MSC via USB MIDI interface on a Martin M1

[nizer]

Anyone ever gotten a M1 to accept a USB MIDI interface to run MSC on this light console?

[Drew Dalzell]

I've done MSC on the Martin Maxxys, but I don't think I've tried to install a generic USB MIDI interface on the M1.  I have been able to do it on Martin M-PC, so in theory it should work.  You can also send Telnet commands to the M1. With Qlab you'd need to do it using Applescript and Terminal, but it is possible.

I'd still really like to see a native Telnet command in Qlab.

Drew

[nizer]

I got this from Martin.
-----------------------------
Hello Mark,

I have some news about this. The drivers are actually only available when using M-PC (as this is a ‘normal’ Windows version). If you are using a console, Windows EMBEDDED is installed on it. And unfortunately, it does not have the generic MIDI driver onboard. So you will need to use the Martin MIDI PCB that is provided separately for some Martin consoles, where MIDI is not build in yet. If you want to use your own MIDI device, you will need to install the drivers manually.

You will need to switch on MIDI support in the MENU.