Re: Tinmo F688 Flash File Dead Display Fix All Versone Firmware
Jemima Torguson
Tinmo F688 Flash File Dead Display Fix All Versone Firmware
If you have a Tinmo F688 smartphone that has a dead display problem, you may be looking for a solution to fix it. In this article, we will show you how to use a flash file firmware to restore your Tinmo F688 to its original state and fix the dead display issue.
What is a flash file firmware?
A flash file firmware is a software program that contains the operating system and other data of a device. It is stored in the internal memory or flash memory of the device. A flash file firmware can be used to update, repair, or reinstall the software of a device.
Why do you need a flash file firmware for Tinmo F688?
There are many reasons why you may need a flash file firmware for your Tinmo F688 smartphone. Some of the common reasons are:
- Your Tinmo F688 has a dead display problem, which means that the screen does not turn on or show anything.
- Your Tinmo F688 is stuck on the logo screen or boot loop, which means that it does not boot up properly or restarts repeatedly.
- Your Tinmo F688 is infected by a virus or malware, which means that it behaves abnormally or shows unwanted ads.
- Your Tinmo F688 has a software error or bug, which means that it does not function as expected or crashes frequently.
- Your Tinmo F688 has a forgotten password or pattern lock, which means that you cannot access your device or data.
In any of these cases, you can use a flash file firmware to fix your Tinmo F688 and make it work normally again.
How to download and install a flash file firmware for Tinmo F688?
To download and install a flash file firmware for your Tinmo F688, you will need the following tools and files:
- A computer with Windows operating system.
- A USB cable to connect your Tinmo F688 to your computer.
- A flash tool software such as SP Flash Tool or Miracle Box.
- A driver software such as MTK USB Driver or VCOM Driver.
- A flash file firmware for your Tinmo F688. You can download it from the links below according to your device version.
Once you have all the tools and files ready, you can follow these steps to flash your Tinmo F688:
- Install the driver software on your computer. This will help your computer to recognize your Tinmo F688 when you connect it via USB.
- Extract the flash file firmware from the zip file. You will get a folder with several files inside.
- Launch the flash tool software on your computer. Select the scatter file from the extracted folder. The scatter file is a text file that contains the information of the flash file firmware.
- Click on the download or start button on the flash tool software. This will initiate the flashing process.
- Turn off your Tinmo F688 and remove the battery if possible. Then connect it to your computer via USB while holding the volume down or volume up button. This will put your Tinmo F688 in download mode or flashing mode.
- Wait for the flashing process to complete. You will see a green tick or OK sign on the flash tool software when it is done.
- Disconnect your Tinmo F688 from your computer and insert the battery if you removed it. Then turn on your device and wait for it to boot up.
Congratulations! You have successfully flashed your Tinmo F688 with a flash file firmware and fixed the dead display problem. You can now enjoy using your device as usual.