Inquiry About Command Line Functionality in PTGui Pro
108 views
Skip to first unread message
Mobeen Ikhtiar
Jul 4, 2024, 12:43:38 AMJul 4
to PTGui Support
when I run this command to execute the pts file ./PTGui -batch outmob.pts
but the problem is that few images do not have control points. So is there any command to ignore the unconnected control points? and generate the panoramas.
but the problem is that few images do not have control points. So is there any command to ignore the unconnected control points? and generate the panoramas.
PTGui Support
Jul 4, 2024, 4:48:08 AMJul 4
to pt...@googlegroups.com
Hi Mobeen,
Are all your panoramas taken with approximately the same image
positions? In that case you can create a template:
Just stitch one of your panoramas manually in PTGui. When the result
looks good, go to Project Settings and under Batch Stitcher Actions,
enable these 2 checkboxes:
x Do Align Images and save the modified project
x Create the Panorama
and uncheck this box:
but only if enough control points found.
Then do File - Save Project As and save it somewhere.
Then, when you run -createproject, add a -template option to specify the
template you just created. PTGui will attempt to align the images with
control points. If this fails, it will fall back to the orientations
specified in the template.
Kind regards,
Joost Nieuwenhuijse
www.ptgui.com
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/400724cb-42da-43bf-9135-87fca5b9da98n%40googlegroups.com <https://groups.google.com/d/msgid/ptgui/400724cb-42da-43bf-9135-87fca5b9da98n%40googlegroups.com?utm_medium=email&utm_source=footer>.
Are all your panoramas taken with approximately the same image
positions? In that case you can create a template:
Just stitch one of your panoramas manually in PTGui. When the result
looks good, go to Project Settings and under Batch Stitcher Actions,
enable these 2 checkboxes:
x Do Align Images and save the modified project
x Create the Panorama
and uncheck this box:
but only if enough control points found.
Then do File - Save Project As and save it somewhere.
Then, when you run -createproject, add a -template option to specify the
template you just created. PTGui will attempt to align the images with
control points. If this fails, it will fall back to the orientations
specified in the template.
Kind regards,
Joost Nieuwenhuijse
www.ptgui.com
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/400724cb-42da-43bf-9135-87fca5b9da98n%40googlegroups.com <https://groups.google.com/d/msgid/ptgui/400724cb-42da-43bf-9135-87fca5b9da98n%40googlegroups.com?utm_medium=email&utm_source=footer>.
Mobeen Ikhtiar
Jul 10, 2024, 2:23:41 AM (13 days ago) Jul 10
to pt...@googlegroups.com
Hi
I am getting black patches in my panorama so is there way that we can configure it to auto crop or ignore these black patches?
To unsubscribe from this group and stop receiving emails from it, send an email to ptgui+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ptgui/9889566c-cd38-44bd-b049-dddcc8afec9e%40ptgui.com.
John Houghton
Jul 10, 2024, 3:34:48 AM (13 days ago) Jul 10
to PTGui Support
On Wednesday, July 10, 2024 at 7:23:41 AM UTC+1 Mobeen Ikhtiar wrote:
HiI am getting black patches in my panorama so is there way that we can configure it to auto crop or ignore these black patches?
Mobeen, Are the blank patches due to images being out of position owing to a lack of control points? Are you shooting the panoramas in regular patterns using a panorama head (e.g. 2 rows of 6 images) or irregular with a handheld camera perhaps? If you are being consistent in the way the panoramas are shot, using templates (as Joost suggested) ought to avoid blank areas occurring.
John
Mobeen Ikhtiar
Jul 10, 2024, 6:00:36 AM (13 days ago) Jul 10
to pt...@googlegroups.com
I am using 3 rows 10 images. so where ptgui feels that there are no control points it add black patches. I want to ignore that image instead of black patch. Is it possible?
--
You received this message because you are subscribed to the Google Groups "PTGui Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ptgui+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ptgui/483237f3-6192-4645-86ea-01b363b38b55n%40googlegroups.com.
John Houghton
Jul 10, 2024, 6:31:21 AM (13 days ago) Jul 10
to PTGui Support
On Wednesday, July 10, 2024 at 11:00:36 AM UTC+1 Mobeen Ikhtiar wrote:
I am using 3 rows 10 images. so where ptgui feels that there are no control points it add black patches. I want to ignore that image instead of black patch. Is it possible?
Mobeen, PTGui doesn't add the black patch. The black area is there by default and is simply not being hidden by a properly positioned image. This typically happens with large areas of blue sky, when no features for control points can be found. Have you tried creating a template as described by Joost? That will initialise the positions of all the images in their correct places before creating control points. Any images without points should remain in position after optimization and so not leave a black hole.
John
John Houghton
Jul 10, 2024, 6:54:06 AM (13 days ago) Jul 10
to PTGui Support
Mobeen, Just a thought: when you create your template project: on the Project Settings tab in the Align Images section, check the option "Images are already roughly positioned" before saving the template. You could check your template by starting a new project, load in a new set of images and then go to File->Apply template and check all looks well in the Panorama Editor window, with no holes.
John
PTGui Support
Jul 11, 2024, 2:35:33 AM (12 days ago) Jul 11
to pt...@googlegroups.com
Hi Mobeen,
Any areas not covered by source images will be left transparent by
PTGui. But the jpeg format doesn't support transparency (there's no
alpha channel), so all transparent areas will be rendered black.
The TIFF format does support transparency, so you may use this instead.
As John said, you might want to use a template where the images are
roughly pre-positioned. Then they will be in place even if there are no
control points.
Any areas not covered by source images will be left transparent by
PTGui. But the jpeg format doesn't support transparency (there's no
alpha channel), so all transparent areas will be rendered black.
The TIFF format does support transparency, so you may use this instead.
As John said, you might want to use a template where the images are
roughly pre-positioned. Then they will be in place even if there are no
control points.
On 10-07-2024 12:00, Mobeen Ikhtiar wrote:
> I am using 3 rows 10 images. so where ptgui feels that there are no
> control points it add black patches. I want to ignore that image instead
> of black patch. Is it possible?
>
> On Wed, 10 Jul 2024 at 12:34, John Houghton <houghto...@gmail.com
> <mailto:houghto...@gmail.com>> wrote:
>
> On Wednesday, July 10, 2024 at 7:23:41 AM UTC+1 Mobeen Ikhtiar wrote:
>
> Hi
> I am getting black patches in my panorama so is there way that
> we can configure it to auto crop or ignore these black patches?
>
>
> Mobeen, Are the blank patches due to images being out of position
> owing to a lack of control points? Are you shooting the panoramas
> in regular patterns using a panorama head (e.g. 2 rows of 6 images)
> or irregular with a handheld camera perhaps? If you are being
> consistent in the way the panoramas are shot, using templates (as
> Joost suggested) ought to avoid blank areas occurring.
>
> John
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> I am using 3 rows 10 images. so where ptgui feels that there are no
> control points it add black patches. I want to ignore that image instead
> of black patch. Is it possible?
>
> On Wed, 10 Jul 2024 at 12:34, John Houghton <houghto...@gmail.com
> <mailto:houghto...@gmail.com>> wrote:
>
> On Wednesday, July 10, 2024 at 7:23:41 AM UTC+1 Mobeen Ikhtiar wrote:
>
> Hi
> I am getting black patches in my panorama so is there way that
> we can configure it to auto crop or ignore these black patches?
>
>
> Mobeen, Are the blank patches due to images being out of position
> owing to a lack of control points? Are you shooting the panoramas
> in regular patterns using a panorama head (e.g. 2 rows of 6 images)
> or irregular with a handheld camera perhaps? If you are being
> consistent in the way the panoramas are shot, using templates (as
> Joost suggested) ought to avoid blank areas occurring.
>
> John
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to ptgui+un...@googlegroups.com
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/483237f3-6192-4645-86ea-01b363b38b55n%40googlegroups.com <https://groups.google.com/d/msgid/ptgui/483237f3-6192-4645-86ea-01b363b38b55n%40googlegroups.com?utm_medium=email&utm_source=footer>.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/CAH05-omqHsoq19dUEYR-OjkD5MRxDaJ%2Bou0Cw3g96i_iC8bAiA%40mail.gmail.com <https://groups.google.com/d/msgid/ptgui/CAH05-omqHsoq19dUEYR-OjkD5MRxDaJ%2Bou0Cw3g96i_iC8bAiA%40mail.gmail.com?utm_medium=email&utm_source=footer>.
Mobeen Ikhtiar
Jul 11, 2024, 6:08:46 AM (12 days ago) Jul 11
to pt...@googlegroups.com
If you have any pre made template you can send me and I can try it?
To unsubscribe from this group and stop receiving emails from it, send an email to ptgui+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ptgui/4275134c-9ea7-47e0-b9bd-57b94c5dc482%40ptgui.com.
PTGui Support
Jul 11, 2024, 7:08:39 AM (12 days ago) Jul 11
to pt...@googlegroups.com
The template should be made for the specific layout of your images.
It's very easy though: load your 30 images into PTGui and press Align
Images.
If there are any missing control points, add some by hand and run the
optimizer.
When the result looks good, go to Project Settings. Under 'Batch
Stitcher Actions', enable this checkbox:
'Do Align Images and save the modified project'
Then do File - Save As Template.
The template can be used in the Batch Builder.
If you are stitching from the command line, in PTGui Pro 13 beta you can do:
ptgui -createproject <templatename.pts> -template <image1.jpg>
<image2.jpg> ... -output <panorama.pts>
> > <mailto:ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>>.
> > <mailto:ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>>.
It's very easy though: load your 30 images into PTGui and press Align
Images.
If there are any missing control points, add some by hand and run the
optimizer.
When the result looks good, go to Project Settings. Under 'Batch
Stitcher Actions', enable this checkbox:
'Do Align Images and save the modified project'
Then do File - Save As Template.
The template can be used in the Batch Builder.
If you are stitching from the command line, in PTGui Pro 13 beta you can do:
ptgui -createproject <templatename.pts> -template <image1.jpg>
<image2.jpg> ... -output <panorama.pts>
On 11-07-2024 12:08, Mobeen Ikhtiar wrote:
> If you have any pre made template you can send me and I can try it?
>
> On Thu, 11 Jul 2024 at 11:35, 'PTGui Support' via PTGui Support
> <pt...@googlegroups.com <mailto:pt...@googlegroups.com>> wrote:
>
> Hi Mobeen,
>
> Any areas not covered by source images will be left transparent by
> PTGui. But the jpeg format doesn't support transparency (there's no
> alpha channel), so all transparent areas will be rendered black.
>
> The TIFF format does support transparency, so you may use this instead.
>
> As John said, you might want to use a template where the images are
> roughly pre-positioned. Then they will be in place even if there are no
> control points.
>
> Kind regards,
>
> Joost Nieuwenhuijse
> www.ptgui.com <http://www.ptgui.com>
> If you have any pre made template you can send me and I can try it?
>
> On Thu, 11 Jul 2024 at 11:35, 'PTGui Support' via PTGui Support
> <pt...@googlegroups.com <mailto:pt...@googlegroups.com>> wrote:
>
> Hi Mobeen,
>
> Any areas not covered by source images will be left transparent by
> PTGui. But the jpeg format doesn't support transparency (there's no
> alpha channel), so all transparent areas will be rendered black.
>
> The TIFF format does support transparency, so you may use this instead.
>
> As John said, you might want to use a template where the images are
> roughly pre-positioned. Then they will be in place even if there are no
> control points.
>
> Kind regards,
>
> Joost Nieuwenhuijse
>
> On 10-07-2024 12:00, Mobeen Ikhtiar wrote:
> > I am using 3 rows 10 images. so where ptgui feels that there are no
> > control points it add black patches. I want to ignore that image
> instead
> > of black patch. Is it possible?
> >
> > On Wed, 10 Jul 2024 at 12:34, John Houghton
> <houghto...@gmail.com <mailto:houghto...@gmail.com>
> > <mailto:houghto...@gmail.com
> On 10-07-2024 12:00, Mobeen Ikhtiar wrote:
> > I am using 3 rows 10 images. so where ptgui feels that there are no
> > control points it add black patches. I want to ignore that image
> instead
> > of black patch. Is it possible?
> >
> > On Wed, 10 Jul 2024 at 12:34, John Houghton
> <houghto...@gmail.com <mailto:houghto...@gmail.com>
> <mailto:houghto...@gmail.com>>> wrote:
> >
> > On Wednesday, July 10, 2024 at 7:23:41 AM UTC+1 Mobeen
> Ikhtiar wrote:
> >
> > Hi
> > I am getting black patches in my panorama so is there way
> that
> > we can configure it to auto crop or ignore these black
> patches?
> >
> >
> > Mobeen, Are the blank patches due to images being out of
> position
> > owing to a lack of control points? Are you shooting the
> panoramas
> > in regular patterns using a panorama head (e.g. 2 rows of 6
> images)
> > or irregular with a handheld camera perhaps? If you are being
> > consistent in the way the panoramas are shot, using templates (as
> > Joost suggested) ought to avoid blank areas occurring.
> >
> > John
> >
> > --
> > You received this message because you are subscribed to the
> Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> > send an email to ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>
> >
> > On Wednesday, July 10, 2024 at 7:23:41 AM UTC+1 Mobeen
> Ikhtiar wrote:
> >
> > Hi
> > I am getting black patches in my panorama so is there way
> that
> > we can configure it to auto crop or ignore these black
> patches?
> >
> >
> > Mobeen, Are the blank patches due to images being out of
> position
> > owing to a lack of control points? Are you shooting the
> panoramas
> > in regular patterns using a panorama head (e.g. 2 rows of 6
> images)
> > or irregular with a handheld camera perhaps? If you are being
> > consistent in the way the panoramas are shot, using templates (as
> > Joost suggested) ought to avoid blank areas occurring.
> >
> > John
> >
> > --
> > You received this message because you are subscribed to the
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> > send an email to ptgui+un...@googlegroups.com
> > <mailto:ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>>.
> > To view this discussion on the web visit
> >
> https://groups.google.com/d/msgid/ptgui/483237f3-6192-4645-86ea-01b363b38b55n%40googlegroups.com <https://groups.google.com/d/msgid/ptgui/483237f3-6192-4645-86ea-01b363b38b55n%40googlegroups.com> <https://groups.google.com/d/msgid/ptgui/483237f3-6192-4645-86ea-01b363b38b55n%40googlegroups.com?utm_medium=email&utm_source=footer <https://groups.google.com/d/msgid/ptgui/483237f3-6192-4645-86ea-01b363b38b55n%40googlegroups.com?utm_medium=email&utm_source=footer>>.
> >
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>
> > --
> > You received this message because you are subscribed to the Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to ptgui+un...@googlegroups.com
> > <mailto:ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>>.
> > To view this discussion on the web visit
> >
> https://groups.google.com/d/msgid/ptgui/CAH05-omqHsoq19dUEYR-OjkD5MRxDaJ%2Bou0Cw3g96i_iC8bAiA%40mail.gmail.com <https://groups.google.com/d/msgid/ptgui/CAH05-omqHsoq19dUEYR-OjkD5MRxDaJ%2Bou0Cw3g96i_iC8bAiA%40mail.gmail.com> <https://groups.google.com/d/msgid/ptgui/CAH05-omqHsoq19dUEYR-OjkD5MRxDaJ%2Bou0Cw3g96i_iC8bAiA%40mail.gmail.com?utm_medium=email&utm_source=footer <https://groups.google.com/d/msgid/ptgui/CAH05-omqHsoq19dUEYR-OjkD5MRxDaJ%2Bou0Cw3g96i_iC8bAiA%40mail.gmail.com?utm_medium=email&utm_source=footer>>.
> >
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>.
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to ptgui+un...@googlegroups.com
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/4275134c-9ea7-47e0-b9bd-57b94c5dc482%40ptgui.com <https://groups.google.com/d/msgid/ptgui/4275134c-9ea7-47e0-b9bd-57b94c5dc482%40ptgui.com>.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/CAH05-okJF67A%2BiGgdA22%2BpRPnOhM%3DMUetcQY8R1NrQkvtG5kOw%40mail.gmail.com <https://groups.google.com/d/msgid/ptgui/CAH05-okJF67A%2BiGgdA22%2BpRPnOhM%3DMUetcQY8R1NrQkvtG5kOw%40mail.gmail.com?utm_medium=email&utm_source=footer>.
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
John Houghton
Jul 11, 2024, 10:21:31 AM (11 days ago) Jul 11
to PTGui Support
On Thursday, July 11, 2024 at 11:08:46 AM UTC+1 Mobeen Ikhtiar wrote:
If you have any pre made template you can send me and I can try it?
Mobeen, If you can do File->Save project in PTGui for one of your 2 rows by 10 projects and supply a copy of this .pts file here, I will produce a template project for you. It doesn't matter if there are a few black holes in the panorama (but not a whole row of them!).
John
Mobeen Ikhtiar
Jul 12, 2024, 3:11:40 AM (11 days ago) Jul 12
to pt...@googlegroups.com
Hi, I am creating panoramas using PTGui 13 beta version through the command line. Is there a way to define control points via the command line instead of doing it manually?
--
You received this message because you are subscribed to the Google Groups "PTGui Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ptgui+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ptgui/d6d27427-c7ad-4ee0-bcfc-7e1c4e176667n%40googlegroups.com.
PTGui Support
Jul 12, 2024, 4:10:30 AM (11 days ago) Jul 12
to pt...@googlegroups.com
Hi Mobeen,
You cannot add individual control points using the command line, I'm sorry.
What you can do is tell PTGui to generate control points. In your
project, under Batch Stitcher Actions, enable 'Do Align Images'.
Then when the project is processed using '-stitchnogui', PTGui Pro will
first generate control points.
You cannot add individual control points using the command line, I'm sorry.
What you can do is tell PTGui to generate control points. In your
project, under Batch Stitcher Actions, enable 'Do Align Images'.
Then when the project is processed using '-stitchnogui', PTGui Pro will
first generate control points.
On 12-07-2024 09:11, Mobeen Ikhtiar wrote:
> Hi, I am creating panoramas using PTGui 13 beta version through the
> command line. Is there a way to define control points via the command
> line instead of doing it manually?
>
> On Thu, 11 Jul 2024 at 19:21, John Houghton <houghto...@gmail.com
> <mailto:houghto...@gmail.com>> wrote:
>
> On Thursday, July 11, 2024 at 11:08:46 AM UTC+1 Mobeen Ikhtiar wrote:
>
> If you have any pre made template you can send me and I can try it?
>
>
> Mobeen, If you can do *File->Save project* in PTGui for one of
> Hi, I am creating panoramas using PTGui 13 beta version through the
> command line. Is there a way to define control points via the command
> line instead of doing it manually?
>
> On Thu, 11 Jul 2024 at 19:21, John Houghton <houghto...@gmail.com
> <mailto:houghto...@gmail.com>> wrote:
>
> On Thursday, July 11, 2024 at 11:08:46 AM UTC+1 Mobeen Ikhtiar wrote:
>
> If you have any pre made template you can send me and I can try it?
>
>
> your 2 rows by 10 projects and supply a copy of this .pts file here,
> I will produce a template project for you. It doesn't matter if
> there are a few black holes in the panorama (but not a whole row of
> them!).
>
> John
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> I will produce a template project for you. It doesn't matter if
> there are a few black holes in the panorama (but not a whole row of
> them!).
>
> John
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to ptgui+un...@googlegroups.com
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/d6d27427-c7ad-4ee0-bcfc-7e1c4e176667n%40googlegroups.com <https://groups.google.com/d/msgid/ptgui/d6d27427-c7ad-4ee0-bcfc-7e1c4e176667n%40googlegroups.com?utm_medium=email&utm_source=footer>.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/CAH05-ongd6Z%2BO4TRkf_inKjOLn2M1C0YQpCHEf03%3D1vvSMCpzA%40mail.gmail.com <https://groups.google.com/d/msgid/ptgui/CAH05-ongd6Z%2BO4TRkf_inKjOLn2M1C0YQpCHEf03%3D1vvSMCpzA%40mail.gmail.com?utm_medium=email&utm_source=footer>.
Mobeen Ikhtiar
Jul 12, 2024, 9:33:20 AM (10 days ago) Jul 12
to pt...@googlegroups.com
In this step if PTGui is unable to generate control points for some images then what will be behaviour?
To unsubscribe from this group and stop receiving emails from it, send an email to ptgui+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ptgui/9c7424bf-d5a8-41a0-adb0-297cae57b329%40ptgui.com.
PTGui Support
Jul 13, 2024, 3:38:16 AM (10 days ago) Jul 13
to pt...@googlegroups.com
For images without control points, PTGui will attempt to keep them
roughly in the position as specified by the template.
> > <mailto:ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>>.
> > <mailto:ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>>.
roughly in the position as specified by the template.
On 12-07-2024 15:33, Mobeen Ikhtiar wrote:
> In this step if PTGui is unable to generate control points for some
> images then what will be behaviour?
>
> On Fri, 12 Jul 2024 at 13:10, 'PTGui Support' via PTGui Support
> <pt...@googlegroups.com <mailto:pt...@googlegroups.com>> wrote:
>
> Hi Mobeen,
>
> You cannot add individual control points using the command line, I'm
> sorry.
>
> What you can do is tell PTGui to generate control points. In your
> project, under Batch Stitcher Actions, enable 'Do Align Images'.
>
> Then when the project is processed using '-stitchnogui', PTGui Pro will
> first generate control points.
>
> Kind regards,
>
> Joost Nieuwenhuijse
> www.ptgui.com <http://www.ptgui.com>
> In this step if PTGui is unable to generate control points for some
> images then what will be behaviour?
>
> On Fri, 12 Jul 2024 at 13:10, 'PTGui Support' via PTGui Support
> <pt...@googlegroups.com <mailto:pt...@googlegroups.com>> wrote:
>
> Hi Mobeen,
>
> You cannot add individual control points using the command line, I'm
> sorry.
>
> What you can do is tell PTGui to generate control points. In your
> project, under Batch Stitcher Actions, enable 'Do Align Images'.
>
> Then when the project is processed using '-stitchnogui', PTGui Pro will
> first generate control points.
>
> Kind regards,
>
> Joost Nieuwenhuijse
>
> On 12-07-2024 09:11, Mobeen Ikhtiar wrote:
> > Hi, I am creating panoramas using PTGui 13 beta version through the
> > command line. Is there a way to define control points via the
> command
> > line instead of doing it manually?
> >
> > On Thu, 11 Jul 2024 at 19:21, John Houghton
> <houghto...@gmail.com <mailto:houghto...@gmail.com>
> > <mailto:houghto...@gmail.com
> On 12-07-2024 09:11, Mobeen Ikhtiar wrote:
> > Hi, I am creating panoramas using PTGui 13 beta version through the
> > command line. Is there a way to define control points via the
> command
> > line instead of doing it manually?
> >
> > On Thu, 11 Jul 2024 at 19:21, John Houghton
> <houghto...@gmail.com <mailto:houghto...@gmail.com>
> <mailto:houghto...@gmail.com>>> wrote:
> >
> > On Thursday, July 11, 2024 at 11:08:46 AM UTC+1 Mobeen
> Ikhtiar wrote:
> >
> > If you have any pre made template you can send me and I
> can try it?
> >
> >
> > Mobeen, If you can do *File->Save project* in PTGui for one of
> > your 2 rows by 10 projects and supply a copy of this .pts
> file here,
> > I will produce a template project for you. It doesn't matter if
> > there are a few black holes in the panorama (but not a whole
> row of
> > them!).
> >
> > John
> >
> > --
> > You received this message because you are subscribed to the
> Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> > send an email to ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>
> >
> > On Thursday, July 11, 2024 at 11:08:46 AM UTC+1 Mobeen
> Ikhtiar wrote:
> >
> > If you have any pre made template you can send me and I
> can try it?
> >
> >
> > Mobeen, If you can do *File->Save project* in PTGui for one of
> > your 2 rows by 10 projects and supply a copy of this .pts
> file here,
> > I will produce a template project for you. It doesn't matter if
> > there are a few black holes in the panorama (but not a whole
> row of
> > them!).
> >
> > John
> >
> > --
> > You received this message because you are subscribed to the
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> > send an email to ptgui+un...@googlegroups.com
> > <mailto:ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>>.
> > To view this discussion on the web visit
> >
> https://groups.google.com/d/msgid/ptgui/d6d27427-c7ad-4ee0-bcfc-7e1c4e176667n%40googlegroups.com <https://groups.google.com/d/msgid/ptgui/d6d27427-c7ad-4ee0-bcfc-7e1c4e176667n%40googlegroups.com> <https://groups.google.com/d/msgid/ptgui/d6d27427-c7ad-4ee0-bcfc-7e1c4e176667n%40googlegroups.com?utm_medium=email&utm_source=footer <https://groups.google.com/d/msgid/ptgui/d6d27427-c7ad-4ee0-bcfc-7e1c4e176667n%40googlegroups.com?utm_medium=email&utm_source=footer>>.
> >
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>
> > --
> > You received this message because you are subscribed to the Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to ptgui+un...@googlegroups.com
> > <mailto:ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>>.
> > To view this discussion on the web visit
> >
> https://groups.google.com/d/msgid/ptgui/CAH05-ongd6Z%2BO4TRkf_inKjOLn2M1C0YQpCHEf03%3D1vvSMCpzA%40mail.gmail.com <https://groups.google.com/d/msgid/ptgui/CAH05-ongd6Z%2BO4TRkf_inKjOLn2M1C0YQpCHEf03%3D1vvSMCpzA%40mail.gmail.com> <https://groups.google.com/d/msgid/ptgui/CAH05-ongd6Z%2BO4TRkf_inKjOLn2M1C0YQpCHEf03%3D1vvSMCpzA%40mail.gmail.com?utm_medium=email&utm_source=footer <https://groups.google.com/d/msgid/ptgui/CAH05-ongd6Z%2BO4TRkf_inKjOLn2M1C0YQpCHEf03%3D1vvSMCpzA%40mail.gmail.com?utm_medium=email&utm_source=footer>>.
> >
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>.
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to ptgui+un...@googlegroups.com
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/9c7424bf-d5a8-41a0-adb0-297cae57b329%40ptgui.com <https://groups.google.com/d/msgid/ptgui/9c7424bf-d5a8-41a0-adb0-297cae57b329%40ptgui.com>.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/CAH05-on6LuLS_Rv5O2Psb0q_db5yypOTi4VVXRQNBcdMhdunJg%40mail.gmail.com <https://groups.google.com/d/msgid/ptgui/CAH05-on6LuLS_Rv5O2Psb0q_db5yypOTi4VVXRQNBcdMhdunJg%40mail.gmail.com?utm_medium=email&utm_source=footer>.
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
Reply all
Reply to author
Forward
0 new messages