Interfaces config for active repeater
1 view
Skip to first unread message
Houps
Oct 6, 2009, 3:49:41 PM10/6/09
to pyramidlinux
I'm having a heck of a time trying to figure out how to properly
config the interfaces for a two radio active repeater. I have a
net4826, two XR2 radios, a yagi and an omni antenna. I'm trying to
configure them so one radio will connect to the public AP at the FBO
building and rebrodcast as a new AP at our hanger on the other side of
the airport. Has any one got something like this to work before?
R/S
Scott
config the interfaces for a two radio active repeater. I have a
net4826, two XR2 radios, a yagi and an omni antenna. I'm trying to
configure them so one radio will connect to the public AP at the FBO
building and rebrodcast as a new AP at our hanger on the other side of
the airport. Has any one got something like this to work before?
R/S
Scott
Vacio
Oct 6, 2009, 3:55:44 PM10/6/09
to pyrami...@googlegroups.com
Hi Scott,
Yes, it should work fine. Did you get my off-list reply from the weekend?
I'll post it here if that makes it easier.
It is straight-forward if you use the pyramid web interface.
/Rob
Yes, it should work fine. Did you get my off-list reply from the weekend?
I'll post it here if that makes it easier.
It is straight-forward if you use the pyramid web interface.
/Rob
Reply all
Reply to author
Forward
0 new messages