PTGui Pro 13.3 – Batch Stitcher Failing / Producing Severely Warped Panoramas (Win11 + RTX 4080)

96 views

Skip to first unread message

Markos Georgiou

unread,

Nov 13, 2025, 3:40:45 AM (13 days ago) Nov 13

to PTGui Support

Hi all,

I’m encountering two critical issues with PTGui Pro 13.3 on Windows 11 Pro that I haven’t been able to resolve after extensive troubleshooting. Hoping someone can shed some light on what might be happening.

Link to Google drive Containing Project files/Raws/Template/and Batch list

Issue 1 – Batch Stitcher Failing to Process Projects

The Batch Stitcher intermittently fails to stitch certain projects without providing a clear error message.
I’ve uploaded sample input files and project files here:
👉 Google Drive link

There doesn’t appear to be a consistent pattern — same template and similar input sets sometimes succeed and sometimes fail.

Issue 2 – Successful Batch Jobs Producing Distorted Output

For projects that do complete “successfully,” roughly 50% of the resulting TIFFs are unusable due to warping or exposure artifacts.

Representative examples:

IMG_20251111_110053_00_113.tif – Exposure seam artifact
IMG_20251111_110116_00_114.tif – Warped / skewed output
IMG_20251111_144414_00_274.tif – Warped / skewed
IMG_20251111_144454_00_275.tif – Severe distortion
IMG_20251111_150936_00_287.tif – Extreme warping
IMG_20251111_170323_00_325.tif – Severely distorted projection

Troubleshooting Steps Attempted

Performed a clean reinstall of PTGui Pro 13.3.
Deleted all templates and recreated them manually.
Tested using another operator’s template (same behavior).
Rolled back NVIDIA drivers to multiple previous versions.
Verified all input images are level
Avoided proximity to near-field objects and seam-critical content.
Confirmed system is idle during stitching to rule out resource contention.

Despite these steps, the problem persists across multiple projects and image sets.

System Configuration

CPU: Intel Core i9-13900KF
RAM: 32 GB DDR4 @ 4400 MT/s
Storage: 2× 2TB NVMe SSDs
GPU: NVIDIA RTX 4080 (multiple driver versions tested)
OS: Windows 11 Pro (fully updated)

Additional Notes

The issue seems to have come out of nowhere.
All affected projects use the same camera and lens parameters that previously stitched without issue.
GPU acceleration is enabled.
CPU/GPU temps remain nominal during stitching.

If anyone has experienced similar instability in batch processing or can suggest specific diagnostic flags/logging options, I’d appreciate any guidance.
It would be particularly useful to know whether PTGui caches optimizer results per batch task or if corruption in a shared temporary file could cause inter-job warping.

Thanks in advance for any insight.

— Markos

PTGui Support

unread,

Nov 14, 2025, 4:34:12 AM (12 days ago) Nov 14

to pt...@googlegroups.com

Hi Markos,

I tried stitching the two projects in the 'Batch Stitcher Fail' folder.
I had to adjust the project for the source image location, but otherwise
the batch stitcher stitched them without problem.

At the bottom of the batch stitcher is a 'log' section. You may not have
noticed if it was small, it can be enlarged. If there's a red
exclamation mark, I would expect something has been logged there. Could
you take a look?

In the batch stitcher you can right click on the failed project and
choose Mark as Not Done. The batch stitcher will then retry. Does it
fail consistently, or is the problem really random?

Since it works for me, it's likely a hardware problem. You could try
disabling GPU acceleration and see if that makes a difference.

But it could also be caused by the i9-13900KF CPU, these cpus are known
to cause memory corruption under certain loads. There's lots of
information to be found by searching Reddit for this cpu.

Kind regards,

Joost Nieuwenhuijse
www.ptgui.com

On 11/13/25 09:40, Markos Georgiou wrote:
> Hi all,
>

> I’m encountering two critical issues with *PTGui Pro 13.3* on *Windows
> 11 Pro* that I haven’t been able to resolve after extensive

> troubleshooting. Hoping someone can shed some light on what might be
> happening.
>
> Link to Google drive Containing Project files/Raws/Template/and Batch

> list <https://drive.google.com/drive/
> folders/1RiDddVYsWTshHJ6iYvLA_WLqdSEQPUji?usp=sharing>
>
> *Issue 1 – Batch Stitcher Failing to Process Projects*

>
> The Batch Stitcher intermittently fails to stitch certain projects
> without providing a clear error message.
> I’ve uploaded sample input files and project files here:

> 👉 Google Drive link <https://drive.google.com/drive/
> folders/1m9vNQxA7xEwpbWckT7jfQkEXrH-C7lOg?usp=sharing>

>
> There doesn’t appear to be a consistent pattern — same template and
> similar input sets sometimes succeed and sometimes fail.
>

> *Issue 2 – Successful Batch Jobs Producing Distorted Output*
>
> For projects that /do/ complete “successfully,” roughly 50% of the

> resulting TIFFs are unusable due to warping or exposure artifacts.
>
> Representative examples:
>

> *
>
> IMG_20251111_110053_00_113.tif – Exposure seam artifact
>
> *

>
> IMG_20251111_110116_00_114.tif – Warped / skewed output
>

> *
>
> IMG_20251111_144414_00_274.tif – Warped / skewed
>
> *
>
> IMG_20251111_144454_00_275.tif – Severe distortion
>
> *
>
> IMG_20251111_150936_00_287.tif – Extreme warping
>
> *
>
> IMG_20251111_170323_00_325.tif – Severely distorted projection
>
> *Troubleshooting Steps Attempted*
>
> 1.

>
> Performed a clean reinstall of PTGui Pro 13.3.
>

> 2.

>
> Deleted all templates and recreated them manually.
>

> 3.

>
> Tested using another operator’s template (same behavior).
>

> 4.

>
> Rolled back NVIDIA drivers to multiple previous versions.
>

> 5.

>
> Verified all input images are level
>

> 6.

>
> Avoided proximity to near-field objects and seam-critical content.
>

> 7.

>
> Confirmed system is idle during stitching to rule out resource
> contention.
>
> Despite these steps, the problem persists across multiple projects and
> image sets.
>

> *System Configuration*
>
> *
>
> *CPU:* Intel Core i9-13900KF
>
> *
>
> *RAM:* 32 GB DDR4 @ 4400 MT/s
>
> *
>
> *Storage:* 2× 2TB NVMe SSDs
>
> *
>
> *GPU:* NVIDIA RTX 4080 (multiple driver versions tested)
>
> * *OS:* Windows 11 Pro (fully updated)
>
> *Additional Notes*
>
> *

>
> The issue seems to have come out of nowhere.
>

> *

>
> All affected projects use the same camera and lens parameters that
> previously stitched without issue.
>

> *
>
> GPU acceleration is enabled.
>
> *

>
> CPU/GPU temps remain nominal during stitching.
>
> If anyone has experienced similar instability in batch processing or can
> suggest specific diagnostic flags/logging options, I’d appreciate any
> guidance.
> It would be particularly useful to know whether PTGui caches optimizer
> results per batch task or if corruption in a shared temporary file could
> cause inter-job warping.
>
> Thanks in advance for any insight.
>

> — /Markos/
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion visit https://groups.google.com/d/msgid/
> ptgui/1979cf24-3e69-4c3d-a34a-02537a78af06n%40googlegroups.com <https://
> groups.google.com/d/msgid/ptgui/1979cf24-3e69-4c3d-
> a34a-02537a78af06n%40googlegroups.com?utm_medium=email&utm_source=footer>.

Markos Georgiou

unread,

Nov 19, 2025, 4:41:27 AM (7 days ago) Nov 19

to PTGui Support

Hello ive looked at the log and it says it cannot find controll points
also ive tried stiching all the images again on a diffrent computer this time my personal with a 3090 192gb of ram and a core ultra 7 and im still having issue with pano comming out looking like abstract art this is becoming extremely bothersome

PTGui Support

unread,

Nov 19, 2025, 4:54:54 AM (7 days ago) Nov 19

to pt...@googlegroups.com

Hi Markos,

That's a different project, right? I'd be happy to investigate if you
could make your files available.

I would need to reproduce exactly what you are doing. If you use the
Batch Builder, please provide your template and the source images.

Regarding the original problem (cannot find controll points): It's
always possible that PTGui cannot find control points for certain
images. You can configure what the batch stitcher will do in such a
case: either abort the stitch with a red question mark, or still attempt
to stitch. This is configured under Project Settings - Batch Stitcher
Actions in your template.

If you have a good template, an you are shooting at the exact angles
defined in the template, you should be able to get a reasonable result
(with minor stitching errors) even if PTGui fails to find control points
for an image.

If you get totally warped results like you showed, something seems to be
wrong with your template.

You can get a good template as follows:

- Stitch one of your projects manually in PTGui. Adjust until the
results look good.
- Go to Project Settings
- Under 'Batch Stitcher Actions' check these boxes:
[X] Do Align Images
[X] Create the panorama
and uncheck [ ] but only if enough control points found
- File -> Save As Template

That's your template, it should work for other sets of images taken the
same way.

Again if you can't get it to work, please make the files available, such
that I'm able to reproduce exactly what you are doing.

Kind regards,

Joost Nieuwenhuijse
www.ptgui.com

On 11/19/25 10:41, Markos Georgiou wrote:
> Hello ive looked at the log and it says it cannot find controll points
> also ive tried stiching all the images again on a diffrent computer this
> time my personal with a 3090 192gb of ram and a core ultra 7 and im
> still having issue with pano comming out looking like abstract art this
> is becoming extremely bothersome

> Screenshot 2025-11-19 114100.png
> On Friday, November 14, 2025 at 11:34:12 AM UTC+2 PTGui Support wrote:
>
> Hi Markos,
>
> I tried stitching the two projects in the 'Batch Stitcher Fail' folder.
> I had to adjust the project for the source image location, but
> otherwise
> the batch stitcher stitched them without problem.
>
> At the bottom of the batch stitcher is a 'log' section. You may not
> have
> noticed if it was small, it can be enlarged. If there's a red
> exclamation mark, I would expect something has been logged there. Could
> you take a look?
>
> In the batch stitcher you can right click on the failed project and
> choose Mark as Not Done. The batch stitcher will then retry. Does it
> fail consistently, or is the problem really random?
>
> Since it works for me, it's likely a hardware problem. You could try
> disabling GPU acceleration and see if that makes a difference.
>
> But it could also be caused by the i9-13900KF CPU, these cpus are known
> to cause memory corruption under certain loads. There's lots of
> information to be found by searching Reddit for this cpu.
>
> Kind regards,
>
> Joost Nieuwenhuijse

> www.ptgui.com <http://www.ptgui.com>

>
> On 11/13/25 09:40, Markos Georgiou wrote:
> > Hi all,
> >
> > I’m encountering two critical issues with *PTGui Pro 13.3* on
> *Windows
> > 11 Pro* that I haven’t been able to resolve after extensive
> > troubleshooting. Hoping someone can shed some light on what might be
> > happening.
> >
> > Link to Google drive Containing Project files/Raws/Template/and
> Batch

> > list <https://drive.google.com/drive/ <https://drive.google.com/
> drive/>

> > folders/1RiDddVYsWTshHJ6iYvLA_WLqdSEQPUji?usp=sharing>
> >
> > *Issue 1 – Batch Stitcher Failing to Process Projects*
> >
> > The Batch Stitcher intermittently fails to stitch certain projects
> > without providing a clear error message.
> > I’ve uploaded sample input files and project files here:

> > 👉 Google Drive link <https://drive.google.com/drive/ <https://
> drive.google.com/drive/>

> <https://groups.google.com/d/msgid/>
> > ptgui/1979cf24-3e69-4c3d-a34a-02537a78af06n%40googlegroups.com
> <http://40googlegroups.com> <https://
> > groups.google.com/d/msgid/ptgui/1979cf24-3e69-4c3d- <http://
> groups.google.com/d/msgid/ptgui/1979cf24-3e69-4c3d->
> > a34a-02537a78af06n%40googlegroups.com?
> utm_medium=email&utm_source=footer <http://40googlegroups.com?
> utm_medium=email&utm_source=footer>>.

>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion visit https://groups.google.com/d/msgid/ptgui/

> e8d40623-235e-429c-9773-f4fcdef48364n%40googlegroups.com <https://
> groups.google.com/d/msgid/ptgui/e8d40623-235e-429c-9773-
> f4fcdef48364n%40googlegroups.com?utm_medium=email&utm_source=footer>.

Markos Georgiou

unread,

Nov 19, 2025, 7:29:59 AM (7 days ago) Nov 19

to PTGui Support

Hello same project as last my issue is mainly with the batch sticher if i apply the template manualy and align it work 90% of the time

Markos Georgiou

unread,

Nov 19, 2025, 7:31:51 AM (7 days ago) Nov 19

to PTGui Support

Would it be possible for you to modify my already atached template ?

Markos Georgiou

unread,

Nov 19, 2025, 7:40:38 AM (7 days ago) Nov 19

to PTGui Support

Is there a chance we could video call or something else cause the back and fourh is tiresome and is not fixing anything this my fourth post

PTGui Support

unread,

Nov 19, 2025, 7:46:18 AM (7 days ago) Nov 19

to pt...@googlegroups.com

Hi Markus,

I'm sorry, I offer support here in the forum only. Please try this:

- Stitch one of your projects manually in PTGui. Adjust until the
results look good.
- Go to Project Settings
- Under 'Batch Stitcher Actions' check these boxes:
[X] Do Align Images
[X] Create the panorama
and uncheck [ ] but only if enough control points found
- File -> Save As Template

That's your template, it should work for other sets of images taken the

same way. You can use this in the batch builder.

If it doesn't work, please make your template available plus a set of
images for which it is failing, and I'll take a look.

Kind regards,

Joost Nieuwenhuijse
www.ptgui.com

> www.ptgui.com <http://www.ptgui.com>

> > www.ptgui.com <http://www.ptgui.com> <http://www.ptgui.com

> <http://www.ptgui.com>>
> >
> > On 11/13/25 09:40, Markos Georgiou wrote:
> > > Hi all,
> > >
> > > I’m encountering two critical issues with *PTGui Pro 13.3* on
> > *Windows
> > > 11 Pro* that I haven’t been able to resolve after extensive
> > > troubleshooting. Hoping someone can shed some light on what
> might be
> > > happening.
> > >
> > > Link to Google drive Containing Project files/Raws/
> Template/and
> > Batch
> > > list <https://drive.google.com/drive/ <https://

> drive.google.com/drive/> <https://drive.google.com/ <https://
> drive.google.com/>

> > drive/>
> > > folders/1RiDddVYsWTshHJ6iYvLA_WLqdSEQPUji?usp=sharing>
> > >
> > > *Issue 1 – Batch Stitcher Failing to Process Projects*
> > >
> > > The Batch Stitcher intermittently fails to stitch certain
> projects
> > > without providing a clear error message.
> > > I’ve uploaded sample input files and project files here:
> > > 👉 Google Drive link <https://drive.google.com/drive/

> <https://drive.google.com/drive/> <https://
> > drive.google.com/drive/ <http://drive.google.com/drive/>>

> > <https://groups.google.com/d/msgid/ <https://
> groups.google.com/d/msgid/>>
> > > ptgui/1979cf24-3e69-4c3d-
> a34a-02537a78af06n%40googlegroups.com <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>>

> <https://
> > > groups.google.com/d/msgid/ptgui/1979cf24-3e69-4c3d-
> <http://groups.google.com/d/msgid/ptgui/1979cf24-3e69-4c3d->

> <http://

> > groups.google.com/d/msgid/ptgui/1979cf24-3e69-4c3d- <http://
> groups.google.com/d/msgid/ptgui/1979cf24-3e69-4c3d->>
> > > a34a-02537a78af06n%40googlegroups.com

> <http://40googlegroups.com>?
> > utm_medium=email&utm_source=footer <http://40googlegroups.com
> <http://40googlegroups.com>?

> > utm_medium=email&utm_source=footer>>.
> >
> > --
> > You received this message because you are subscribed to the
> Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from
> it, send
> > an email to ptgui+un...@googlegroups.com
> > <mailto:ptgui+un...@googlegroups.com>.
> > To view this discussion visit https://groups.google.com/d/

> msgid/ptgui/ <https://groups.google.com/d/msgid/ptgui/>
> > e8d40623-235e-429c-9773-f4fcdef48364n%40googlegroups.com
> <http://40googlegroups.com> <https://
> > groups.google.com/d/msgid/ptgui/e8d40623-235e-429c-9773-
> <http://groups.google.com/d/msgid/ptgui/e8d40623-235e-429c-9773->
> > f4fcdef48364n%40googlegroups.com?

> utm_medium=email&utm_source=footer <http://40googlegroups.com?
> utm_medium=email&utm_source=footer>>.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion visit https://groups.google.com/d/msgid/

> ptgui/706c4fe6-cfff-4983-94ec-661da8e05991n%40googlegroups.com <https://
> groups.google.com/d/msgid/ptgui/706c4fe6-
> cfff-4983-94ec-661da8e05991n%40googlegroups.com?
> utm_medium=email&utm_source=footer>.

Markos Georgiou

unread,

Nov 19, 2025, 7:56:15 AM (7 days ago) Nov 19

to PTGui Support

Hello my original template is built this way ! everything is already available

PTGui Support

unread,

Nov 19, 2025, 10:07:44 AM (7 days ago) Nov 19

to pt...@googlegroups.com

Hi Markos,

Apologies, I didn't look at your files carefully. And I tried my own
advise and also got bad results! That workflow should work for regular
panoramas of multiple overlapping images, but it does not work for
back-to-back fisheye images.

The problem with the latter is that there just a tiny area where the two
images overlap (the outer ring of the fisheye circle). Generating
control points here is hit or miss. If PTGui finds control points on
both sides, the result will turn out fine. But if there are only a few
control points on one side of the fisheye circle, and none on the other,
the other part will go badly out of alignment.

If you want to do batch stitching of these, without manual intervention,
the only way is by not letting PTGui generate control points. Provide a
template with the alignment that PTGui will use for stitching.

I have attached my template.

In the template, I unchecked 'Do Align Images' and I also unchecked this
box:
"When this project is used in the batch builder, initialize the lens
settings for each project using EXIF..".

Give it a try and see how it works.

Kind regards,

Joost Nieuwenhuijse
www.ptgui.com

On 11/19/25 13:56, Markos Georgiou wrote:
> Hello my original template is built this way ! everything is already
> available
>
>
> On Wednesday, November 19, 2025 at 2:46:18 PM UTC+2 PTGui Support wrote:
>
> Hi Markus,
>
> I'm sorry, I offer support here in the forum only. Please try this:
>
> - Stitch one of your projects manually in PTGui. Adjust until the
> results look good.
> - Go to Project Settings
> - Under 'Batch Stitcher Actions' check these boxes:
> [X] Do Align Images
> [X] Create the panorama
> and uncheck [ ] but only if enough control points found
> - File -> Save As Template
>
> That's your template, it should work for other sets of images taken the
> same way. You can use this in the batch builder.
>
> If it doesn't work, please make your template available plus a set of
> images for which it is failing, and I'll take a look.
>
> Kind regards,
>
> Joost Nieuwenhuijse

> www.ptgui.com <http://www.ptgui.com>

> <http://www.ptgui.com>> <http://www.ptgui.com <http://www.ptgui.com>

> > <http://www.ptgui.com <http://www.ptgui.com>>>
> > >
> > > On 11/13/25 09:40, Markos Georgiou wrote:
> > > > Hi all,
> > > >
> > > > I’m encountering two critical issues with *PTGui Pro 13.3* on
> > > *Windows
> > > > 11 Pro* that I haven’t been able to resolve after extensive
> > > > troubleshooting. Hoping someone can shed some light on what
> > might be
> > > > happening.
> > > >
> > > > Link to Google drive Containing Project files/Raws/
> > Template/and
> > > Batch
> > > > list <https://drive.google.com/drive/ <https://
> drive.google.com/drive/> <https://

> > drive.google.com/drive/ <http://drive.google.com/drive/>>
> <https://drive.google.com/ <https://drive.google.com/> <https://
> > drive.google.com/ <http://drive.google.com/>>

> > > drive/>
> > > > folders/1RiDddVYsWTshHJ6iYvLA_WLqdSEQPUji?usp=sharing>
> > > >
> > > > *Issue 1 – Batch Stitcher Failing to Process Projects*
> > > >
> > > > The Batch Stitcher intermittently fails to stitch certain
> > projects
> > > > without providing a clear error message.
> > > > I’ve uploaded sample input files and project files here:
> > > > 👉 Google Drive link <https://drive.google.com/drive/
> <https://drive.google.com/drive/>
> > <https://drive.google.com/drive/ <https://drive.google.com/drive/
> >> <https://
> > > drive.google.com/drive/ <http://drive.google.com/drive/>

> <http://drive.google.com/drive/ <http://drive.google.com/drive/>>>

> > msgid/ <https://groups.google.com/d/msgid/ <https://

> groups.google.com/d/msgid/>>
> > > <https://groups.google.com/d/msgid/ <https://groups.google.com/
> d/msgid/> <https://

> > groups.google.com/d/msgid/ <http://groups.google.com/d/msgid/>>>
> > > > ptgui/1979cf24-3e69-4c3d-
> > a34a-02537a78af06n%40googlegroups.com <http://40googlegroups.com>
> <http://40googlegroups.com <http://40googlegroups.com>>
> > > <http://40googlegroups.com <http://40googlegroups.com>

> <http://40googlegroups.com <http://40googlegroups.com>>>
> > <https://

> > > > groups.google.com/d/msgid/ptgui/1979cf24-3e69-4c3d- <http://

> groups.google.com/d/msgid/ptgui/1979cf24-3e69-4c3d->
> > <http://groups.google.com/d/msgid/ptgui/1979cf24-3e69-4c3d-
> <http://groups.google.com/d/msgid/ptgui/1979cf24-3e69-4c3d->>
> > <http://
> > > groups.google.com/d/msgid/ptgui/1979cf24-3e69-4c3d- <http://
> groups.google.com/d/msgid/ptgui/1979cf24-3e69-4c3d-> <http://
> > groups.google.com/d/msgid/ptgui/1979cf24-3e69-4c3d- <http://
> groups.google.com/d/msgid/ptgui/1979cf24-3e69-4c3d->>>
> > > > a34a-02537a78af06n%40googlegroups.com
> <http://40googlegroups.com>

> > <http://40googlegroups.com <http://40googlegroups.com>>?

> > > utm_medium=email&utm_source=footer <http://40googlegroups.com
> <http://40googlegroups.com>

> > <http://40googlegroups.com <http://40googlegroups.com>>?
> > > utm_medium=email&utm_source=footer>>.
> > >
> > > --
> > > You received this message because you are subscribed to the
> > Google
> > > Groups "PTGui Support" group.
> > > To unsubscribe from this group and stop receiving emails from
> > it, send
> > > an email to ptgui+un...@googlegroups.com
> > > <mailto:ptgui+un...@googlegroups.com>.
> > > To view this discussion visit https://groups.google.com/d/
> <https://groups.google.com/d/>

> > msgid/ptgui/ <https://groups.google.com/d/msgid/ptgui/ <https://
> groups.google.com/d/msgid/ptgui/>>
> > > e8d40623-235e-429c-9773-f4fcdef48364n%40googlegroups.com

> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>> <https://

> > > groups.google.com/d/msgid/ptgui/e8d40623-235e-429c-9773-
> <http://groups.google.com/d/msgid/ptgui/e8d40623-235e-429c-9773->
> > <http://groups.google.com/d/msgid/ptgui/e8d40623-235e-429c-9773-
> <http://groups.google.com/d/msgid/ptgui/e8d40623-235e-429c-9773->>
> > > f4fcdef48364n%40googlegroups.com <http://40googlegroups.com>?

> > utm_medium=email&utm_source=footer <http://40googlegroups.com
> <http://40googlegroups.com>?
> > utm_medium=email&utm_source=footer>>.
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to ptgui+un...@googlegroups.com
> > <mailto:ptgui+un...@googlegroups.com>.
> > To view this discussion visit https://groups.google.com/d/msgid/

> <https://groups.google.com/d/msgid/>
> > ptgui/706c4fe6-cfff-4983-94ec-661da8e05991n%40googlegroups.com
> <http://40googlegroups.com> <https://
> > groups.google.com/d/msgid/ptgui/706c4fe6- <http://
> groups.google.com/d/msgid/ptgui/706c4fe6->
> > cfff-4983-94ec-661da8e05991n%40googlegroups.com

> <http://40googlegroups.com>?
> > utm_medium=email&utm_source=footer>.
>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion visit https://groups.google.com/d/msgid/ptgui/

> a9208ea7-3d29-49da-984c-7f0e714cf786n%40googlegroups.com <https://
> groups.google.com/d/msgid/ptgui/
> a9208ea7-3d29-49da-984c-7f0e714cf786n%40googlegroups.com?
> utm_medium=email&utm_source=footer>.

x5 markos2.pts

Markos Georgiou

unread,

Nov 21, 2025, 3:24:18 AM (5 days ago) Nov 21

to PTGui Support

Hello ive given it a try and it still results in wierd stiched results

PTGui Support

unread,

Nov 21, 2025, 3:51:32 AM (5 days ago) Nov 21

to pt...@googlegroups.com

Hi Markos,

I tried my template with your 5 DNGs and they looked fine. Maybe not
perfect but there is inherent parallax with any one shot camera.

When you use the template, make sure that this box is checked: 'will not
run Align Images', otherwise it would suffer from the original problem.

If you still get bad results, please let me know which source image and
I'll give it another try.

Kind regards,

Joost Nieuwenhuijse
www.ptgui.com

> www.ptgui.com <http://www.ptgui.com>
>
> On 11/19/25 13:56, Markos Georgiou wrote:
> > Hello my original template is built this way ! everything is already
> > available
> >
> >
> > On Wednesday, November 19, 2025 at 2:46:18 PM UTC+2 PTGui Support
> wrote:
> >
> > Hi Markus,
> >
> > I'm sorry, I offer support here in the forum only. Please try this:
> >
> > - Stitch one of your projects manually in PTGui. Adjust until the
> > results look good.
> > - Go to Project Settings
> > - Under 'Batch Stitcher Actions' check these boxes:
> > [X] Do Align Images
> > [X] Create the panorama
> > and uncheck [ ] but only if enough control points found
> > - File -> Save As Template
> >
> > That's your template, it should work for other sets of images
> taken the
> > same way. You can use this in the batch builder.
> >
> > If it doesn't work, please make your template available plus a
> set of
> > images for which it is failing, and I'll take a look.
> >
> > Kind regards,
> >
> > Joost Nieuwenhuijse

> > <http://www.ptgui.com <http://www.ptgui.com>>> <http://

> www.ptgui.com <http://www.ptgui.com> <http://www.ptgui.com <http://
> www.ptgui.com>>
> > > <http://www.ptgui.com <http://www.ptgui.com> <http://

> www.ptgui.com <http://www.ptgui.com>>>>
> > > >
> > > > On 11/13/25 09:40, Markos Georgiou wrote:
> > > > > Hi all,
> > > > >
> > > > > I’m encountering two critical issues with *PTGui Pro 13.3* on
> > > > *Windows
> > > > > 11 Pro* that I haven’t been able to resolve after extensive
> > > > > troubleshooting. Hoping someone can shed some light on what
> > > might be
> > > > > happening.
> > > > >
> > > > > Link to Google drive Containing Project files/Raws/
> > > Template/and
> > > > Batch
> > > > > list <https://drive.google.com/drive/ <https://
> drive.google.com/drive/> <https://

> > drive.google.com/drive/ <http://drive.google.com/drive/>> <https://

> > > drive.google.com/drive/ <http://drive.google.com/drive/>
> <http://drive.google.com/drive/ <http://drive.google.com/drive/>>>

> > <https://drive.google.com/ <https://drive.google.com/> <https://
> drive.google.com/ <https://drive.google.com/>> <https://

> > > drive.google.com/ <http://drive.google.com/> <http://

> drive.google.com/ <http://drive.google.com/>>>
> > > > drive/>
> > > > > folders/1RiDddVYsWTshHJ6iYvLA_WLqdSEQPUji?usp=sharing>
> > > > >
> > > > > *Issue 1 – Batch Stitcher Failing to Process Projects*
> > > > >
> > > > > The Batch Stitcher intermittently fails to stitch certain
> > > projects
> > > > > without providing a clear error message.
> > > > > I’ve uploaded sample input files and project files here:
> > > > > 👉 Google Drive link <https://drive.google.com/drive/
> <https://drive.google.com/drive/>
> > <https://drive.google.com/drive/ <https://drive.google.com/drive/>>

> > > <https://drive.google.com/drive/ <https://drive.google.com/
> drive/> <https://drive.google.com/drive/ <https://drive.google.com/
> drive/>
> > >> <https://

> > groups.google.com/d/msgid/ <http://groups.google.com/d/msgid/>>>
> > > > <https://groups.google.com/d/msgid/ <https://
> groups.google.com/d/msgid/> <https://groups.google.com/ <https://
> groups.google.com/>

> > d/msgid/> <https://
> > > groups.google.com/d/msgid/ <http://groups.google.com/d/msgid/>

> <http://groups.google.com/d/msgid/ <http://groups.google.com/d/

> > > <http://40googlegroups.com <http://40googlegroups.com>
> <http://40googlegroups.com <http://40googlegroups.com>>>?

> > > > utm_medium=email&utm_source=footer <http://40googlegroups.com

> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>>
> > > <http://40googlegroups.com <http://40googlegroups.com>

> <http://40googlegroups.com <http://40googlegroups.com>>>?
> > > > utm_medium=email&utm_source=footer>>.
> > > >
> > > > --
> > > > You received this message because you are subscribed to the
> > > Google
> > > > Groups "PTGui Support" group.
> > > > To unsubscribe from this group and stop receiving emails from
> > > it, send
> > > > an email to ptgui+un...@googlegroups.com
> > > > <mailto:ptgui+un...@googlegroups.com>.
> > > > To view this discussion visit https://groups.google.com/d/
> <https://groups.google.com/d/>
> > <https://groups.google.com/d/ <https://groups.google.com/d/>>
> > > msgid/ptgui/ <https://groups.google.com/d/msgid/ptgui/

> <https://groups.google.com/d/msgid/ptgui/> <https://
> > groups.google.com/d/msgid/ptgui/ <http://groups.google.com/d/
> msgid/ptgui/>>>
> > > > e8d40623-235e-429c-9773-f4fcdef48364n%40googlegroups.com
> <http://40googlegroups.com>

> > <http://40googlegroups.com <http://40googlegroups.com>>
> > > <http://40googlegroups.com <http://40googlegroups.com>
> <http://40googlegroups.com <http://40googlegroups.com>>> <https://

> > > > groups.google.com/d/msgid/ptgui/e8d40623-235e-429c-9773-
> <http://groups.google.com/d/msgid/ptgui/e8d40623-235e-429c-9773->
> > <http://groups.google.com/d/msgid/ptgui/e8d40623-235e-429c-9773-
> <http://groups.google.com/d/msgid/ptgui/e8d40623-235e-429c-9773->>

> > > <http://groups.google.com/d/msgid/ptgui/
> e8d40623-235e-429c-9773- <http://groups.google.com/d/msgid/ptgui/

> e8d40623-235e-429c-9773->
> > <http://groups.google.com/d/msgid/ptgui/e8d40623-235e-429c-9773-
> <http://groups.google.com/d/msgid/ptgui/e8d40623-235e-429c-9773->>>

> > > > f4fcdef48364n%40googlegroups.com <http://40googlegroups.com>

> <http://40googlegroups.com <http://40googlegroups.com>>?
> > > utm_medium=email&utm_source=footer <http://40googlegroups.com
> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>>?
> > > utm_medium=email&utm_source=footer>>.
> > >
> > > --
> > > You received this message because you are subscribed to the Google
> > > Groups "PTGui Support" group.
> > > To unsubscribe from this group and stop receiving emails from it,
> > send
> > > an email to ptgui+un...@googlegroups.com
> > > <mailto:ptgui+un...@googlegroups.com>.
> > > To view this discussion visit https://groups.google.com/d/

> msgid/ <https://groups.google.com/d/msgid/>
> > <https://groups.google.com/d/msgid/ <https://groups.google.com/d/
> msgid/>>
> > > ptgui/706c4fe6-cfff-4983-94ec-661da8e05991n%40googlegroups.com

> <http://40googlegroups.com>
> > <http://40googlegroups.com <http://40googlegroups.com>> <https://

> > > groups.google.com/d/msgid/ptgui/706c4fe6- <http://

> groups.google.com/d/msgid/ptgui/706c4fe6-> <http://
> > groups.google.com/d/msgid/ptgui/706c4fe6- <http://
> groups.google.com/d/msgid/ptgui/706c4fe6->>
> > > cfff-4983-94ec-661da8e05991n%40googlegroups.com
> <http://40googlegroups.com>

> > <http://40googlegroups.com <http://40googlegroups.com>>?
> > > utm_medium=email&utm_source=footer>.
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "PTGui Support" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to ptgui+un...@googlegroups.com
> > <mailto:ptgui+un...@googlegroups.com>.
> > To view this discussion visit https://groups.google.com/d/msgid/

> ptgui/ <https://groups.google.com/d/msgid/ptgui/>
> > a9208ea7-3d29-49da-984c-7f0e714cf786n%40googlegroups.com
> <http://40googlegroups.com> <https://
> > groups.google.com/d/msgid/ptgui/ <http://groups.google.com/d/
> msgid/ptgui/>
> > a9208ea7-3d29-49da-984c-7f0e714cf786n%40googlegroups.com

> ptgui/182361b0-5aab-4b3f-88c7-2cef9b626431n%40googlegroups.com <https://
> groups.google.com/d/msgid/
> ptgui/182361b0-5aab-4b3f-88c7-2cef9b626431n%40googlegroups.com?
> utm_medium=email&utm_source=footer>.

Reply all

Reply to author

Forward

0 new messages