Groups keyboard shortcuts have been updated
Dismiss
See shortcuts
PTGui 13 - relative path not working [Bug]
168 views
Skip to first unread message
Conrad Allan
May 13, 2024, 9:29:08 PM5/13/24
to PTGui Support
Hey,
The below settings work for relative pathing work for Ptgui 12, but not for Ptgui 13 beta 6.
No matter what I enter for the project file location, it always ends up next to the source image folder. I have validated that there are enough parent folders also.
Any assistance here would be greatly appreciated.
PTGui Support
May 14, 2024, 5:57:03 AM5/14/24
to pt...@googlegroups.com
Hi Conrad,
This will be fixed, thanks!
Kind regards,
Joost Nieuwenhuijse
www.ptgui.com
On 14-05-2024 03:29, Conrad Allan wrote:
> Hey,
>
> The below settings work for relative pathing work for Ptgui 12, but not
> for Ptgui 13 beta 6.
>
> CleanShot 2024-05-14 at 11.2...@2x.png
> or for the consequences of any actions taken on the basis of the
> information provided, unless that information is subsequently confirmed
> in writing.
> Any views or opinions presented in this email are solely those of the
> author and do not necessarily represent those of the company.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/37043505-bce7-49b7-9a89-440bbd695662n%40googlegroups.com <https://groups.google.com/d/msgid/ptgui/37043505-bce7-49b7-9a89-440bbd695662n%40googlegroups.com?utm_medium=email&utm_source=footer>.
This will be fixed, thanks!
Kind regards,
Joost Nieuwenhuijse
www.ptgui.com
On 14-05-2024 03:29, Conrad Allan wrote:
> Hey,
>
> The below settings work for relative pathing work for Ptgui 12, but not
> for Ptgui 13 beta 6.
>
>
> No matter what I enter for the project file location, it always ends up
> next to the source image folder. I have validated that there are enough
> parent folders also.
>
>
> Any assistance here would be greatly appreciated.
>
>
>
> Matte Paint Pty LTD accepts no liability for the content of this email,
> No matter what I enter for the project file location, it always ends up
> next to the source image folder. I have validated that there are enough
> parent folders also.
>
>
> Any assistance here would be greatly appreciated.
>
>
>
> or for the consequences of any actions taken on the basis of the
> information provided, unless that information is subsequently confirmed
> in writing.
> Any views or opinions presented in this email are solely those of the
> author and do not necessarily represent those of the company.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/37043505-bce7-49b7-9a89-440bbd695662n%40googlegroups.com <https://groups.google.com/d/msgid/ptgui/37043505-bce7-49b7-9a89-440bbd695662n%40googlegroups.com?utm_medium=email&utm_source=footer>.
Conrad Allan
May 14, 2024, 8:27:03 PM5/14/24
to pt...@googlegroups.com
Excellent, thanks Joost!
On Tue, May 14, 2024 at 19:57:04, PTGui Support <sup...@ptgui.com> wrote:
Hi Conrad,
This will be fixed, thanks!
Kind regards,
Joost Nieuwenhuijse
www.ptgui.comOn 14-05-2024 03:29, Conrad Allan wrote:
Hey,
The below settings work for relative pathing work for Ptgui 12, but not for Ptgui 13 beta 6.
CleanShot 2024-05-14 at 11.2...@2x.png
No matter what I enter for the project file location, it always ends up next to the source image folder. I have validated that there are enough parent folders also.
Any assistance here would be greatly appreciated.
Matte Paint Pty LTD accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing.
Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company.
--
You received this message because you are subscribed to the Google Groups "PTGui Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ptgui+unsubscribe@googlegroups.com
<mailto:ptgui+unsubscribe@googlegroups.com>. To view this discussion on the web visit
--
You received this message because you are subscribed to a topic in the Google Groups "PTGui Support" group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/ptgui/QCKzgSx9HxI/unsubscribe. To unsubscribe from this group and all its topics, send an email to ptgui+unsubscribe@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptgui/437a1a06-ab25-4b2e-9b4b-88428b7b40ad%40ptgui.com.
PTGui Support
May 17, 2024, 4:59:56 AM5/17/24
to pt...@googlegroups.com
Hi Conrad,
I couldn't find any differences between v12 and v13 regarding this.
It works for me when I put this in a template and use the batch builder.
The folder ..\..\..\projects is created and the new project is saved there.
It doesn't work when doing File - Save. The 'Save As' dialog pops up; it
will navigate to the configured folder if it exists, but it will not
create the folder. This might be good to add, but the current behavior
is consistent with PTGui 12.
Is this also what you are seeing?
> <mailto:ptgui+un...@googlegroups.com>.
I couldn't find any differences between v12 and v13 regarding this.
It works for me when I put this in a template and use the batch builder.
The folder ..\..\..\projects is created and the new project is saved there.
It doesn't work when doing File - Save. The 'Save As' dialog pops up; it
will navigate to the configured folder if it exists, but it will not
create the folder. This might be good to add, but the current behavior
is consistent with PTGui 12.
Is this also what you are seeing?
> Hey,
>
> The below settings work for relative pathing work for Ptgui 12, but not
> for Ptgui 13 beta 6.
>
> CleanShot 2024-05-14 at 11.2...@2x.png
>
> The below settings work for relative pathing work for Ptgui 12, but not
> for Ptgui 13 beta 6.
>
>
> No matter what I enter for the project file location, it always ends up
> next to the source image folder. I have validated that there are enough
> parent folders also.
>
>
> Any assistance here would be greatly appreciated.
>
>
>
> No matter what I enter for the project file location, it always ends up
> next to the source image folder. I have validated that there are enough
> parent folders also.
>
>
> Any assistance here would be greatly appreciated.
>
>
>
> Matte Paint Pty LTD accepts no liability for the content of this email,
> or for the consequences of any actions taken on the basis of the
> information provided, unless that information is subsequently confirmed
> in writing.
> Any views or opinions presented in this email are solely those of the
> author and do not necessarily represent those of the company.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> or for the consequences of any actions taken on the basis of the
> information provided, unless that information is subsequently confirmed
> in writing.
> Any views or opinions presented in this email are solely those of the
> author and do not necessarily represent those of the company.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> <mailto:ptgui+un...@googlegroups.com>.
Conrad Allan
May 19, 2024, 9:52:09 PM5/19/24
to pt...@googlegroups.com
Hi Joost,
Thanks for testing, the fact that you're not experiencing the issue was an indicator to me that it might be something in my specific process.
I discovered the cause is when using a template created initially using PTGui v12. Even if you save it as a new template in PTGui v13, the relative pathing seems not to work.
Steps to replicate should be:
- Open PTGui 13
- Apply a PTGui 12 template
- Ensure the relative paths are as expected
- Save as template
- Open batch builder and use the new template to stitch
Expected Outcome: Output files should end up in the same location as version 12.
Actual Outcome: project file is created one folder up from the image files. Output panorama file is then interpreted (correctly) relatively from this location.
Work Arounds: I will have to recreate my base template from scratch in PTGui 13 (not a big deal for me).
Hopefully you're able to replicate the issue using this approach.
On Fri, May 17, 2024 at 18:59:44, PTGui Support <sup...@ptgui.com> wrote:
Hi Conrad,
I couldn't find any differences between v12 and v13 regarding this.
It works for me when I put this in a template and use the batch builder. The folder ..\..\..\projects is created and the new project is saved there.
It doesn't work when doing File - Save. The 'Save As' dialog pops up; it will navigate to the configured folder if it exists, but it will not create the folder. This might be good to add, but the current behavior is consistent with PTGui 12.
Is this also what you are seeing?
Kind regards,
Joost Nieuwenhuijse
www.ptgui.comOn 14-05-2024 03:29, Conrad Allan wrote:
Hey,
The below settings work for relative pathing work for Ptgui 12, but not for Ptgui 13 beta 6.
CleanShot 2024-05-14 at 11.2...@2x.png
No matter what I enter for the project file location, it always ends up next to the source image folder. I have validated that there are enough parent folders also.
Any assistance here would be greatly appreciated.
Matte Paint Pty LTD accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing.
Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company.
--
You received this message because you are subscribed to the Google Groups "PTGui Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ptgui+unsubscribe@googlegroups.com
<mailto:ptgui+unsubscribe@googlegroups.com>. To view this discussion on the web visit
--
You received this message because you are subscribed to a topic in the Google Groups "PTGui Support" group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/ptgui/QCKzgSx9HxI/unsubscribe. To unsubscribe from this group and all its topics, send an email to ptgui+unsubscribe@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptgui/e05e5074-041a-4f0e-8d80-edc9a7febc71%40ptgui.com.
Conrad Allan
Sep 16, 2024, 8:30:31 PM9/16/24
to PTGui Support
Hi Joost,
I'm still running into this issue in my pipeline. I have noticed that even though I re-built my templates from scratch in PTGui 13, once I save them, the relative pathing stops working.
Have you had anyone else report similar issues?
To unsubscribe from this group and stop receiving emails from it, send an email to ptgui+un...@googlegroups.com
<mailto:ptgui+un...@googlegroups.com>. To view this discussion on the web visit
--
You received this message because you are subscribed to a topic in the Google Groups "PTGui Support" group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/ptgui/QCKzgSx9HxI/unsubscribe. To unsubscribe from this group and all its topics, send an email to ptgui+un...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptgui/e05e5074-041a-4f0e-8d80-edc9a7febc71%40ptgui.com.
PTGui Support
Sep 17, 2024, 2:58:31 AM9/17/24
to pt...@googlegroups.com
Hi Conrad,
I thought it was fixed, I haven't heard about the problem anymore.
Did you recreate the template in PTGui 13 beta 8?
It would be helpful if you could create a couple of screenshots showing
your workflow, and send me your template project and the resulting batch
builder generated project. This should allow me to reproduce the issue.
> *
> *Steps to replicate should be:*
>
> 1. Open PTGui 13
> 2. Apply a PTGui 12 template
> 3. Ensure the relative paths are as expected
> 4. Save as template
> 5. Open batch builder and use the new template to stitch
>
> /*Expected Outcome: */Output files should end up in the same
> location as version 12.
> /*Actual Outcome:*/**project file is created one folder up from the
> --
> bce7-49b7-9a89-440bbd695662n%40googlegroups.com> <https://
> groups.google.com/d/msgid/ptgui/37043505-
> bce7-49b7-9a89-440bbd695662n%40googlegroups.com?
> utm_medium=email&utm_source=footer <https://
> groups.google.com/d/msgid/ptgui/37043505-
> bce7-49b7-9a89-440bbd695662n%40googlegroups.com?
> ptgui/QCKzgSx9HxI/unsubscribe>. To unsubscribe from this group
> groups.google.com/d/msgid/ptgui/e05e5074-041a-4f0e-8d80-
> edc9a7febc71%40ptgui.com>.
> <https://groups.google.com/d/msgid/ptgui/52a10813-
> fc01-4923-8dd1-97122852c276n%40googlegroups.com?
> utm_medium=email&utm_source=footer>.
I thought it was fixed, I haven't heard about the problem anymore.
Did you recreate the template in PTGui 13 beta 8?
It would be helpful if you could create a couple of screenshots showing
your workflow, and send me your template project and the resulting batch
builder generated project. This should allow me to reproduce the issue.
On 17-09-2024 02:30, Conrad Allan wrote:
> Hi Joost,
>
> I'm still running into this issue in my pipeline. I have noticed that
> even though I re-built my templates from scratch in PTGui 13, once I
> save them, the relative pathing stops working.
>
> Have you had anyone else report similar issues?
>
> On Monday, May 20, 2024 at 11:52:09 AM UTC+10 Conrad Allan wrote:
>
> Hi Joost,
>
> Thanks for testing, the fact that you're not experiencing the issue
> was an indicator to me that it might be something in my specific
> process.
>
> I discovered the cause is when using a template created initially
> using PTGui v12. Even if you save it as a new template in PTGui v13,
> the relative pathing seems not to work.
> *
> Hi Joost,
>
> I'm still running into this issue in my pipeline. I have noticed that
> even though I re-built my templates from scratch in PTGui 13, once I
> save them, the relative pathing stops working.
>
> Have you had anyone else report similar issues?
>
> On Monday, May 20, 2024 at 11:52:09 AM UTC+10 Conrad Allan wrote:
>
> Hi Joost,
>
> Thanks for testing, the fact that you're not experiencing the issue
> was an indicator to me that it might be something in my specific
> process.
>
> I discovered the cause is when using a template created initially
> using PTGui v12. Even if you save it as a new template in PTGui v13,
> the relative pathing seems not to work.
> *
> *Steps to replicate should be:*
>
> 1. Open PTGui 13
> 2. Apply a PTGui 12 template
> 3. Ensure the relative paths are as expected
> 4. Save as template
> 5. Open batch builder and use the new template to stitch
>
> /*Expected Outcome: */Output files should end up in the same
> location as version 12.
> /*Actual Outcome:*/**project file is created one folder up from the
> image files. Output panorama file is then interpreted (correctly)
> relatively from this location.
>
> *Work Arounds*: I will have to recreate my base template from
> relatively from this location.
>
> scratch in PTGui 13 (not a big deal for me).
>
>
> Hopefully you're able to replicate the issue using this approach.
>
>
>
>
> Regards,
>
>
> Hopefully you're able to replicate the issue using this approach.
>
>
>
>
> --
>
>
> CONRAD ALLAN
> CEO, Head Of Product
> Brisbane | Australia
> Tel: +61 480 193 024 <tel:+61%20480%20193%20024>
>
> CONRAD ALLAN
> CEO, Head Of Product
> Brisbane | Australia
>
>
>
> On Fri, May 17, 2024 at 18:59:44, PTGui Support <sup...@ptgui.com>
> wrote:
>
> Hi Conrad,
>
> I couldn't find any differences between v12 and v13 regarding this.
>
> It works for me when I put this in a template and use the batch
> builder. The folder ..\..\..\projects is created and the new
> project is saved there.
>
> It doesn't work when doing File - Save. The 'Save As' dialog
> pops up; it will navigate to the configured folder if it exists,
> but it will not create the folder. This might be good to add,
> but the current behavior is consistent with PTGui 12.
>
> Is this also what you are seeing?
>
> Kind regards,
>
> Joost Nieuwenhuijse
> www.ptgui.com <http://www.ptgui.com/>
>
>
> On Fri, May 17, 2024 at 18:59:44, PTGui Support <sup...@ptgui.com>
> wrote:
>
> Hi Conrad,
>
> I couldn't find any differences between v12 and v13 regarding this.
>
> It works for me when I put this in a template and use the batch
> builder. The folder ..\..\..\projects is created and the new
> project is saved there.
>
> It doesn't work when doing File - Save. The 'Save As' dialog
> pops up; it will navigate to the configured folder if it exists,
> but it will not create the folder. This might be good to add,
> but the current behavior is consistent with PTGui 12.
>
> Is this also what you are seeing?
>
> Kind regards,
>
> Joost Nieuwenhuijse
> groups.google.com/d/msgid/ptgui/37043505-
> bce7-49b7-9a89-440bbd695662n%40googlegroups.com?
> utm_medium=email&utm_source=footer <https://
> groups.google.com/d/msgid/ptgui/37043505-
> bce7-49b7-9a89-440bbd695662n%40googlegroups.com?
> utm_medium=email&utm_source=footer>>.
>
> --
> You received this message because you are subscribed to a topic
> in the Google Groups "PTGui Support" group. To unsubscribe from
> this topic, visit https://groups.google.com/d/topic/ptgui/
> QCKzgSx9HxI/unsubscribe <https://groups.google.com/d/topic/
>
> --
> You received this message because you are subscribed to a topic
> in the Google Groups "PTGui Support" group. To unsubscribe from
> this topic, visit https://groups.google.com/d/topic/ptgui/
> ptgui/QCKzgSx9HxI/unsubscribe>. To unsubscribe from this group
> and all its topics, send an email to
> ptgui+un...@googlegroups.com. To view this discussion on
> the web visit https://groups.google.com/d/msgid/ptgui/
> e05e5074-041a-4f0e-8d80-edc9a7febc71%40ptgui.com <https://
> ptgui+un...@googlegroups.com. To view this discussion on
> the web visit https://groups.google.com/d/msgid/ptgui/
> groups.google.com/d/msgid/ptgui/e05e5074-041a-4f0e-8d80-
> edc9a7febc71%40ptgui.com>.
>
>
>
> Matte Paint Pty LTD accepts no liability for the content of this
> email, or for the consequences of any actions taken on the basis of
> the information provided, unless that information is subsequently
> confirmed in writing.
> Any views or opinions presented in this email are solely those of
> the author and do not necessarily represent those of the company.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit https://groups.google.com/d/
> msgid/ptgui/52a10813-fc01-4923-8dd1-97122852c276n%40googlegroups.com
>
>
> Matte Paint Pty LTD accepts no liability for the content of this
> email, or for the consequences of any actions taken on the basis of
> the information provided, unless that information is subsequently
> confirmed in writing.
> Any views or opinions presented in this email are solely those of
> the author and do not necessarily represent those of the company.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit https://groups.google.com/d/
> <https://groups.google.com/d/msgid/ptgui/52a10813-
> fc01-4923-8dd1-97122852c276n%40googlegroups.com?
> utm_medium=email&utm_source=footer>.
Conrad Allan
Sep 19, 2024, 8:52:43 PM9/19/24
to PTGui Support
Sorry for the delay!
I spent several hours trying to trouble shoot and fix the issue the other day and now that I try testing again and took screenshots, I'm unable to reproduce the error.
I've got a few batches of HDRIs to process however, so I will keep a close eye on this and see if I can find the reason and report back.
PTGui Support
Sep 20, 2024, 2:53:39 AM9/20/24
to pt...@googlegroups.com
Actually this was an issue in the earlier betas, it's supposed to be
fixed in the current version. You might have been looking at project
files or templates generated in the earlier version, which have the
wrong output path recorded in the project file.
Thanks for trying to reproduce this!
> > www.ptgui.com <http://www.ptgui.com> <http://www.ptgui.com/
> <https://groups.google.com/d/msgid/ptgui/37043505->
> > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com> <https://
> > groups.google.com/d/msgid/ptgui/37043505-
> <http://groups.google.com/d/msgid/ptgui/37043505->
> > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com>> <https://
> > groups.google.com/d/msgid/ptgui/37043505-
> <http://groups.google.com/d/msgid/ptgui/37043505->
> > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com>?
> > utm_medium=email&utm_source=footer <https://
> > groups.google.com/d/msgid/ptgui/37043505-
> <http://groups.google.com/d/msgid/ptgui/37043505->
> > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com>?
> > e05e5074-041a-4f0e-8d80-edc9a7febc71%40ptgui.com
> <http://40ptgui.com> <https://
> > groups.google.com/d/msgid/ptgui/e05e5074-041a-4f0e-8d80-
> <http://groups.google.com/d/msgid/ptgui/e05e5074-041a-4f0e-8d80->
> > edc9a7febc71%40ptgui.com <http://40ptgui.com>>.
> >
> msgid/ptgui/52a10813-fc01-4923-8dd1-97122852c276n%40googlegroups.com
> <http://40googlegroups.com>
> > <https://groups.google.com/d/msgid/ptgui/52a10813-
> <https://groups.google.com/d/msgid/ptgui/52a10813->
> > fc01-4923-8dd1-97122852c276n%40googlegroups.com
> <http://40googlegroups.com>?
> > utm_medium=email&utm_source=footer>.
>
> --
fixed in the current version. You might have been looking at project
files or templates generated in the earlier version, which have the
wrong output path recorded in the project file.
Thanks for trying to reproduce this!
On 20-09-2024 02:52, Conrad Allan wrote:
> Sorry for the delay!
>
> I spent several hours trying to trouble shoot and fix the issue the
> other day and now that I try testing again and took screenshots, I'm
> unable to reproduce the error.
>
> I've got a few batches of HDRIs to process however, so I will keep a
> close eye on this and see if I can find the reason and report back.
>
> On Tuesday, September 17, 2024 at 4:58:31 PM UTC+10 PTGui Support wrote:
>
> Hi Conrad,
>
> I thought it was fixed, I haven't heard about the problem anymore.
>
> Did you recreate the template in PTGui 13 beta 8?
>
> It would be helpful if you could create a couple of screenshots showing
> your workflow, and send me your template project and the resulting
> batch
> builder generated project. This should allow me to reproduce the issue.
>
> Kind regards,
>
> Joost Nieuwenhuijse
> www.ptgui.com <http://www.ptgui.com>
> Sorry for the delay!
>
> I spent several hours trying to trouble shoot and fix the issue the
> other day and now that I try testing again and took screenshots, I'm
> unable to reproduce the error.
>
> I've got a few batches of HDRIs to process however, so I will keep a
> close eye on this and see if I can find the reason and report back.
>
> On Tuesday, September 17, 2024 at 4:58:31 PM UTC+10 PTGui Support wrote:
>
> Hi Conrad,
>
> I thought it was fixed, I haven't heard about the problem anymore.
>
> Did you recreate the template in PTGui 13 beta 8?
>
> It would be helpful if you could create a couple of screenshots showing
> your workflow, and send me your template project and the resulting
> batch
> builder generated project. This should allow me to reproduce the issue.
>
> Kind regards,
>
> Joost Nieuwenhuijse
> > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com> <https://
> > groups.google.com/d/msgid/ptgui/37043505-
> <http://groups.google.com/d/msgid/ptgui/37043505->
> > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com>> <https://
> > groups.google.com/d/msgid/ptgui/37043505-
> <http://groups.google.com/d/msgid/ptgui/37043505->
> > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com>?
> > utm_medium=email&utm_source=footer <https://
> > groups.google.com/d/msgid/ptgui/37043505-
> <http://groups.google.com/d/msgid/ptgui/37043505->
> > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com>?
> > utm_medium=email&utm_source=footer>>.
> >
> > --
> > You received this message because you are subscribed to a topic
> > in the Google Groups "PTGui Support" group. To unsubscribe from
> > this topic, visit https://groups.google.com/d/topic/ptgui/
> <https://groups.google.com/d/topic/ptgui/>
> > QCKzgSx9HxI/unsubscribe <https://groups.google.com/d/topic/
> <https://groups.google.com/d/topic/>
> > ptgui/QCKzgSx9HxI/unsubscribe>. To unsubscribe from this group
> > and all its topics, send an email to
> > ptgui+un...@googlegroups.com. To view this discussion on
> > the web visit https://groups.google.com/d/msgid/ptgui/
> <https://groups.google.com/d/msgid/ptgui/>
> >
> > --
> > You received this message because you are subscribed to a topic
> > in the Google Groups "PTGui Support" group. To unsubscribe from
> > this topic, visit https://groups.google.com/d/topic/ptgui/
> <https://groups.google.com/d/topic/ptgui/>
> > QCKzgSx9HxI/unsubscribe <https://groups.google.com/d/topic/
> <https://groups.google.com/d/topic/>
> > ptgui/QCKzgSx9HxI/unsubscribe>. To unsubscribe from this group
> > and all its topics, send an email to
> > ptgui+un...@googlegroups.com. To view this discussion on
> > the web visit https://groups.google.com/d/msgid/ptgui/
> > e05e5074-041a-4f0e-8d80-edc9a7febc71%40ptgui.com
> <http://40ptgui.com> <https://
> > groups.google.com/d/msgid/ptgui/e05e5074-041a-4f0e-8d80-
> <http://groups.google.com/d/msgid/ptgui/e05e5074-041a-4f0e-8d80->
> > edc9a7febc71%40ptgui.com <http://40ptgui.com>>.
> >
> >
> >
> > Matte Paint Pty LTD accepts no liability for the content of this
> > email, or for the consequences of any actions taken on the basis of
> > the information provided, unless that information is subsequently
> > confirmed in writing.
> > Any views or opinions presented in this email are solely those of
> > the author and do not necessarily represent those of the company.
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to ptgui+un...@googlegroups.com
> > <mailto:ptgui+un...@googlegroups.com>.
> > To view this discussion on the web visit
> https://groups.google.com/d/ <https://groups.google.com/d/>
> >
> >
> > Matte Paint Pty LTD accepts no liability for the content of this
> > email, or for the consequences of any actions taken on the basis of
> > the information provided, unless that information is subsequently
> > confirmed in writing.
> > Any views or opinions presented in this email are solely those of
> > the author and do not necessarily represent those of the company.
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to ptgui+un...@googlegroups.com
> > <mailto:ptgui+un...@googlegroups.com>.
> > To view this discussion on the web visit
> >
> msgid/ptgui/52a10813-fc01-4923-8dd1-97122852c276n%40googlegroups.com
> <http://40googlegroups.com>
> > <https://groups.google.com/d/msgid/ptgui/52a10813-
> <https://groups.google.com/d/msgid/ptgui/52a10813->
> > fc01-4923-8dd1-97122852c276n%40googlegroups.com
> <http://40googlegroups.com>?
> > utm_medium=email&utm_source=footer>.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/59457623-5cb7-4c86-abbd-226f1e12f83dn%40googlegroups.com <https://groups.google.com/d/msgid/ptgui/59457623-5cb7-4c86-abbd-226f1e12f83dn%40googlegroups.com?utm_medium=email&utm_source=footer>.
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
Conrad Allan
Oct 1, 2024, 11:23:05 PM10/1/24
to PTGui Support
Hey Joost,
I think i've found the issue.
When I have the PTGui project set to <prefix first image folder name> and do a render, the project file is saved in the wrong place. The output file is saved relative to the project so I don't believe there's an issue there.
If i change the project setting to <prefix first image file name> the project file is saved in the correct place.
Interestingly, this behaviour occurs even when the project file is open (not using the batch editor).
Steps to reproduce:
- Open new project
- Add some images
- Apply template (attached)
- Render file and note the location it is exported to
- Change project setting as per above
- render again and note the new location.
As I understand it, the project filename should change but the path should be the same; interpreted from the source image folder)
Thanks for your help!
PTGui Support
Oct 2, 2024, 4:51:34 AM10/2/24
to pt...@googlegroups.com
Hi Conrad,
Yes indeed, I can confirm the issue. It will be fixed in the next beta.
Thanks for chasing this!
> name> / and do a render, the project file is saved in the wrong place.
> 2. Add some images
> 3. Apply template (attached)
> 4. Render file and note the location it is exported to
> 5. Change project setting as per above
> 6. render again and note the new location.
> > <https://groups.google.com/d/msgid/ptgui/37043505- <https://
> groups.google.com/d/msgid/ptgui/37043505->>
> > > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>> <https://
> > > groups.google.com/d/msgid/ptgui/37043505- <http://
> groups.google.com/d/msgid/ptgui/37043505->
> > <http://groups.google.com/d/msgid/ptgui/37043505- <http://
> groups.google.com/d/msgid/ptgui/37043505->>
> > > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>>> <https://
> > > groups.google.com/d/msgid/ptgui/37043505- <http://
> groups.google.com/d/msgid/ptgui/37043505->
> > <http://groups.google.com/d/msgid/ptgui/37043505- <http://
> groups.google.com/d/msgid/ptgui/37043505->>
> > > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>>?
> groups.google.com/d/msgid/ptgui/37043505->>
> > > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>>?
> groups.google.com/d/msgid/ptgui/>>
> > > e05e5074-041a-4f0e-8d80-edc9a7febc71%40ptgui.com
> <http://40ptgui.com>
> > <http://40ptgui.com <http://40ptgui.com>> <https://
> > > groups.google.com/d/msgid/ptgui/e05e5074-041a-4f0e-8d80-
> <http://groups.google.com/d/msgid/ptgui/e05e5074-041a-4f0e-8d80->
> > <http://groups.google.com/d/msgid/ptgui/e05e5074-041a-4f0e-8d80-
> > >
> > msgid/ptgui/52a10813-
> fc01-4923-8dd1-97122852c276n%40googlegroups.com
> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>>
> groups.google.com/d/msgid/ptgui/52a10813->>
> > > fc01-4923-8dd1-97122852c276n%40googlegroups.com
> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>>?
> msgid/ptgui/59457623-5cb7-4c86-
> abbd-226f1e12f83dn%40googlegroups.com?
> utm_medium=email&utm_source=footer <https://groups.google.com/d/
> msgid/ptgui/59457623-5cb7-4c86-
> abbd-226f1e12f83dn%40googlegroups.com?
> <https://groups.google.com/d/msgid/ptgui/
> eb37fcfd-1661-4c09-9743-3998708d2e75n%40googlegroups.com?
> utm_medium=email&utm_source=footer>.
Yes indeed, I can confirm the issue. It will be fixed in the next beta.
Thanks for chasing this!
On 02-10-2024 05:23, Conrad Allan wrote:
> Hey Joost,
>
> I think i've found the issue.
>
> When I have the PTGui project set to /<prefix first image folder
> Hey Joost,
>
> I think i've found the issue.
>
> name> / and do a render, the project file is saved in the wrong place.
> The output file is saved relative to the project so I don't believe
> there's an issue there.
> If i change the project setting to /<prefix first image file name>/ the
> there's an issue there.
> project file is saved in the correct place.
> Interestingly, this behaviour occurs even when the project file is open
> (not using the batch editor).
>
> Steps to reproduce:
>
> 1. Open new project
> Interestingly, this behaviour occurs even when the project file is open
> (not using the batch editor).
>
> Steps to reproduce:
>
> 2. Add some images
> 3. Apply template (attached)
> 4. Render file and note the location it is exported to
> 5. Change project setting as per above
> 6. render again and note the new location.
>
>
> As I understand it, the project filename should change but the path
> should be the same; interpreted from the source image folder)
>
> Thanks for your help!
>
> On Friday, September 20, 2024 at 4:53:39 PM UTC+10 PTGui Support wrote:
>
> Actually this was an issue in the earlier betas, it's supposed to be
> fixed in the current version. You might have been looking at project
> files or templates generated in the earlier version, which have the
> wrong output path recorded in the project file.
>
> Thanks for trying to reproduce this!
>
> Kind regards,
>
> Joost Nieuwenhuijse
> www.ptgui.com <http://www.ptgui.com>
>
> As I understand it, the project filename should change but the path
> should be the same; interpreted from the source image folder)
>
> Thanks for your help!
>
> On Friday, September 20, 2024 at 4:53:39 PM UTC+10 PTGui Support wrote:
>
> Actually this was an issue in the earlier betas, it's supposed to be
> fixed in the current version. You might have been looking at project
> files or templates generated in the earlier version, which have the
> wrong output path recorded in the project file.
>
> Thanks for trying to reproduce this!
>
> Kind regards,
>
> Joost Nieuwenhuijse
>
> On 20-09-2024 02:52, Conrad Allan wrote:
> > Sorry for the delay!
> >
> > I spent several hours trying to trouble shoot and fix the issue the
> > other day and now that I try testing again and took screenshots, I'm
> > unable to reproduce the error.
> >
> > I've got a few batches of HDRIs to process however, so I will keep a
> > close eye on this and see if I can find the reason and report back.
> >
> > On Tuesday, September 17, 2024 at 4:58:31 PM UTC+10 PTGui Support
> wrote:
> >
> > Hi Conrad,
> >
> > I thought it was fixed, I haven't heard about the problem anymore.
> >
> > Did you recreate the template in PTGui 13 beta 8?
> >
> > It would be helpful if you could create a couple of screenshots
> showing
> > your workflow, and send me your template project and the resulting
> > batch
> > builder generated project. This should allow me to reproduce the
> issue.
> >
> > Kind regards,
> >
> > Joost Nieuwenhuijse
> > www.ptgui.com <http://www.ptgui.com> <http://www.ptgui.com
> On 20-09-2024 02:52, Conrad Allan wrote:
> > Sorry for the delay!
> >
> > I spent several hours trying to trouble shoot and fix the issue the
> > other day and now that I try testing again and took screenshots, I'm
> > unable to reproduce the error.
> >
> > I've got a few batches of HDRIs to process however, so I will keep a
> > close eye on this and see if I can find the reason and report back.
> >
> > On Tuesday, September 17, 2024 at 4:58:31 PM UTC+10 PTGui Support
> wrote:
> >
> > Hi Conrad,
> >
> > I thought it was fixed, I haven't heard about the problem anymore.
> >
> > Did you recreate the template in PTGui 13 beta 8?
> >
> > It would be helpful if you could create a couple of screenshots
> showing
> > your workflow, and send me your template project and the resulting
> > batch
> > builder generated project. This should allow me to reproduce the
> issue.
> >
> > Kind regards,
> >
> > Joost Nieuwenhuijse
> groups.google.com/d/msgid/ptgui/37043505->>
> > > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>> <https://
> > > groups.google.com/d/msgid/ptgui/37043505- <http://
> groups.google.com/d/msgid/ptgui/37043505->
> > <http://groups.google.com/d/msgid/ptgui/37043505- <http://
> groups.google.com/d/msgid/ptgui/37043505->>
> > > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>>> <https://
> > > groups.google.com/d/msgid/ptgui/37043505- <http://
> groups.google.com/d/msgid/ptgui/37043505->
> > <http://groups.google.com/d/msgid/ptgui/37043505- <http://
> groups.google.com/d/msgid/ptgui/37043505->>
> > > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>>?
> > > utm_medium=email&utm_source=footer <https://
> > > groups.google.com/d/msgid/ptgui/37043505- <http://
> groups.google.com/d/msgid/ptgui/37043505->
> > <http://groups.google.com/d/msgid/ptgui/37043505- <http://
> > > groups.google.com/d/msgid/ptgui/37043505- <http://
> groups.google.com/d/msgid/ptgui/37043505->
> groups.google.com/d/msgid/ptgui/37043505->>
> > > bce7-49b7-9a89-440bbd695662n%40googlegroups.com
> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>>?
> > > utm_medium=email&utm_source=footer>>.
> > >
> > > --
> > > You received this message because you are subscribed to a topic
> > > in the Google Groups "PTGui Support" group. To unsubscribe from
> > > this topic, visit https://groups.google.com/d/topic/ptgui/
> <https://groups.google.com/d/topic/ptgui/>
> > <https://groups.google.com/d/topic/ptgui/ <https://
> > >
> > > --
> > > You received this message because you are subscribed to a topic
> > > in the Google Groups "PTGui Support" group. To unsubscribe from
> > > this topic, visit https://groups.google.com/d/topic/ptgui/
> <https://groups.google.com/d/topic/ptgui/>
> groups.google.com/d/topic/ptgui/>>
> > > QCKzgSx9HxI/unsubscribe <https://groups.google.com/d/topic/
> <https://groups.google.com/d/topic/>
> > <https://groups.google.com/d/topic/ <https://groups.google.com/d/
> > > QCKzgSx9HxI/unsubscribe <https://groups.google.com/d/topic/
> <https://groups.google.com/d/topic/>
> topic/>>
> > > ptgui/QCKzgSx9HxI/unsubscribe>. To unsubscribe from this group
> > > and all its topics, send an email to
> > > ptgui+un...@googlegroups.com. To view this discussion on
> > > the web visit https://groups.google.com/d/msgid/ptgui/
> <https://groups.google.com/d/msgid/ptgui/>
> > <https://groups.google.com/d/msgid/ptgui/ <https://
> > > ptgui/QCKzgSx9HxI/unsubscribe>. To unsubscribe from this group
> > > and all its topics, send an email to
> > > ptgui+un...@googlegroups.com. To view this discussion on
> > > the web visit https://groups.google.com/d/msgid/ptgui/
> <https://groups.google.com/d/msgid/ptgui/>
> groups.google.com/d/msgid/ptgui/>>
> > > e05e5074-041a-4f0e-8d80-edc9a7febc71%40ptgui.com
> <http://40ptgui.com>
> > <http://40ptgui.com <http://40ptgui.com>> <https://
> > > groups.google.com/d/msgid/ptgui/e05e5074-041a-4f0e-8d80-
> <http://groups.google.com/d/msgid/ptgui/e05e5074-041a-4f0e-8d80->
> > <http://groups.google.com/d/msgid/ptgui/e05e5074-041a-4f0e-8d80-
> <http://groups.google.com/d/msgid/ptgui/e05e5074-041a-4f0e-8d80->>
> > > edc9a7febc71%40ptgui.com <http://40ptgui.com>
> <http://40ptgui.com <http://40ptgui.com>>>.
> > > edc9a7febc71%40ptgui.com <http://40ptgui.com>
> > >
> > >
> > >
> > > Matte Paint Pty LTD accepts no liability for the content of this
> > > email, or for the consequences of any actions taken on the
> basis of
> > > the information provided, unless that information is subsequently
> > > confirmed in writing.
> > > Any views or opinions presented in this email are solely those of
> > > the author and do not necessarily represent those of the company.
> > >
> > > --
> > > You received this message because you are subscribed to the Google
> > > Groups "PTGui Support" group.
> > > To unsubscribe from this group and stop receiving emails from it,
> > send
> > > an email to ptgui+un...@googlegroups.com
> > > <mailto:ptgui+un...@googlegroups.com>.
> > > To view this discussion on the web visit
> > https://groups.google.com/d/ <https://groups.google.com/d/>
> <https://groups.google.com/d/ <https://groups.google.com/d/>>
> > >
> > >
> > > Matte Paint Pty LTD accepts no liability for the content of this
> > > email, or for the consequences of any actions taken on the
> basis of
> > > the information provided, unless that information is subsequently
> > > confirmed in writing.
> > > Any views or opinions presented in this email are solely those of
> > > the author and do not necessarily represent those of the company.
> > >
> > > --
> > > You received this message because you are subscribed to the Google
> > > Groups "PTGui Support" group.
> > > To unsubscribe from this group and stop receiving emails from it,
> > send
> > > an email to ptgui+un...@googlegroups.com
> > > <mailto:ptgui+un...@googlegroups.com>.
> > > To view this discussion on the web visit
> > https://groups.google.com/d/ <https://groups.google.com/d/>
> > >
> > msgid/ptgui/52a10813-
> fc01-4923-8dd1-97122852c276n%40googlegroups.com
> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>>
> > > <https://groups.google.com/d/msgid/ptgui/52a10813- <https://
> groups.google.com/d/msgid/ptgui/52a10813->
> > <https://groups.google.com/d/msgid/ptgui/52a10813- <https://
> groups.google.com/d/msgid/ptgui/52a10813->
> groups.google.com/d/msgid/ptgui/52a10813->>
> > > fc01-4923-8dd1-97122852c276n%40googlegroups.com
> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>>?
> > > utm_medium=email&utm_source=footer>.
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to ptgui+un...@googlegroups.com
> > <mailto:ptgui+un...@googlegroups.com>.
> > To view this discussion on the web visit
> > https://groups.google.com/d/msgid/ptgui/59457623-5cb7-4c86-
> abbd-226f1e12f83dn%40googlegroups.com <https://groups.google.com/d/
> msgid/ptgui/59457623-5cb7-4c86-
> abbd-226f1e12f83dn%40googlegroups.com> <https://groups.google.com/d/
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to ptgui+un...@googlegroups.com
> > <mailto:ptgui+un...@googlegroups.com>.
> > To view this discussion on the web visit
> > https://groups.google.com/d/msgid/ptgui/59457623-5cb7-4c86-
> abbd-226f1e12f83dn%40googlegroups.com <https://groups.google.com/d/
> msgid/ptgui/59457623-5cb7-4c86-
> msgid/ptgui/59457623-5cb7-4c86-
> abbd-226f1e12f83dn%40googlegroups.com?
> utm_medium=email&utm_source=footer <https://groups.google.com/d/
> msgid/ptgui/59457623-5cb7-4c86-
> abbd-226f1e12f83dn%40googlegroups.com?
> utm_medium=email&utm_source=footer>>.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit https://groups.google.com/d/
> msgid/ptgui/eb37fcfd-1661-4c09-9743-3998708d2e75n%40googlegroups.com
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit https://groups.google.com/d/
> <https://groups.google.com/d/msgid/ptgui/
> eb37fcfd-1661-4c09-9743-3998708d2e75n%40googlegroups.com?
> utm_medium=email&utm_source=footer>.
Conrad Allan
Oct 2, 2024, 10:01:01 PM10/2/24
to PTGui Support
Excellent! glad you were able to replicate the issue.
Reply all
Reply to author
Forward
0 new messages