--
The Personal Telco Project - https://personaltelco.net/
Donate to PTP: https://personaltelco.net/donate
To post to this group, send email to ptp-g...@googlegroups.com
---
You received this message because you are subscribed to the Google Groups "ptp-general" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ptp-general...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ptp-general/7cfd95e0-66ac-4cc2-8bdf-6fc33ac3810b%40googlegroups.com.
Cool! Do you have photos of the WLE900VX installed?
On Fri, Nov 29, 2019 at 7:23 PM <hurr...@gmail.com> wrote:
--Hi there! My name is Martin K; I am a volunteer at a hackerspace in Burlington, VT. Apologies if this is not the appropriate location but I wanted to share:The MR24s will work with different WLAN cards, in particular, for 11ac operation, the WLE900VX works fine, just requiring opkg installations of `kmod-ath10k-ct` and the respective `ath10k-firmware-qca988x-ct`, along with an /etc/modules.d/ath10k file containing "ath10k_pci irq_mode=1" that tells ath10k_pci to load under irq_mode 1. It's great hardware as-is under OpenWrt, but I jumped out of my seat when I got it to work because I bought a few of them specifically with mind to use with a QCA9880v2-based module (one of the only ath10k's that can properly do IBSS at the time I started searching).Don't install the `kmod` before you add that file and firmware! ath10k-ct will crash if you do.
The Personal Telco Project - https://personaltelco.net/
Donate to PTP: https://personaltelco.net/donate
To post to this group, send email to ptp-g...@googlegroups.com
---
You received this message because you are subscribed to the Google Groups "ptp-general" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ptp-g...@googlegroups.com.