0.33 | Subnet 255.255.255.0
• Mac 2 (Sender): IP 192.168.0.34 | Subnet 255.255.255.0
• Router / Gateway: 192.168.0.1

Goal:
I want to trigger Cue 200 on Mac 1 by firing a network cue from Mac 2.

What am I missing in my configuration? Any help would be greatly appreciated!  Let me know if you're missing informations. 

Thanks a lot,

Pace.

[sftechguy]

Missing passcode (look under OSC Access to see what it is on the machine you're sending the command to) would be my first guess.

-s

[sftechguy]

I just noticed you're in Audition mode on one of your machines. I just got burned by this today because I forgot to change network cue behavior (under the Audition mode settings) to "leave cue unchanged". That could also be it.

-s

[Area Tecnica]

Go to workspace that receives to menu controls... Configure it to be controlled by another qlab 

--
Contact support anytime: sup...@figure53.com
User Group Code of Conduct: https://qlab.app/code-of-conduct/
 
Instagram: https://www.instagram.com/Figure53
TikTok: https://www.tiktok.com/@QLab.app
Bluesky: https://bsky.app/profile/qlab.app
---
You received this message because you are subscribed to the Google Groups "QLab" group.
To unsubscribe from this group and stop receiving emails from it, send an email to qlab+uns...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/qlab/5a060d75-4ece-49a9-861a-2fcc1137aa2an%40googlegroups.com.