Loop/repeat lighting cue

[zestie]

I'm running a sound cue of an alarm going off and repeating in appr. half second intervals for 30 seconds. I want to sync a light cue to the sound so there is a pulse of light with every sound of the alarm. 

There is no loop option for light cues like for sound cues that I can see. I could of course have multiple light cues for this but 'm sure there must be better way. What would be the simplest way to achieve this effect? 

Hordur

[Sam Kusnetz]

Hello Hordur

The best way to do is indeed to use multiple cues. I like to use Group cues set to “start first child and go to next cue”, then I fill the Group with Light cues set to auto-continue. Then, the last cue in the Group is a Start cue which re-triggers the first Light cue in the Group.

This effectively turns a Group cue into a step-based lighting effect.

Cheerio

Sam

—

Sam Kusnetz | Figure 53

s...@figure53.com

--
Contact support anytime: sup...@figure53.com
Follow Figure 53 on Twitter: http://twitter.com/Figure53
---
You received this message because you are subscribed to the Google Groups "QLab" group.
To unsubscribe from this group and stop receiving emails from it, send an email to qlab+uns...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/qlab/1dfc7ec5-1725-4a3c-9c42-b42bf96617e8%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[zestie]

Thanks Sam. 

This works well after I spent some time tweaking the parameters. 

Hordur