Install Windows 11 Arm On Raspberry Pi 4
Вячеслав Бахтыгозин
For our install we chose to use an SSD via a USB3 caddy with USB boot enabled on the Pi. This did not go as expected. The images were successfully written to the drive, and they did indeed boot, but they failed at the device discovery portion of the setup. After discussing the issue with YouTuber leepspvideo, it turned out that our USB 3 caddy was to blame. So we opted to use an Argon M.2 case which has a built in USB 3 to SATA board. This worked the first time, and the added bonus is that our Pi is kept cool.
Before using Windows 11 on the Raspberry Pi 4 with an SSD, we first need to ensure that the firmware and bootloader of our Raspberry Pi 4 is set to the latest version so that we can boot from USB 3. The process to do this is detailed in our How to Boot Raspberry Pi 4 / 400 From a USB SSD or Flash Drive. Please complete those steps before moving on.
There are drawbacks, however. This method takes longer than the manual method (shown below) which involves using a PC to generate the ISO file. Depending on your Internet connection and whether anything fails (which it can, causing you to start again), this method could take an hour or two. The manual (via PC) method below should take less than an hour but has more steps and requires a PC.
The install process will take some time, possibly up to an hour. Take no action but continue to monitor the output for any errors. There is a chance that the install may fail, if so close the terminal and repeat the previous steps,
9. Power off your Raspberry Pi, and remove the Raspberry Pi OS boot drive / micro SD. Ensure your Windows 11 drive is connected via USB3 and then power up your Raspberry Pi
The first boot will take quite some time. Leave the installation to complete and you will soon be presented with the typical Windows 11 setup screens. Follow these screens to complete the installation.
The command prompt will now fill with text. This is the output of a command that will download the Windows 11 for Arm image, patch it and then prepare an ISO image. This process may take some time, depending on your Internet connection and the power of your computer.
9. Insert a micro SD card / SSD via USB into your PC. The drive should appear and be ready for use. Please note that the drive will be formatted, and any existing data on the drive will be lost.
17. Check the installation overview. Is the correct drive selected? Have you chosen the correct model of Raspberry Pi? Click Install. The installation process will take around 10 minutes for an SSD. MicroSD installations are longer.
With the Windows 11 micro SD / SSD inserted and our Raspberry Pi booting we now have to setup the Windows 11 install using the standard post installation setup sequence. Follow the process and your Windows 11 Raspberry Pi is ready for use.
8. Ensure that the CPU Clock is set to Default in the CPU configuration menu, Any overclocking at this time will prevent Windows 11 from booting. Press Esc until you reach the first menu.
In our testing, overall performance is decent, in fact it was much better than our 2020 Windows 10 install. Boot time was good, longer than Raspberry Pi OS, but nothing major. Feeling more like an Intel N4100 Celeron in general use.
Once the desktop was loaded the overall feel of Windows 11 on Raspberry Pi was responsive. Windows 11 responded to our input with minimal lag, and moving windows around the screen held up pretty well. The Edge web browser provided a good browsing experience.
Les Pounder is an associate editor at Tom's Hardware. He is a creative technologist and for seven years has created projects to educate and inspire minds both young and old. He has worked with the Raspberry Pi Foundation to write and deliver their teacher training program \"Picademy\"."}), " -0-10/js/authorBio.js"); } else console.error('%c FTE ','background: #9306F9; color: #ffffff','no lazy slice hydration function available'); Les PounderSocial Links NavigationLes Pounder is an associate editor at Tom's Hardware. He is a creative technologist and for seven years has created projects to educate and inspire minds both young and old. He has worked with the Raspberry Pi Foundation to write and deliver their teacher training program "Picademy".
LinkedIn and 3rd parties use essential and non-essential cookies to provide, secure, analyze and improve our Services, and to show you relevant ads (including professional and job ads) on and off LinkedIn. Learn more in our Cookie Policy.
Windows on Raspberry Pi is a project that provides an easy-to-use way to get Microsoft Windows 10 running on the popular single board computer, Raspberry Pi. This project has been around for several years and has gone through various iterations, but it continues to be actively developed by a dedicated team of developers who are passionate about providing users with the latest and greatest Windows experience on the Raspberry Pi.
The main goal of this project is to give users a full-featured version of Windows 10 that runs well on the Raspberry Pi. This includes providing drivers for peripherals such as cameras, keyboards, and mice, as well as support for industry-standard networking protocols such as Wi-Fi and Bluetooth. By running Windows on the Raspberry Pi, users are also able to take advantage of a wide range of software that has been written specifically for the Windows operating system.
The project provides an easy-to-use installer that walks users through setting up and installing Windows 10 on their Raspberry Pi in just a few simple steps. The installation process is designed to be as streamlined and automated as possible, taking the guesswork out of setting up a Windows environment on the Raspberry Pi.
- Raspberry Pi Board: Well, you can use any Raspberry Pi module 4, or 400. Preferably, Raspberry Pi 3 and 4 with 4 GB RAM.
- Micro SD Card with Card Reader: This is to write Windows 10 images.
- USB Drive: This is to install windows operating systems. It is optional. This is required only if you boot your Pi from USB storage.
- IO Peripheral: Keyboard, Mouse, HDMI Cable, Ethernet Cable, and USB Cable, depending on your requirements.
- PC or Mac with an Internet connection: This is required to download the Windows 10 ISO file with Imager and write the Windows 10 to the SD Card or USB Storage Drive.
- Windows on Raspberry imager: A free utility released by WoR Project for flashing content to SD cards and USB drives on your Raspberry Pi.
- Internet: An Internet connection is a must to have to download the imager and create windows 10 ISO image.
We encourage you to take a look at the Getting Windows Images guide before you proceed. This guide will help you to choose the right version of the operating system. We are not going with the ESD image as it supports the WoR-PE package.
Imp Note: we would suggest disabling the Antivirus program before you run the UUP Dump script. We ended up in failure in our initial attempts. We got success only upon disabling the Antivirus protection.
Note: There is a separate imager is made available for download for PE-based installation. We are not covering PE-based installation in this post. If you want to know more about the PE-based installer, please visit this link.
Immediately upon hitting the Next button, you will be asked to select the Storage drive, which is your SD card or USB drive, and the Device type, which is your Raspberry Pi device module. Select both the storage and devise type, then click Next.
There are a few Install and Boot options available to configure as per your needs. We are not going to tweak anything for now. It is not required either. Click Next with the same default configurations.
On this screen, you will see the overview of the installation. If you feel you want to change the settings, just go back and tweak the change you want to go with. If not, everything looks perfect. Click Install.
The process will start with formatting the drive and creating partitions before installing the Windows operating system. Depending on your system resources and storage device R/W speed, this process may take several minutes. Let the process complete. Click Finish to complete the installation process.
Connect all the peripheral devices like Mouse, Keyboard, power adopter, and monitor to your Raspberry Pi. Insert the Windows image flashed micro SD card or plugin the USB drive fire up the Raspberry Pi.
Since you are booting Windows on the Raspberry Pi for the first time, it asks to set up your Windows as in the case of your Windows PC. Set up the Language, Keyboard layout, time zone, account, password, security questions, network, and everything that it asks to set up.
Once the installation is complete, users can explore the Windows 10 operating system and all its features from their Raspberry Pi. With the help of this project, users can experience the full power of Windows 10 on the popular single-board computer, Raspberry Pi. Windows on Raspberry Pi provides an easy and affordable way to get the most out of your Raspberry Pi with the power of Windows 10. So why wait? Get started today!
We hope this post will help you learn how to install Windows 10 on a Raspberry Pi. Thanks for reading this tutorial post. Visit our social media page on Facebook, LinkedIn, Twitter, Telegram, Tumblr, Medium & Instagram, and subscribe to receive updates like this.
My raspberry is connected to my PC directly with crossover cable. The one thing I really dislike about Windows is their obscure networking. It appears impossible to share my network connection to Raspberry. When I try to do so, all network configurations are reset.
This is why I was wondering, if I could download all the packages using some program on windows and then copy it to raspberry. Currently, I copy files to Raspberry using wget through which I access my local http server.
You can then download the .deb package - you will need to download the arm package linked at the bottom of the page (using the armhf packages should work, armel might). Packages for other architectures won't work.
d3342ee215