XRayOps Crashing When Clicking "HandShake"

[Lillian Chao]

I am running a Buker Tracer III-V+ and have been experiencing crashes when attempting to change settings in XRayOps. Clicking "HandShake" seems to cause the program to crash. Has anyone else come across this issue/found any fixes?

Best,

Lillian Chao

Undergraduate Student, University of Washington

[Alexander Seyfarth Mineralogical Analysis]

Which operating system and connection (USB or Serial).

Congratulations for the old-timer still running!

<xrayopserror.jpg>

--
Visit the pXRF for Cultural Heritage website at:
https://sites.google.com/site/pxrfgroup/
---
You received this message because you are subscribed to the Google Groups "pXRF for Cultural Heritage" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pxrf+uns...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/pxrf/8e9f33bd-4473-40fa-8865-8e2090a57cd1n%40googlegroups.com.
<xrayopserror.jpg>

Alexander Seyfarth Mineralogical Analysis

miner...@gmail.com

Janesville USA

[Lillian Chao]

It's running a serial to USB adapter! (Serial out of the pXRF, USB into the laptop)

[Aaron Shugar]

It is hard to see from the screen shot. If I am not mistaken, the handshake cannot be high speed for this model. That might be the problem

Aaron

--

Visit the pXRF for Cultural Heritage website at:
https://sites.google.com/site/pxrfgroup/
---
You received this message because you are subscribed to the Google Groups "pXRF for Cultural Heritage" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pxrf+uns...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/pxrf/8e9f33bd-4473-40fa-8865-8e2090a57cd1n%40googlegroups.com.

--

Aaron Shugar
aaron....@gmail.com
shugar@queensu.ca