Using Multiple shots from QooCam 3 Ultra

[Kirk M]

I have the template that Joost created for the QooCam 3 Ultra, but it only supports a single image imported.  When the image is loaded and the template applied, the image is duplicated and the first image has the right circular image masked, and the duplicated image has the left circular image masked.  This works great.

But I've been shooting 2 shots at a location, with me standing in different spots so I can overlay and mask myself out.  When I load both images into PTGui, then apply the template, it doesn't duplicate both images, but does mask out one circular image from each of the 2 images.

How can I adjust the template (not sure how to edit that) so that it duplicates image 1, with left and right mask, and then duplicates image 2 with left and right mask?

[PTGui Support]

Hi Kirk,

The easiest way is to use PTGui 12.27 for now, this natively supports
the Qoocam Ultra. The next beta of PTGui 13 will also support it.

In PTGui 12, you can just load the 2 images and it will create 2 copies
of each with proper masks.

If you wish to use PTGui 13, then just save the project in PTGui 12 at
this point, and load it in PTGui 13.

You can install both versions side by side.

See 1.8:
https://ptgui.com/support.html#1_8

and 3.29:
https://ptgui.com/support.html#3_29

Kind regards,

Joost Nieuwenhuijse
www.ptgui.com

> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit https://groups.google.com/d/
> msgid/ptgui/db09c0a1-1865-446e-8c55-b352be64af33n%40googlegroups.com
> <https://groups.google.com/d/msgid/ptgui/db09c0a1-1865-446e-8c55-
> b352be64af33n%40googlegroups.com?utm_medium=email&utm_source=footer>.