Symphony V120 Flash File HW2 DA Fix All Versone Care Firmware

[Phillipp Schneeberger]

Symphony V120 Flash File HW2 DA Fix All Versone Care Firmware

Symphony V120 is a budget-friendly smartphone that runs on Android 7.0 Nougat. It has a 5-inch display, a quad-core processor, 1 GB of RAM, and 8 GB of internal storage. However, some users may encounter issues with the flash file HW2 DA, which is responsible for booting the device and communicating with the hardware. Some of the common symptoms of a corrupted flash file HW2 DA are:

Symphony V120 Flash File HW2 DA Fix All Versone Care Firmware

DOWNLOAD https://ckonti.com/2ySpyJ

• The device does not power on or gets stuck on the logo screen.

• The device shows a black screen or a white screen with lines.

• The device does not recognize the SIM card or the memory card.

• The device does not connect to the computer or the SP Flash Tool.

• The device displays an error message such as "BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)" or "STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)".

If you are facing any of these problems, don't worry. There is a way to fix them using the care firmware. The care firmware is a special version of the stock firmware that can bypass the flash file HW2 DA and flash the device successfully. In this article, we will show you how to use the care firmware to restore your device to its original state.

How to Download and Install the Care Firmware for Symphony V120

Before you proceed, make sure that you have backed up your important data and that your device has at least 50% battery charge. You will also need a USB cable and a computer with Windows OS. Follow these steps to download and install the care firmware for Symphony V120:

• Download the care firmware for Symphony V120 from [here]. The file size is about 1.5 GB and it contains all the necessary files and tools.

• Extract the zip file to a folder on your computer. You will see a folder named "Symphony_V120_HW2_V10_DA_Care_Firmware" that contains several subfolders and files.

• Install the USB drivers for Symphony V120 from the "Drivers" folder. This will allow your computer to recognize your device when you connect it.

• Open the "Flash Tool" folder and run the "flash_tool.exe" file as administrator. This will launch the SP Flash Tool, which is a software that can flash your device.

• Click on the "Download" tab and then click on the "Scatter-loading" button. A window will pop up where you can browse and select the scatter file for Symphony V120. The scatter file is located in the "Symphony_V120_HW2_V10_DA_Care_Firmware" folder and it has a name like "MT6580_Android_scatter.txt". Click on "Open" after selecting it.

• The SP Flash Tool will load all the files from the care firmware automatically. Make sure that all the boxes are checked and that the "Download Only" option is selected in the drop-down menu.

• Turn off your Symphony V120 and remove the battery if possible. Then connect it to your computer using a USB cable. Press and hold the volume down button or both volume buttons until you see a red bar on the SP Flash Tool.

• The red bar will be followed by a yellow bar, indicating that the flashing process has started. Wait patiently until you see a green circle with a check mark, indicating that the flashing process has completed successfully.

• Disconnect your device from your computer and insert the battery if you removed it earlier. Then turn on your device and wait for it to boot up normally.

• Congratulations! You have successfully flashed your Symphony V120 with the care firmware. You can now enjoy using your device without any issues.

Troubleshooting Tips

If you encounter any problems while flashing your Symphony V120 with the care firmware, here are some tips that may help you:

• If you get an error message such as "BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)" or "STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)", try changing the USB port or the USB cable. You can also try using a different computer or reinstalling the USB drivers.

• If you get an error message such as "PMT changed for the ROM; it must be downloaded", try formatting your device before flashing. To do this, click on the "Format" tab on the SP Flash Tool and then click on "Start". Wait until you see a green circle with a check mark and then proceed with the flashing process.

• If you get an error message such as "BROM ERROR: S_DL_PMT_ERR_NO_SPACE (5069)", try unchecking the "Preloader" box on the SP Flash Tool and then flashing again.

• If your device does not power on or gets stuck on the logo screen after flashing, try doing a factory reset. To do this, turn off your device and then press and hold the power button and the volume up button until you see the recovery mode menu. Use the volume buttons to navigate and the power button to select. Choose "wipe data/factory reset" and then confirm. Wait until the process is done and then reboot your device.

Conclusion

In this article, we have shown you how to fix your Symphony V120 flash file HW2 DA problem using the care firmware. We hope that this article was helpful and that you were able to restore your device to its original state. If you have any questions or feedback, feel free to leave a comment below.

Source: [Symphony V120 Flash File HW2 DA Fix All Versone Care Firmware]

6500f7198a