Re: [QLab] Devamp to auto-follow

[Ethan Eldred]

In the devamp cue check “start next cue where current slice ends”, place your next audio cue after the devamp, with a pre wait equal to the length of your last slice of the first audio cue. 

On Wed, Aug 23, 2023 at 1:22 PM Jon Kroff <jmk...@gmail.com> wrote:

I have an audio cue with a slice in the middle that is an infinite loop with a devamp cue to exit and finish the track. I need the next audio cue to auto-follow when the initial cue finishes but is seems like the devamp cue messes this up. I think there is something simple that I am missing.

--
Contact support anytime: sup...@figure53.com
Follow QLab on Twitter: https://twitter.com/QLabApp
User Group Code of Conduct: https://qlab.app/code-of-conduct/
---
You received this message because you are subscribed to the Google Groups "QLab" group.
To unsubscribe from this group and stop receiving emails from it, send an email to qlab+uns...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/qlab/39e5e22b-68ce-4a3d-9060-f9eae9e48804n%40googlegroups.com.

--

---
Ethan Eldred
Sound and Media Artist
MFA Student in Sound Design, Class of '24
UCSD Department of Theatre and Dance
bardsound.com
c. 814.215.3423

[micpool]

If you use 2 devamp cues you don't need to calculate the length after the slice to the end of the cue


One exits the loop and devamps to a second devamp which starts the next cue when the first cue ends

Both devamps have start next checked in the cue's settings and are enclosed in fire first (and go to next cue) groups.

Screen recording attached

Mic