Tikee 3 batch stinching

[Janne Halonen]

Hello! I have tikee 3 timelapse camera that takes series of pictures with dual lens (220 FOV). I would like to batch stitch images to 7360x2650 panoramas and then create timelapse video with lrtimelapse. I havent yet found settings that would create working panoramas with ptgui. I found old threads but those settings and instructions didn't work. Is here someone using same camera and workflow and would be able to help me with settings?

Janne

[Erik Krause]

Am 09.04.2023 um 18:44 schrieb Janne Halonen:

> Hello! I have tikee 3 timelapse camera that takes series of pictures with
> dual lens (220 FOV).

The lenses of this camera are far too far apart. Parallax problems will
be inevitable. Obviously, the constructors of this camera didn't know
much about panorama stitching...

> I havent yet found settings that would create working panoramas with
> ptgui.

What exactly is your problem? What is your PTGui version?

Also see this thread:
https://groups.google.com/g/ptgui/c/gu2uCbrfB5g

--
Erik Krause
http://www.erik-krause.de

[Janne Halonen]

I am using ptgui pro 12.21. Here is link where you can see the problem, I havent been able to batch stitch these photos without massive stitching error. Those errors dont come up if I use tikee's timelapse builder.

https://jhdrone.kuvat.fi/kuvat/sekalaiset/timelapse_h264-420_Rec.709L_1080p_29.97_HQ.mp4

[PTGui Support]

Hi Janne,

I've tried to create a template using your imagas, see attached. You can
try using this in the batch builder.

The Tikee has a big design flaw in the way the lenses are arranged. They
should be positioned as close as possible in order to minimize parallax.
This will lead to inevitable stitching errors.

In the template I've switched Optimum Seam finding off. This ensures
that the seams will be placed identically in each frame (in your video
you can see the seams moving around while the video is playing).

Kind regards,

Joost Nieuwenhuijse
www.ptgui.com

> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/01b8eb4a-44e4-4fc0-8e79-56d94bcea663n%40googlegroups.com <https://groups.google.com/d/msgid/ptgui/01b8eb4a-44e4-4fc0-8e79-56d94bcea663n%40googlegroups.com?utm_medium=email&utm_source=footer>.