How to i start a new batch sticher?

[Sweekar Bhushan]

I capture 4 images with 90 degree turn angle to create 360 photo. So I have around 40 images i.e. 10 numbers of 360 photos. 

How do I start to create a batch sticher from my new PTGUI PRO.

Please help!

Thanks in advance 

[John Houghton]

On Wednesday, July 25, 2018 at 1:27:06 PM UTC+1, Sweekar Bhushan wrote:

I capture 4 images with 90 degree turn angle to create 360 photo. So I have around 40 images i.e. 10 numbers of 360 photos. 

How do I start to create a batch sticher from my new PTGUI PRO.

You need to load the Batch Builder from the Tools menu. You can create the 10 projects either with or without the help of a template. A template is simply a project file from a previous successful similar stitch.  PTGui will load in image and lens parameters from the template to assist the processing. Click on the Help button for further details.

John

[PTGui Support]

Hi,

Basically it goes like this:

- go to Tools - Batch Builder
- click 'Detect Panoramas'
- select 'Multiple panoramas per folder with a fixed number of images'
- click Browse and select the folder with your images
- Images per panorama: 4
- click 'Detect Panoramas' button

You should now see groups of 4 images, one for each panorama. Proceed as
follows:

- use template: New Empty Project
- click on Generate Projects
- when asked whether to launch the Batch Stitcher, click Yes

PTGui has now created 10 project files, and they are being stitched by
the batch stitcher. If any of the panoramas need modifications you can
open the corresponding project file later.

This is the basic workflow. There are more options; please review the
tooltips in the Batch Builder and press the Help button to read more.

Kind regards,

Joost Nieuwenhuijse
www.ptgui.com

> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To post to this group, send email to pt...@googlegroups.com
> <mailto:pt...@googlegroups.com>.
> Visit this group at https://groups.google.com/group/ptgui.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/8296ebc2-b059-4926-b472-fcfc44293b8a%40googlegroups.com
> <https://groups.google.com/d/msgid/ptgui/8296ebc2-b059-4926-b472-fcfc44293b8a%40googlegroups.com?utm_medium=email&utm_source=footer>.
> For more options, visit https://groups.google.com/d/optout.

[Jan Van Bever Donker]

Hi,

I'm new to PTgui and have used the programme successfully  to stitch linear panoramas of various sizes, the largest being a composite of 310  images. All of these  in both version 10 and 11.5.

I would like to use the HDR capability in 11.6 and have a panorama of 4 rows of 10 images,  each bracketed with one under and correct and one over exposed done with the GigaPan robotic head.

What is the best workflow to produce an HDR image ?

Thanks for your help

Jan

On Thu, Jul 26, 2018 at 5:40 AM, <angus1...@gmail.com> wrote:

Hi！Whether you know Panorama camera called TE720PRO , this camera can shoot a panoramic photo by one key，and stitch lots of panoramic photos by one key. It’ s more easier for u both  hardware and software. Just come to know.  https://www.teche720.com/en/index.html

在 2018年7月25日星期三 UTC+8下午8:27:06，Sweekar Bhushan写道：

I capture 4 images with 90 degree turn angle to create 360 photo. So I have around 40 images i.e. 10 numbers of 360 photos. 

How do I start to create a batch sticher from my new PTGUI Pro

Please help!

Thanks in advance 

--

You received this message because you are subscribed to the Google Groups "PTGui Support" group.

To unsubscribe from this group and stop receiving emails from it, send an email to ptgui+unsubscribe@googlegroups.com.
To post to this group, send email to pt...@googlegroups.com.

Visit this group at https://groups.google.com/group/ptgui.

To view this discussion on the web visit https://groups.google.com/d/msgid/ptgui/0daf2f76-93ae-4b9b-bbbb-5b67e04afc8d%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

Disclaimer - This e-mail is subject to UWC policies and e-mail disclaimer published on our website at: https://www.uwc.ac.za/Pages/emaildisclaimer.aspx

[Erik Krause]

Am 26.07.2018 um 11:27 schrieb Jan Van Bever Donker:

> What is the best workflow to produce an HDR image ?

Provided you used full manual mode simply throw all images on PTGui. It
will recognize repeating exposure patterns and offer to link bracketed
series. In V11 you get a tonemapped / exposure fused view in pano editor.

For more information see http://www.ptgui.com/support.html#7_1

--
Erik Krause

---
Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
https://www.avast.com/antivirus

[Sweekar Bhushan]

Thankyou so much!

But how do I crease the resolution of the panorama to 100%

To unsubscribe from this group and stop receiving emails from it, send an email to ptgui+un...@googlegroups.com.
To post to this group, send email to pt...@googlegroups.com.

Visit this group at https://groups.google.com/group/ptgui.

To view this discussion on the web visit https://groups.google.com/d/msgid/ptgui/bb8aaa5c-c73e-cca2-3d42-4bd6a695c054%40ptgui.com.

For more options, visit https://groups.google.com/d/optout.

--

Sweekar Bhushan

[PTGui Support]

Hi,

This should be the default. Check the Create Panorama tab, it should say
'fix at 100% of optimum size'.

Kind regards,

Joost Nieuwenhuijse
www.ptgui.com

> www.ptgui.com <http://www.ptgui.com>

>
> On 25/07/2018 14:27, Sweekar Bhushan wrote:
> > I capture 4 images with 90 degree turn angle to create 360 photo.
> So I
> > have around 40 images i.e. 10 numbers of 360 photos.
> > How do I start to create a batch sticher from my new PTGUI PRO.
> >
> > Please help!
> >
> > Thanks in advance
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to ptgui+un...@googlegroups.com

> <mailto:ptgui%2Bunsu...@googlegroups.com>
> > <mailto:ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>>.

> > To post to this group, send email to pt...@googlegroups.com
> <mailto:pt...@googlegroups.com>

> > <mailto:pt...@googlegroups.com <mailto:pt...@googlegroups.com>>.

> > Visit this group at https://groups.google.com/group/ptgui.
> > To view this discussion on the web visit
> >
> https://groups.google.com/d/msgid/ptgui/8296ebc2-b059-4926-b472-fcfc44293b8a%40googlegroups.com
>
> >
> <https://groups.google.com/d/msgid/ptgui/8296ebc2-b059-4926-b472-fcfc44293b8a%40googlegroups.com?utm_medium=email&utm_source=footer>.
> > For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to ptgui+un...@googlegroups.com

> <mailto:ptgui%2Bunsu...@googlegroups.com>.

> To post to this group, send email to pt...@googlegroups.com
> <mailto:pt...@googlegroups.com>.
> Visit this group at https://groups.google.com/group/ptgui.
> To view this discussion on the web visit

> https://groups.google.com/d/msgid/ptgui/bb8aaa5c-c73e-cca2-3d42-4bd6a695c054%40ptgui.com.
> For more options, visit https://groups.google.com/d/optout.
>
>
>
> --
> Sweekar Bhushan
>

> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To post to this group, send email to pt...@googlegroups.com
> <mailto:pt...@googlegroups.com>.
> Visit this group at https://groups.google.com/group/ptgui.
> To view this discussion on the web visit

> https://groups.google.com/d/msgid/ptgui/CAFWfbbvodpVLvAitquZyanYWA-Dd27HL31-YhTrh0hYZLos_dg%40mail.gmail.com
> <https://groups.google.com/d/msgid/ptgui/CAFWfbbvodpVLvAitquZyanYWA-Dd27HL31-YhTrh0hYZLos_dg%40mail.gmail.com?utm_medium=email&utm_source=footer>.