--
You received this message because you are subscribed to the Google Groups "PSK Reporter" group.
To unsubscribe from this group and stop receiving emails from it, send an email to psk-reporter...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/psk-reporter/149333f4-124b-4030-a116-a8ae4c658242n%40googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "PSK Reporter" group.
To unsubscribe from this group and stop receiving emails from it, send an email to psk-reporter...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/psk-reporter/0db6a9c0-9612-47f7-821c-bf138bb8692an%40googlegroups.com.
You received this message because you are subscribed to a topic in the Google Groups "PSK Reporter" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/psk-reporter/Z2jBJzzoFgA/unsubscribe.
To unsubscribe from this group and all its topics, send an email to psk-reporter...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/psk-reporter/CAEZgdkZ78h13%3DRpMnZt6jMwJB86RGyg0ACWiFfACurgaDgseZg%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/psk-reporter/CAOERBK%3DCk-OkhYn1Drt8inMi_X_thqOQabgZXifdtzwx67Z1_w%40mail.gmail.com.
About FT8 errors, I have always used only WSJT-X, but recently I started playing with MHSV due to a request from a friend. Running they both side by side, I see about 8 times as many errors with MHSV. For example, just listening to white noise all night, with WSJT I typically see 1 error every other night. On average. But with MHSV I usually see 4 or 5 errors every night. This is listening to six meters, dead band so no real signals were present.
MHSV requires about 20 to 25 Db higher audio input level than WSJT-X, and that may affect the error ratio. Anyway, if there was a way to separate MHSV reports and ignore them, the error rate on your experiment might be significantly reduced.
73, Russ K2TXB
To view this discussion on the web visit https://groups.google.com/d/msgid/psk-reporter/CAOERBK%3DCk-OkhYn1Drt8inMi_X_thqOQabgZXifdtzwx67Z1_w%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/psk-reporter/221001d81528%244d91de30%24e8b59a90%24%40comcast.net.
I used deep decode in WSJT-X. There is no deep decode in MHSV, for FT8, but I have 3 stage decoding turned on. I will have to investigate to find out if that is the same as ‘deep’.
Thanks, Russ K2TXB
To view this discussion on the web visit https://groups.google.com/d/msgid/psk-reporter/CAMd_wWq5BSeP44xXY8N669Cp%3DzS3pDZVkXBc76D2-gjTQyN0zA%40mail.gmail.com.
Investigation shows that 3 stage decoding is probably the same as Deep decoding. I cannot find anywhere that says that, but the descriptions are similar. It would be better if developers used same words to describe the technical aspects of their programs…
Russ
To view this discussion on the web visit https://groups.google.com/d/msgid/psk-reporter/225b01d81530%24425cef70%24c716ce50%24%40comcast.net.
To view this discussion on the web visit https://groups.google.com/d/msgid/psk-reporter/227901d81539%241b1b4200%245151c600%24%40comcast.net.


