PrivateEyePi

hi ok taken another look at the globals.py and have changed the second sensor to a non exsistant gpio

I truly thank you for all of your community support. I will test that new repository, On Friday,

Can you elaborate? On Fri, Feb 7, 2020 at 3:20 AM Ilham Tantowi <ilha...@mahasiswa.pcr.ac.id>

It's running constantly now, so I guess it's fixed! Oh boy, I have so much to learn! On

You might need to try a lower resistance resistor. If you have a lot of wire running to all your

Firstly check the version of the firmware must be 1.9.8 or higher: http://projects.privateeyepi.com/

There is not. The device cant negotiate a proxy firewall if you have one installed.

Hi Kristian, Look at your shipment I see you ordered the AK09. That kit has three 10k resistors in it

I too noticed that, but it currently is sending reports to PrivateEyePi.com, so...

Yes, we received four sensors last Friday (Temperature + Basestation Kit, Water Level, Motion, Switch

Thank you. I will try that. Den söndag 12 februari 2017 kl. 21:26:47 UTC+1 skrev Leslie Holm: Hello

Hi Edit the dallas.py script #Main Loop while True: if (elapsed_temperature_time > 600):

Here are the changes to rfthermtest.py to run with python3. line 37: print("Please wait max 5

You need 2 transmitters, one for each purpose. You can do both using an rfu-328, but that requires

Unfortunately not at this time, other than cut and past from the browser.

You have all the SPI interface IO's (MOSI, SCLK, CEO) on your adapter. And you can adjust RST and

No they trigger on low. Is that an issue?

I upgraded my Pi using the apt-get upgrade command, rebooted and then I got the same problem.

Hi, I have fixed the broken links in this post, if there are others please let me know - thanks for