General Die Info Question
Grayson Price
Good morning, all.
An “issue” has recently been brought to my attention regarding dies. I have seldom investigated PSI’s die tables, so I really don’t even know if this is a module in PSI we don’t use or a feature that has been disabled.
Basically, in the Die File Maintenance module (Standards/Other/Dies) for a given die (R3084 in this example), I would anticipate the footage of material run on this die per job to add to the existing “Qty Run” field. This field is set to 0 for all dies.
Does anyone know if this is something PSI is doing because of a setting or if we as users are not using the proper fields? Any advice or information would be greatly appreciated.
Thanks,
Grayson Price
IT Analyst – TN
1006 Larson Drive
Oak Ridge, TN 37830
Office: (865) 966-8711 x333
Advanced Labelworx, Inc.
"Innovative Label Solutions"
Randall Blinn
Good morning Grayson;
I do not have access to a PSI db running PSI V2010.1.x (unless we do a ZOOM), but the “QTY RUN” might be updated when you do:
Do you know if anyone does the Job Cost | Update Accumulators???
I do recall that the “Qty Since Sharpening” is reset through the Purchase Order module (when you RECEIVE the PO from the sharpening).
If you are NOT RUNNING the Job Cost | Update Accumulators, I would not recommend that you do it unless you have several hours to let it run – it will find all the records in the Job Cost tables that haven’t been updated and process them – very time consuming.
Maybe someone has a better memory. I do know that this was an update to the Die Table information made in one of the last versions of PSI (i.e. V2010.x.x).
Randall G Blinn
GRAPHIC COMPUTER CONSULTANTS, INC.
--
You received this message because you are subscribed to the Google Groups "PSIUsers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
psiusers+u...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/psiusers/6a04b3466cbd47b2a80f4693e8906982%40advancedlabelworx.com.
Grayson Price
Thanks, Randall. I don’t think anyone’s updated accumulators in some time. I will try that this evening as everyone’s heading out. I will keep you posted.
Grayson Price
IT Analyst – TN
1006 Larson Drive
Oak Ridge, TN 37830
Office: (865) 966-8711 x333
Advanced Labelworx, Inc.
"Innovative Label Solutions"
To view this discussion on the web visit https://groups.google.com/d/msgid/psiusers/PH0PR18MB50710AFFF7FC2FD77A8A91BD8E6B2%40PH0PR18MB5071.namprd18.prod.outlook.com.
Randall Blinn
Thanks Grayson!!
Obviously look at a BEFORE (below) and AFTER record. I only played with this once and had to call PSI Support (which tells you how long ago it was) to figure out how to reset the “Qty Since Sharpened”
To view this discussion on the web visit https://groups.google.com/d/msgid/psiusers/1918ca39513f4c8c9bb32a66b7d516ca%40advancedlabelworx.com.