WinSDR Has Problem When PC Was Shutdown

[g...@theconnection.com]

Hello,

I had to shut down my seismometer PC for a couple hours this morning. Now when new data comes in, it will be displayed for one hour and disappears and then a new line starts. Will I have to wait until the new line starts at the top now?

Gary

 

 

585 Lincoln Ave.
Palo Alto CA 94301

650-326-0655

 

Check Out Latest Seismometer Reading

 

I hear and I forget. I see and I remember. I do and I understand. Chinese proverb

 

Be Like Costco…do something in a different way

 

Don’t trust Atoms…they make up everything

 

Fortune Favors The Brave

A part of good science is to see what everyone else can  see but

    think what no one else has ever said.

The difference between being very smart and very foolish is

    often very small.

So many problems occur when people fail to be obedient when

    they are supposed to be obedient, and fail to be creative when

    they are supposed to be creative.

The secret to doing good research is always to be a little

    underemployed. You waste years by not being able to waste

    hours.

It is sometimes easier to make the world a better place than to

    prove you have made the world a better place.

                               Amos Tversky

 

 

[Jón Frímann Jónsson]

Hi,

This is because of corrupt data file. You need to rename the old file or delete it. You just need to do this for today data file.

Best regards,
Jón Frímann

--
You received this message because you are subscribed to the Google Groups "Public Seismic Network Mailing List" group.
To unsubscribe from this group and stop receiving emails from it, send an email to psnlist+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/psnlist/00a601da8c6f%24406e9b60%24c14bd220%24%40theconnection.com.

[Stephen Hammond]

It's very typical. I just keep restarting it and checking the display to see if it is still running. Jón Frímann is correct. However, I stay away from deleting files because the software will resolve the issues after a few restarts. I've also seen it happen sometimes for three or four days.

Regards, SteveHammond

--

[Larry Cochrane]

Jón is correct, Gary's problem is probably do to a corrupted daily record file. Depending on your display settings you
may need to delete either the current day's file and/or the previous day's file.

Steve Hammond wrote:
>It's very typical. I just keep restarting it and checking the display to see if it is still running. Jón Frímann is
>correct. However, I stay away from deleting files because the software will resolve the issues after a few restarts.
>I've also seen it happen sometimes for three or four days.

You can delete the files but you do need to stop WinSDR first. WinSDR will create new daily record files if needed. This
problem should only happen if WinSDR is shutdown unexpectedly like during a power failure or system crash.

-Larry

On 4/11/2024 7:03 PM, Jón Frímann Jónsson wrote:
> Hi,
>
> This is because of corrupt data file. You need to rename the old file or delete it. You just need to do this for today
> data file.
>
> Best regards,
> Jón Frímann
>
> Þann 12.4.2024 00:20, skrifaði g...@theconnection.com:
>>
>> Hello,
>>
>> I had to shut down my seismometer PC for a couple hours this morning. Now when new data comes in, it will be displayed
>> for one hour and disappears and then a new line starts. Will I have to wait until the new line starts at the top now?
>>
>> Gary
>>

>> *585 Lincoln Ave.
>> Palo Alto CA 94301*
>>
>> *650-326-0655*
>>
>> **
>>
>> Check Out Latest Seismometer Reading <http://theconnection.com/>
>>
>> *I hear and I forget. I see and I remember. I do and I understand*. Chinese proverb
>>
>> __
>>
>> *Be Like Costco…do something in a different way*
>>
>> *Don’t trust Atoms…they make up everything*

>>
>> Fortune Favors The Brave
>>
>> A part of good science is to see what everyone else can  see but
>>
>> think what no one else has ever said.
>>
>> The difference between being very smart and very foolish is
>>
>> often very small.
>>
>> So many problems occur when people fail to be obedient when
>>
>> they are supposed to be obedient, and fail to be creative when
>>
>> they are supposed to be creative.
>>
>> The secret to doing good research is always to be a little
>>
>> underemployed. You waste years by not being able to waste
>>
>> hours.
>>
>> It is sometimes easier to make the world a better place than to
>>
>> prove you have made the world a better place.
>>
>> Amos Tversky
>>
>> --
>> You received this message because you are subscribed to the Google Groups "Public Seismic Network Mailing List" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to psnlist+u...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/psnlist/00a601da8c6f%24406e9b60%24c14bd220%24%40theconnection.com

>> <https://groups.google.com/d/msgid/psnlist/00a601da8c6f%24406e9b60%24c14bd220%24%40theconnection.com?utm_medium=email&utm_source=footer>.

>
> --
> You received this message because you are subscribed to the Google Groups "Public Seismic Network Mailing List" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to psnlist+u...@googlegroups.com

> <mailto:psnlist+u...@googlegroups.com>.

> To view this discussion on the web visit

> https://groups.google.com/d/msgid/psnlist/fef1d453-b495-a0d9-2cb9-6afe5cc8a2f0%40jonfr.com
> <https://groups.google.com/d/msgid/psnlist/fef1d453-b495-a0d9-2cb9-6afe5cc8a2f0%40jonfr.com?utm_medium=email&utm_source=footer>.

[g...@theconnection.com]

Hi Larry,
After the screen was clear, a new line started at the top and all is well now
Thank you,
Gary

> <https://groups.google.com/d/msgid/psnlist/fef1d453-b495-a0d9-2cb9-6afe5cc8a2f0%40jonfr.com?utm_medium=email&utm_source=footer>.

--
You received this message because you are subscribed to the Google Groups "Public Seismic Network Mailing List" group.

To unsubscribe from this group and stop receiving emails from it, send an email to psnlist+u...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/psnlist/cbbef254-e879-4594-8697-26d178980553%40webtronics.com.