Controlling Nomad with QLab 4

[Thomas]

Im trying to use OSC to control a computer running the Etc Nomad software by using lab 4. So far i haven't been successful at getting this to work any tips would be very helpful

[Rich Walsh]

Without knowing anything about any of it really I can see 3 problems already:

1. Your cues have red crosses and say “Issued with selected network interface […] No connection” underneath – hover over the red crosses then fix the issue in the tooltip
2. In QLab you appear to be addressing 192.168.1.100 but your console has a static IP of 10.2.17.76 – you need to get QLab and Nomad on the same subnet!
3. Your OSC RX port in Nomad is 0, but you’re addressing port 6000 from QLab (I’m presuming they should match?)

Does that help?

Rich

On 11 Jan 2017, at 17:21, Thomas <wtw...@gmail.com> wrote:

Im trying to use OSC to control a computer running the Etc Nomad software by using lab 4. So far i haven't been successful at getting this to work any tips would be very helpful

--
--
Change your preferences or unsubscribe here:
http://groups.google.com/group/qlab
 
Follow Figure 53 on Twitter: http://twitter.com/Figure53
---
You received this message because you are subscribed to the Google Groups "QLab" group.
To unsubscribe from this group and stop receiving emails from it, send an email to qlab+uns...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/qlab/0519fa5a-fa21-438c-9c0c-0202f712a4d3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
<Screen Shot 2017-01-11 at 11.17.13 AM.png><Screen Shot 2017-01-11 at 11.17.26 AM.png><Screen Shot 2017-01-11 at 11.17.57 AM.png><Screen Shot 2017-01-11 at 11.18.06 AM.png><Screen Shot 2017-01-11 at 11.19.03 AM.png>

[Alexander (Mailing List) Taylor]

I notice that for my cues, the OSC message is formatted differently.  Though I'm using QLab 3 and a Gio, the same message works with our Nomad as well:

Where it's /eos/cue/{Cue List}/{Cue Number}/fire

Alexander

On Jan 11, 2017, at 12:21 PM, Thomas <wtw...@gmail.com> wrote:

Im trying to use OSC to control a computer running the Etc Nomad software by using lab 4. So far i haven't been successful at getting this to work any tips would be very helpful

--
--
Change your preferences or unsubscribe here:
http://groups.google.com/group/qlab
 
Follow Figure 53 on Twitter: http://twitter.com/Figure53
---
You received this message because you are subscribed to the Google Groups "QLab" group.
To unsubscribe from this group and stop receiving emails from it, send an email to qlab+uns...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/qlab/0519fa5a-fa21-438c-9c0c-0202f712a4d3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
<Screen Shot 2017-01-11 at 11.17.13 AM.png><Screen Shot 2017-01-11 at 11.17.26 AM.png><Screen Shot 2017-01-11 at 11.17.57 AM.png><Screen Shot 2017-01-11 at 11.18.06 AM.png><Screen Shot 2017-01-11 at 11.19.03 AM.png>

The Right-To-Know Law provides that most e-mail communications to or from School District employees regarding the business of the School District are government records available to the public upon request. Therefore, this e-mail communication may be subject to public disclosure.