big pano problem
20 views
Skip to first unread message
תמיר אורבאום - צלם 360
May 6, 2012, 7:29:45 AM5/6/12
to pt...@googlegroups.com
hi all
i shoot a pano with my D300s + 70-200 on 190mm
now i'm trying to stitch it but my computer it verey slow
it's 167 pic's
in 4 rows
how can i stitch it with out baying a new computer
win 7 - 32 bit
Q8200
4 GB RAM
can i stitch it row by row
and than stitch them together?
--
i shoot a pano with my D300s + 70-200 on 190mm
now i'm trying to stitch it but my computer it verey slow
it's 167 pic's
in 4 rows
how can i stitch it with out baying a new computer
win 7 - 32 bit
Q8200
4 GB RAM
can i stitch it row by row
and than stitch them together?
--
Joergen Geerds
May 6, 2012, 9:55:05 AM5/6/12
to pt...@googlegroups.com
On Sunday, May 6, 2012 7:29:45 AM UTC-4, תמיר אורבאום - צלם 360 wrote:
i shoot a pano with my D300s + 70-200 on 190mm
now i'm trying to stitch it but my computer it verey slow
it's 167 pic's
in 4 rows
how can i stitch it with out baying a new computer
win 7 - 32 bit
Q8200
4 GB RAM
first solution: just let it stitch, how ever long it takes. do something else in the mean time (household chores, family stuff, sleeping etc)... ptgui will finish the stitching eventually.
second solution: restart your computer, launch ONLY ptgui (no other application!), set the ram usage to 2.5-3GB. set an internal drive for ptgui scratch/temp, since external drives (USB/FW) are notoriously slow. set the interpolator to bicubic or similar (avoid lanczos1024 etc), and start your render, and wait. ptgui will finish eventually.
third solution: see https://groups.google.com/d/msg/ptgui/5sv8C1BhbE4/bYf2tzF0Y00J but this is only if you are serious about your panoara work, and if it's worth the effort, otherwise go for 1/2 above.
UtahBob
May 6, 2012, 11:07:22 AM5/6/12
to pt...@googlegroups.com
Yes, let it run. I have a Vista 32bit 3gb ram Pentium Dual CPU E2200 @2.2 Ghz. I do have a scratch disk but at 5400 rpm. A 300 image at 10mp per image takes about 16 minutes to load in and then another hour to align. It took 4 hours to stich into a photoshop large blended pano but note that I was using nikon raw nef as the source and stiched the pano at 16 bit using the sync 256 interpolator. With the 12mp of the D300 and double the files, I'd expect that you would be at a much longer time than my stitch but I don't know how your processor compares.
For me, if I want to speed things up, I use the jpg file the camera creates and use that to stitch at 8 bit using the standard interpolator. On the larger stitches what I feel is helpful is to stitch a smaller preview version at maybe 2000 pixel height to confirm everything looks right before committing to the final large stitch. You need to stitch the preview at a level that you can review the pano to determine is there are ghosts and such that need fixing.
I've also excluded the ptgui application and the source and destination directories from the antivirus scanning. This showed up as a 2 minute save on that 16 minute load mentioned above cutting it down to 14 minutes. Not a lot but everything helps.
תמיר אורבאום - צלם 360
May 6, 2012, 12:04:29 PM5/6/12
to pt...@googlegroups.com
the problem that it's does not let me stitch the pano
i have convert from NEF to JPG in the low rez
and still... it doesn't work at all
the erro it: there is not enough memory to complete this project
i have convert from NEF to JPG in the low rez
and still... it doesn't work at all
the erro it: there is not enough memory to complete this project
--
You received this message because you are subscribed to the Google Groups "PTGui" group.
To post to this group, send email to pt...@googlegroups.com
To unsubscribe from this group, send email to ptgui+un...@googlegroups.com
Please do not add attachments to your posts; instead upload your files at a file sharing site (for example http://ge.tt/ ) and include a link in your message.
For more options, visit this group at http://groups.google.com/group/ptgui
PTGui Support
May 6, 2012, 12:21:18 PM5/6/12
to pt...@googlegroups.com
Hi תמיר אורבאום,
"there is not enough memory to complete this project": this does not
seem to be a PTGui error message. Can you show a screenshot of the exact
error text?
Joost
On 6-5-2012 18:04, תמיר אורבאום - צלם 360 wrote:
> the problem that it's does not let me stitch the pano
> i have convert from NEF to JPG in the low rez
> and still... it doesn't work at all
>
> the erro it: there is not enough memory to complete this project
>
>
>
> On Sun, May 6, 2012 at 4:55 PM, Joergen Geerds <jge...@gmail.com
> <mailto:jge...@gmail.com>> wrote:
>
> On Sunday, May 6, 2012 <tel:2012> 7:29:45 AM UTC-4, תמיר אורבאום -
> <mailto:pt...@googlegroups.com>
> <mailto:ptgui%2Bunsu...@googlegroups.com>
> סיורים וירטואלים <http://www.360vr.tamiror.com/>
"there is not enough memory to complete this project": this does not
seem to be a PTGui error message. Can you show a screenshot of the exact
error text?
Joost
On 6-5-2012 18:04, תמיר אורבאום - צלם 360 wrote:
> the problem that it's does not let me stitch the pano
> i have convert from NEF to JPG in the low rez
> and still... it doesn't work at all
>
> the erro it: there is not enough memory to complete this project
>
>
>
> On Sun, May 6, 2012 at 4:55 PM, Joergen Geerds <jge...@gmail.com
>
> On Sunday, May 6, 2012 <tel:2012> 7:29:45 AM UTC-4, תמיר אורבאום -
> <mailto:ptgui%2Bunsu...@googlegroups.com>
> Please do not add attachments to your posts; instead upload your
> files at a file sharing site (for example http://ge.tt/ ) and
> include a link in your message.
> For more options, visit this group at
> http://groups.google.com/group/ptgui
>
>
>
>
> --
> בברכה
> תמיר אורבאום
> 050-3278232
> האתר שלי <http://www.tamiror.com/>
> files at a file sharing site (for example http://ge.tt/ ) and
> include a link in your message.
> For more options, visit this group at
> http://groups.google.com/group/ptgui
>
>
>
>
> --
> בברכה
> תמיר אורבאום
> 050-3278232
> סיורים וירטואלים <http://www.360vr.tamiror.com/>
UtahBob
May 6, 2012, 12:25:38 PM5/6/12
to pt...@googlegroups.com
The 300 image 10mp project I referenced above that results in stitching a 1.55 Gigapixel pano comes up with a required temp space of 37.5 Gb. I would not be surprised if your project would require 100 Gb to stitch. You would need this as available space on your hard drive. You could put this on an external but you would be penalized with the lower speed interface.
Go to the project menu and select the last item - calculate required temporary disk space. You'd want that as a minimum but really you want more to keep the machine stable.
תמיר אורבאום - צלם 360
May 6, 2012, 12:31:22 PM5/6/12
to pt...@googlegroups.com
screenshot
האתר שלי <http://www.tamiror.com/>
Please do not add attachments to your posts; instead upload your
files at a file sharing site (for example http://ge.tt/ ) and
include a link in your message.
For more options, visit this group at
http://groups.google.com/group/ptgui
--
בברכה
תמיר אורבאום
050-3278232
סיורים וירטואלים <http://www.360vr.tamiror.com/>
--
You received this message because you are subscribed to the Google
Groups "PTGui" group.
To post to this group, send email to pt...@googlegroups.com
To unsubscribe from this group, send email to
Please do not add attachments to your posts; instead upload your files
at a file sharing site (for example http://ge.tt/ ) and include a link
in your message.
For more options, visit this group at http://groups.google.com/group/ptgui
--
You received this message because you are subscribed to the Google Groups "PTGui" group.
To post to this group, send email to pt...@googlegroups.com
To unsubscribe from this group, send email to ptgui+unsubscribe@googlegroups.com
Please do not add attachments to your posts; instead upload your files at a file sharing site (for example http://ge.tt/ ) and include a link in your message.
For more options, visit this group at http://groups.google.com/group/ptgui
--
PTGui Support
May 6, 2012, 12:42:29 PM5/6/12
to pt...@googlegroups.com
You need to reduce the 'use at most ...% of RAM memory' setting, in
Options - Advanced.
Try first with a low value (10%), this should prevent the error. Then
increase the value until the error appears. The optimum value is
somewhere inbetween.
To stitch large panoramas fast you really need a 64 bit machine and at
least 8GB of RAM.
Joost
On 6-5-2012 18:31, תמיר אורבאום - צלם 360 wrote:
> screenshot
>
> On Sun, May 6, 2012 at 7:21 PM, PTGui Support <sup...@ptgui.com
> <mailto:sup...@ptgui.com>> wrote:
>
> Hi תמיר אורבאום,
>
> "there is not enough memory to complete this project": this does not
> seem to be a PTGui error message. Can you show a screenshot of the
> exact error text?
>
> Joost
>
>
>
> On 6-5-2012 18:04, תמיר אורבאום - צלם 360 wrote:
>
> the problem that it's does not let me stitch the pano
> i have convert from NEF to JPG in the low rez
> and still... it doesn't work at all
>
> the erro it: there is not enough memory to complete this project
>
>
>
> On Sun, May 6, 2012 <tel:2012> at 4:55 PM, Joergen Geerds
> <jge...@gmail.com <mailto:jge...@gmail.com>
> <mailto:jge...@gmail.com <mailto:jge...@gmail.com>>> wrote:
>
> On Sunday, May 6, 2012 <tel:2012> <tel:2012 <tel:2012>>
> <mailto:ptgui%2Bunsu...@googlegroups.com>
> <mailto:ptgui%2Bunsubscribe@__googlegroups.com
> <mailto:ptgui%252Buns...@googlegroups.com>>
> 050-3278232 <tel:050-3278232>
> האתר שלי <http://www.tamiror.com/>
> סיורים וירטואלים <http://www.360vr.tamiror.com/__>
> <mailto:ptgui%2Bunsu...@googlegroups.com>
> <mailto:ptgui%2Bunsu...@googlegroups.com>
Options - Advanced.
Try first with a low value (10%), this should prevent the error. Then
increase the value until the error appears. The optimum value is
somewhere inbetween.
To stitch large panoramas fast you really need a 64 bit machine and at
least 8GB of RAM.
Joost
On 6-5-2012 18:31, תמיר אורבאום - צלם 360 wrote:
> screenshot
>
> On Sun, May 6, 2012 at 7:21 PM, PTGui Support <sup...@ptgui.com
> <mailto:sup...@ptgui.com>> wrote:
>
> Hi תמיר אורבאום,
>
> "there is not enough memory to complete this project": this does not
> seem to be a PTGui error message. Can you show a screenshot of the
> exact error text?
>
> Joost
>
>
>
> On 6-5-2012 18:04, תמיר אורבאום - צלם 360 wrote:
>
> the problem that it's does not let me stitch the pano
> i have convert from NEF to JPG in the low rez
> and still... it doesn't work at all
>
> the erro it: there is not enough memory to complete this project
>
>
>
> <jge...@gmail.com <mailto:jge...@gmail.com>
> <mailto:jge...@gmail.com <mailto:jge...@gmail.com>>> wrote:
>
> On Sunday, May 6, 2012 <tel:2012> <tel:2012 <tel:2012>>
> 7:29:45 AM UTC-4, תמיר אורבאום -
>
> צלם 360 wrote:
>
> i shoot a pano with my D300s + 70-200 on 190mm
> now i'm trying to stitch it but my computer it verey slow
> it's 167 pic's
> in 4 rows
> how can i stitch it with out baying a new computer
> win 7 - 32 bit
> Q8200
> 4 GB RAM
>
>
> first solution: just let it stitch, how ever long it takes. do
> something else in the mean time (household chores, family stuff,
> sleeping etc)... ptgui will finish the stitching eventually.
>
> second solution: restart your computer, launch ONLY ptgui
> (no other
> application!), set the ram usage to 2.5-3GB. set an internal
> drive
> for ptgui scratch/temp, since external drives (USB/FW) are
> notoriously slow. set the interpolator to bicubic or similar
> (avoid
> lanczos1024 etc), and start your render, and wait. ptgui
> will finish
> eventually.
>
> third solution: see
> https://groups.google.com/d/__msg/ptgui/5sv8C1BhbE4/__bYf2tzF0Y00J
>
> צלם 360 wrote:
>
> i shoot a pano with my D300s + 70-200 on 190mm
> now i'm trying to stitch it but my computer it verey slow
> it's 167 pic's
> in 4 rows
> how can i stitch it with out baying a new computer
> win 7 - 32 bit
> Q8200
> 4 GB RAM
>
>
> first solution: just let it stitch, how ever long it takes. do
> something else in the mean time (household chores, family stuff,
> sleeping etc)... ptgui will finish the stitching eventually.
>
> second solution: restart your computer, launch ONLY ptgui
> (no other
> application!), set the ram usage to 2.5-3GB. set an internal
> drive
> for ptgui scratch/temp, since external drives (USB/FW) are
> notoriously slow. set the interpolator to bicubic or similar
> (avoid
> lanczos1024 etc), and start your render, and wait. ptgui
> will finish
> eventually.
>
> third solution: see
> <https://groups.google.com/d/msg/ptgui/5sv8C1BhbE4/bYf2tzF0Y00J> but
> this is only if you are serious about your panoara work, and
> if it's
> worth the effort, otherwise go for 1/2 above.
>
> --
> You received this message because you are subscribed to the
> Google
> Groups "PTGui" group.
> To post to this group, send email to pt...@googlegroups.com
> <mailto:pt...@googlegroups.com>
> <mailto:pt...@googlegroups.com <mailto:pt...@googlegroups.com>__>
> this is only if you are serious about your panoara work, and
> if it's
> worth the effort, otherwise go for 1/2 above.
>
> --
> You received this message because you are subscribed to the
> Groups "PTGui" group.
> To post to this group, send email to pt...@googlegroups.com
> <mailto:pt...@googlegroups.com>
>
> To unsubscribe from this group, send email to
> ptgui+unsubscribe@__googlegroups.com
> To unsubscribe from this group, send email to
> <mailto:ptgui%2Bunsu...@googlegroups.com>
> <mailto:ptgui%2Bunsubscribe@__googlegroups.com
> <mailto:ptgui%252Buns...@googlegroups.com>>
>
> Please do not add attachments to your posts; instead upload your
> files at a file sharing site (for example http://ge.tt/ ) and
> include a link in your message.
> For more options, visit this group at
> http://groups.google.com/__group/ptgui
> Please do not add attachments to your posts; instead upload your
> files at a file sharing site (for example http://ge.tt/ ) and
> include a link in your message.
> For more options, visit this group at
> 050-3278232 <tel:050-3278232>
> האתר שלי <http://www.tamiror.com/>
> סיורים וירטואלים <http://www.360vr.tamiror.com/__>
>
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui" group.
> To post to this group, send email to pt...@googlegroups.com
> <mailto:pt...@googlegroups.com>
> To unsubscribe from this group, send email to
> ptgui+unsubscribe@__googlegroups.com
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui" group.
> To post to this group, send email to pt...@googlegroups.com
> <mailto:pt...@googlegroups.com>
> To unsubscribe from this group, send email to
> <mailto:ptgui%2Bunsu...@googlegroups.com>
> Please do not add attachments to your posts; instead upload your
> files
> at a file sharing site (for example http://ge.tt/ ) and include
> a link
> in your message.
> For more options, visit this group at
> http://groups.google.com/__group/ptgui
> files
> at a file sharing site (for example http://ge.tt/ ) and include
> a link
> in your message.
> For more options, visit this group at
> <http://groups.google.com/group/ptgui>
>
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui" group.
> To post to this group, send email to pt...@googlegroups.com
> ptgui+unsubscribe@__googlegroups.com
>
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui" group.
> To post to this group, send email to pt...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>
> Please do not add attachments to your posts; instead upload your
> files at a file sharing site (for example http://ge.tt/ ) and
> include a link in your message.
> For more options, visit this group at
> http://groups.google.com/__group/ptgui
> files at a file sharing site (for example http://ge.tt/ ) and
> include a link in your message.
> For more options, visit this group at
> <http://groups.google.com/group/ptgui>
>
>
>
>
> --
> בברכה
> תמיר אורבאום
> 050-3278232
> האתר שלי <http://www.tamiror.com/>
> סיורים וירטואלים <http://www.360vr.tamiror.com/>
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui" group.
> To post to this group, send email to pt...@googlegroups.com
> To unsubscribe from this group, send email to
> ptgui+un...@googlegroups.com
>
>
>
>
> --
> בברכה
> תמיר אורבאום
> 050-3278232
> האתר שלי <http://www.tamiror.com/>
> סיורים וירטואלים <http://www.360vr.tamiror.com/>
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui" group.
> To post to this group, send email to pt...@googlegroups.com
> To unsubscribe from this group, send email to
Reply all
Reply to author
Forward
0 new messages