When using PTGui to run the command "-stitchnogui" for stitching, the resulting image appears rotated sideways and is not centered
56 views
Skip to first unread message
chenyuanrong
Jun 5, 2025, 2:43:53 AMJun 5
to PTGui Support
When using PTGui to run the command "-stitchnogui" for stitching, the resulting image appears rotated sideways and is not centered 
The desired output is:
What parameters do I need to add to run -stitchnogui?
PTGui Support
Jun 5, 2025, 7:52:14 AMJun 5
to pt...@googlegroups.com
Hi,
If you are shooting multiple panoras in the same way, with the same
number of images and the same overlap, you can create a template.
Provide this template with the -template flag together with -createproject.
For one-off panoramas there's no automatic solution. For single rows of
images, PTGui will assume it's a horizontal panorama. You can rotate
the panorama in the panorama editor and then press Fit Panorama.
Why it's not centered I don't know; I would need the images to find out.
Kind regards,
Joost Nieuwenhuijse
www.ptgui.com
On 6/5/25 08:43, 'chenyuanrong' via PTGui Support wrote:
> When using PTGui to run the command "-stitchnogui" for stitching, the
> resulting image appears rotated sideways and is not centered 企业微信截
> 图_17491053352257.png
> The desired output is:
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion visit https://groups.google.com/d/msgid/
> ptgui/153451bc-d5fd-4a98-ab71-c54ad6c11ad8n%40googlegroups.com <https://
> groups.google.com/d/msgid/ptgui/153451bc-d5fd-4a98-ab71-
> c54ad6c11ad8n%40googlegroups.com?utm_medium=email&utm_source=footer>.
If you are shooting multiple panoras in the same way, with the same
number of images and the same overlap, you can create a template.
Provide this template with the -template flag together with -createproject.
For one-off panoramas there's no automatic solution. For single rows of
images, PTGui will assume it's a horizontal panorama. You can rotate
the panorama in the panorama editor and then press Fit Panorama.
Why it's not centered I don't know; I would need the images to find out.
Kind regards,
Joost Nieuwenhuijse
www.ptgui.com
On 6/5/25 08:43, 'chenyuanrong' via PTGui Support wrote:
> When using PTGui to run the command "-stitchnogui" for stitching, the
> 图_17491053352257.png
> The desired output is:
> 企业微信截图_17491053715658.png
> What parameters do I need to add to run -stitchnogui?
>
>
> --
> What parameters do I need to add to run -stitchnogui?
>
>
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion visit https://groups.google.com/d/msgid/
> ptgui/153451bc-d5fd-4a98-ab71-c54ad6c11ad8n%40googlegroups.com <https://
> groups.google.com/d/msgid/ptgui/153451bc-d5fd-4a98-ab71-
> c54ad6c11ad8n%40googlegroups.com?utm_medium=email&utm_source=footer>.
chenyuanrong
Jun 5, 2025, 10:24:12 PMJun 5
to PTGui Support
This is a composite image material.
PTGui Support
Jun 6, 2025, 4:48:29 AMJun 6
to pt...@googlegroups.com
Hi,
In the Project Settings, you need to uncheck this box: "Straighten
Panorama". See attached screenshot.
Do this before running Align Images.
When stitching from the command line, you need to create a template as
follows:
- File - New Project
- Click Advanced
- Go to Project Settings and uncheck "Straighten Panorama"
- File - Save As Template
Then run PTGui from the command line as follows:
START "" /WAIT "C:\Program Files\PTGui\PTGui.exe" -createproject
img1.jpg img2.jpg [...] -output project.pts -template template.pts
-stitchnogui project.pts
(replace with your own files). This results in a vertical panorama.
There will still be empty space above or below, this cannot be removed
automatically, I'm sorry.
> > ptgui/153451bc-d5fd-4a98-ab71-c54ad6c11ad8n%40googlegroups.com
> <http://40googlegroups.com> <https://
> > groups.google.com/d/msgid/ptgui/153451bc-d5fd-4a98-ab71- <http://
> groups.google.com/d/msgid/ptgui/153451bc-d5fd-4a98-ab71->
> > c54ad6c11ad8n%40googlegroups.com?
> utm_medium=email&utm_source=footer <http://40googlegroups.com?
> utm_medium=email&utm_source=footer>>.
> groups.google.com/d/msgid/ptgui/b144842a-f9c7-4c09-
> bb7c-47614c8a4facn%40googlegroups.com?utm_medium=email&utm_source=footer>.
In the Project Settings, you need to uncheck this box: "Straighten
Panorama". See attached screenshot.
Do this before running Align Images.
When stitching from the command line, you need to create a template as
follows:
- File - New Project
- Click Advanced
- Go to Project Settings and uncheck "Straighten Panorama"
- File - Save As Template
Then run PTGui from the command line as follows:
START "" /WAIT "C:\Program Files\PTGui\PTGui.exe" -createproject
img1.jpg img2.jpg [...] -output project.pts -template template.pts
-stitchnogui project.pts
(replace with your own files). This results in a vertical panorama.
There will still be empty space above or below, this cannot be removed
automatically, I'm sorry.
On 6/6/25 04:24, 'chenyuanrong' via PTGui Support wrote:
> This is a composite image material.
> https://drive.google.com/drive/
> folders/1A0s8UDLfn4NXHTO9ez-05BXrM8wKKFlO?usp=sharing
> 在2025年6月5日星期四 UTC+8 19:52:14<PTGui Support> 写道：
>
> Hi,
>
> If you are shooting multiple panoras in the same way, with the same
> number of images and the same overlap, you can create a template.
> Provide this template with the -template flag together with -
> createproject.
>
> For one-off panoramas there's no automatic solution. For single rows of
> images, PTGui will assume it's a horizontal panorama. You can rotate
> the panorama in the panorama editor and then press Fit Panorama.
>
> Why it's not centered I don't know; I would need the images to find
> out.
>
> Kind regards,
>
> Joost Nieuwenhuijse
> www.ptgui.com <http://www.ptgui.com>
> This is a composite image material.
> https://drive.google.com/drive/
> folders/1A0s8UDLfn4NXHTO9ez-05BXrM8wKKFlO?usp=sharing
> 在2025年6月5日星期四 UTC+8 19:52:14<PTGui Support> 写道：
>
> Hi,
>
> If you are shooting multiple panoras in the same way, with the same
> number of images and the same overlap, you can create a template.
> Provide this template with the -template flag together with -
> createproject.
>
> For one-off panoramas there's no automatic solution. For single rows of
> images, PTGui will assume it's a horizontal panorama. You can rotate
> the panorama in the panorama editor and then press Fit Panorama.
>
> Why it's not centered I don't know; I would need the images to find
> out.
>
> Kind regards,
>
> Joost Nieuwenhuijse
>
> On 6/5/25 08:43, 'chenyuanrong' via PTGui Support wrote:
> > When using PTGui to run the command "-stitchnogui" for stitching,
> the
> > resulting image appears rotated sideways and is not centered 企业
> 微信截
> > 图_17491053352257.png
> > The desired output is:
> > 企业微信截图_17491053715658.png
> > What parameters do I need to add to run -stitchnogui?
> >
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to ptgui+un...@googlegroups.com
> > <mailto:ptgui+un...@googlegroups.com>.
> > To view this discussion visit https://groups.google.com/d/msgid/
> <https://groups.google.com/d/msgid/>
> On 6/5/25 08:43, 'chenyuanrong' via PTGui Support wrote:
> > When using PTGui to run the command "-stitchnogui" for stitching,
> the
> > resulting image appears rotated sideways and is not centered 企业
> 微信截
> > 图_17491053352257.png
> > The desired output is:
> > 企业微信截图_17491053715658.png
> > What parameters do I need to add to run -stitchnogui?
> >
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to ptgui+un...@googlegroups.com
> > <mailto:ptgui+un...@googlegroups.com>.
> > To view this discussion visit https://groups.google.com/d/msgid/
> > ptgui/153451bc-d5fd-4a98-ab71-c54ad6c11ad8n%40googlegroups.com
> <http://40googlegroups.com> <https://
> > groups.google.com/d/msgid/ptgui/153451bc-d5fd-4a98-ab71- <http://
> groups.google.com/d/msgid/ptgui/153451bc-d5fd-4a98-ab71->
> > c54ad6c11ad8n%40googlegroups.com?
> utm_medium=email&utm_source=footer <http://40googlegroups.com?
> utm_medium=email&utm_source=footer>>.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion visit https://groups.google.com/d/msgid/ptgui/
> b144842a-f9c7-4c09-bb7c-47614c8a4facn%40googlegroups.com <https://
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion visit https://groups.google.com/d/msgid/ptgui/
> groups.google.com/d/msgid/ptgui/b144842a-f9c7-4c09-
> bb7c-47614c8a4facn%40googlegroups.com?utm_medium=email&utm_source=footer>.
778428589
Jun 6, 2025, 5:09:04 AMJun 6
to ptgui
After using the template, the image is vertical. I found that as long as Panorama Centering and Panorama Fit are selected, the black space above can be removed. Is there a corresponding command for this in the non-interface version? If not, could you provide the calculation process for Panorama Centering and Panorama Fit?
------------------ 原始邮件 ------------------
发件人: "ptgui" <pt...@googlegroups.com>;
发送时间: 2025年6月6日(星期五) 下午4:48
收件人: "ptgui"<pt...@googlegroups.com>;
主题: Re: [PTGui] When using PTGui to run the command "-stitchnogui" for stitching, the resulting image appears rotated sideways and is not centered
You received this message because you are subscribed to a topic in the Google Groups "PTGui Support" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/ptgui/i_PYyG1Gq7o/unsubscribe.
To unsubscribe from this group and all its topics, send an email to ptgui+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/ptgui/a2b193f7-6941-4134-affe-04b98f702994%40ptgui.com.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/ptgui/i_PYyG1Gq7o/unsubscribe.
To unsubscribe from this group and all its topics, send an email to ptgui+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/ptgui/a2b193f7-6941-4134-affe-04b98f702994%40ptgui.com.
778428589
Jun 6, 2025, 5:44:55 AMJun 6
to ptgui
------------------ 原始邮件 ------------------
发件人: "ptgui" <pt...@googlegroups.com>;
发送时间: 2025年6月6日(星期五) 下午5:08
收件人: "ptgui"<pt...@googlegroups.com>;
主题: 回复： [PTGui] When using PTGui to run the command "-stitchnogui" for stitching, the resulting image appears rotated sideways and is not centered
To view this discussion visit https://groups.google.com/d/msgid/ptgui/tencent_BE93C93EF2EB927637DB939F612A82DFAD07%40qq.com.
PTGui Support
Jun 6, 2025, 6:04:47 AMJun 6
to pt...@googlegroups.com
I'm sorry, this cannot be done from the command line.
To center vertically, internally, PTGui iteratively applies a numerical
transform until the maximum and minimum pitch angle above and below the
horizon are the same but opposite.
For example: min=-50, max=20: PTGui applies a numerical transform of +15
degrees pitch. This is repeated a few times.
I'm afraid that implementing this yourself would not be trivial.
>
> 778428589
> 7784...@qq.com
>
> <https://wx.mail.qq.com/home/index?
> t=readmail_businesscard_midpage&nocheck=true&name=778428589&icon=https%3A%2F%2Fres.mail.qq.com%2Fzh_CN%2Fhtmledition%2Fimages%2Frss%2Fmale.gif%3Frand%3D1617349242&mail=778428589%40qq.com&code=>
>
>
> ------------------ 原始邮件 ------------------
> *发件人:* "ptgui" <pt...@googlegroups.com>;
> *发送时间:* 2025年6月6日(星期五) 下午4:48
> *收件人:* "ptgui"<pt...@googlegroups.com>;
> *主题:* Re: [PTGui] When using PTGui to run the command "-stitchnogui"
> groups.google.com/d/msgid/ptgui/
> tencent_BE93C93EF2EB927637DB939F612A82DFAD07%40qq.com?
> utm_medium=email&utm_source=footer>.
To center vertically, internally, PTGui iteratively applies a numerical
transform until the maximum and minimum pitch angle above and below the
horizon are the same but opposite.
For example: min=-50, max=20: PTGui applies a numerical transform of +15
degrees pitch. This is repeated a few times.
I'm afraid that implementing this yourself would not be trivial.
On 6/6/25 11:08, '778428589' via PTGui Support wrote:
>
> After using the template, the image is vertical. I found that as long as
> Panorama Centering and Panorama Fit are selected, the black space above
> can be removed. Is there a corresponding command for this in the non-
> interface version? If not, could you provide the calculation process for
> Panorama Centering and Panorama Fit?
> ------------------------------------------------------------------------
>
> After using the template, the image is vertical. I found that as long as
> Panorama Centering and Panorama Fit are selected, the black space above
> can be removed. Is there a corresponding command for this in the non-
> interface version? If not, could you provide the calculation process for
> Panorama Centering and Panorama Fit?
>
> 778428589
> 7784...@qq.com
>
> <https://wx.mail.qq.com/home/index?
> t=readmail_businesscard_midpage&nocheck=true&name=778428589&icon=https%3A%2F%2Fres.mail.qq.com%2Fzh_CN%2Fhtmledition%2Fimages%2Frss%2Fmale.gif%3Frand%3D1617349242&mail=778428589%40qq.com&code=>
>
>
> ------------------ 原始邮件 ------------------
> *发件人:* "ptgui" <pt...@googlegroups.com>;
> *发送时间:* 2025年6月6日(星期五) 下午4:48
> *收件人:* "ptgui"<pt...@googlegroups.com>;
> *主题:* Re: [PTGui] When using PTGui to run the command "-stitchnogui"
> You received this message because you are subscribed to a topic in the
> Google Groups "PTGui Support" group.
> To unsubscribe from this topic, visit https://groups.google.com/d/topic/
> ptgui/i_PYyG1Gq7o/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> ptgui+un...@googlegroups.com.
> To view this discussion visit https://groups.google.com/d/msgid/ptgui/
> a2b193f7-6941-4134-affe-04b98f702994%40ptgui.com.
>
> Google Groups "PTGui Support" group.
> To unsubscribe from this topic, visit https://groups.google.com/d/topic/
> ptgui/i_PYyG1Gq7o/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> ptgui+un...@googlegroups.com.
> To view this discussion visit https://groups.google.com/d/msgid/ptgui/
> a2b193f7-6941-4134-affe-04b98f702994%40ptgui.com.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion visit https://groups.google.com/d/msgid/ptgui/
> tencent_BE93C93EF2EB927637DB939F612A82DFAD07%40qq.com <https://
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion visit https://groups.google.com/d/msgid/ptgui/
> groups.google.com/d/msgid/ptgui/
> tencent_BE93C93EF2EB927637DB939F612A82DFAD07%40qq.com?
> utm_medium=email&utm_source=footer>.
Reply all
Reply to author
Forward
0 new messages