PrivateEyePi

Sorry to revive a long ago thread, but do you think the following sensor could be configured to

Thanks Glenn! On Tuesday, September 24, 2024 at 10:46:39 PM UTC-4 glenn....@seltron.com wrote: The

We migrated to a new server for monitor.jemrf.com. There was a network issue that caused sensors to

Thanks Glenn appreciate the info and reply. Mark On Tuesday, September 10, 2024 at 11:21:40 AM UTC-4

I am not sure what you did. Did you connect the RPI Tx and Rx to the sensor Tx and Rx? The sensor tx

Hello! I have just received a Temp/Humidity Sensor and have got everything talking, but in the

script_path = "https://www.privateeyepi.com/alarmhostr.php?token="+token+"

John, In our structure, a gateway is a device that sends data to the server. So a WiFi sensor has two

I was trying to use a 5G wifi network. Evidently the device only supports 2.4G. Thank you for your

I released WiFi Sensor Update 3.4.6 to the Download server. I did see the difference and corrected

My PIR is disconnected, however I'm getting a log entry every 5 minutes from the PIR. Screenshot

If the relay powers up low and the RF chip is wired correctly it will also power up the relay low.

There are a number of uses and projects such as here for motion sensor or here for a water sensor

In case it helps anyone, I've gone through some experiments with door switches. You can buy the

I have spent the last month standing up a network of JemRF sensors around the house and optimizing my

Joel, this error is slightly different than in your 1st message, and is the exact message I got when

Further information. After several failed attempt to redirect the output of serial_mon.py to a file,

Glenn, yes, that Flex module is perfect. I want it to switch a relay to open & close the garage

Please contact sales @ jemrf.com; there is a software update we are validating, and we can provide it

Problem I'm trying to resolve: PIR issues a log entry every three minutes [it used to be 7

The programs were moved to GitHup (https://github.com/JemRF/RF-Apps) to consolidate the different

I have a temperature sensor set up and it is properly reporting readings however no matter what I do

I have expanded the database to handle the larger device numbers. That should fix the problem. You

It wasn't the token, it was my Wi-Fi network configuration. Everything is working properly now.

I am getting email alerts when I have turned all my Alarm Zones off. Is this how the application is

The Sensors and IOT Gateways have new firmware, Version 7.6. The biggest change is the IOT Gateways

Oh wow, awesome! Looks like you made the entire code base more robust. Paul On Tuesday, October 3,

I have had this happen with my 10 sensors using the Raspberry Pi IOT Gateway. Rebooting the RP did

The MQTT Details are at https://documents.jemrf.com/gatewaymqtt.html They are the same as the WiFI

We are pleased to announce firmware release 3.3.6. The WiFi Sensor now supports MQTT and connects