Does Psiphon 3's Server Support IPv6 now?

[JiaFeiX]

Does Psiphon 3's Server Support IPv6 now?

[Adam Kruger]

There are no Psiphon 3 servers that are currently listening on IPv6 addresses.  Do you have native IPv6?  And do you have no access to IPv4?

On Wed, Feb 15, 2012 at 10:14 PM, JiaFeiX <lix...@gmail.com> wrote:

Does Psiphon 3's Server Support IPv6 now?

--
You received this message because you are subscribed to the Google Groups "psiphon3-developers" group.
To post to this group, send email to psiphon3-...@googlegroups.com.
To unsubscribe from this group, send email to psiphon3-develo...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/psiphon3-developers?hl=en.

[Alex Lee]

I have a Native IPv6 VPS, and I want to use this as an IPV6 Psiphon Server, How can I do it? Is it possible?

Cause IPv6 access of China's Education Network (CERNET, most china's college use as ISP) is free of Charge. So, an IPv6 Psiphon will not only avoid censorship but also cut down user's payment. 

2012/2/16 Adam Kruger <a.kr...@psiphon.ca>

--
李珣  XUN LI

--------------------------------------------
www.Lixun.me
讲座控青年提升项目 发起人
北京林业大学 林学专业
MOB：+86.15120092107

[Adam Kruger]

Hi.  Does CERNET only have access to IPv6?  Or is it free to use IPv6 on CERNET, while you are charged extra to use IPv4?

If you want to set up your own Psiphon 3 network, you could try following the instructions here: https://bitbucket.org/psiphon/psiphon-circumvention-system/src/4ca1828a1193/INSTALL

However, since you have a single VPS (with a single IP address) that will likely remain static, you don't need all of the extra discovery logic that Psiphon 3 includes.  It will be far simpler for you to just set up and use the individual components of Psiphon 3:

- On your server, install sshd (or sshd with the handshake obfuscation patch)

- On your client, simply run plink (or plonk, if you are using handshake obfuscation) and polipo, and configure your system to use the local proxies that plink and polipo start

2012/2/16 Alex Lee <lix...@gmail.com>

[Alex Lee]

Thank you!  I 'll follow the instruction.

CERNET both have IPv4 and IPv6 connection.  IPv6 is free of Charge， IPv4 is charged by traffic of Internet.  For example，in my college,we have diffident ipv4 traffic Plan, which varies from 8GB to 80 GB per month.