Computer Networks.pdf

[Lashawna Vorhees]

For example, Dominos has a network of 1232 branches across India. As the name suggests the computer network is a system of peripherals or computers interconnected with each other and has a standard communication channel established between them to exchange different types of information and data.

Have you ever heard of the Internet or the NET? I guess you have, as you are already reading this article on Interviewbit surfing the internet. But, have you ever thought about the internet? The Internet is a network of a network connecting all different network-enabled devices which enable data and information sharing between them and that makes computer networks a core part of our life and technical interviews.

IPv4 classes are differentiated based on the number of hosts it supports on the network. There are five types of IPv4 classes and are based on the first octet of IP addresses which are classified as Class A, B, C, D, or E.

LANs are widely used to connect computers/laptops and consumer electronics which enables them to share resources (e.g., printers, fax machines) and exchange information. When LANs are used by companies or organizations, they are called enterprise networks. There are two different types of LAN networks i.e. wireless LAN (no wires involved achieved using Wi-Fi) and wired LAN (achieved using LAN cable). Wireless LANs are very popular these days for places where installing wire is difficult. The below diagrams explain both wireless and wired LAN.

Node: Any communicating device in a network is called a Node. Node is the point of intersection in a network. It can send/receive data and information within a network. Examples of the node can be computers, laptops, printers, servers, modems, etc.

Link: A link or edge refers to the connectivity between two nodes in the network. It includes the type of connectivity (wired or wireless) between the nodes and protocols used for one node to be able to communicate with the other.

Private Address: For each class, there are specific IPs that are reserved specifically for private use only. This IP address cannot be used for devices on the Internet as they are non-routable.

DNS is the Domain Name System. It is considered as the devices/services directory of the Internet. It is a decentralized and hierarchical naming system for devices/services connected to the Internet. It translates the domain names to their corresponding IPs. For e.g. interviewbit.com to 172.217.166.36. It uses port 53 by default.

The router is a networking device used for connecting two or more network segments. It directs the traffic in the network. It transfers information and data like web pages, emails, images, videos, etc. from source to destination in the form of packets. It operates at the network layer. The gateways are also used to route and regulate the network traffic but, they can also send data between two dissimilar networks while a router can only send data to similar networks.

SMTP is the Simple Mail Transfer Protocol. SMTP sets the rule for communication between servers. This set of rules helps the software to transmit emails over the internet. It supports both End-to-End and Store-and-Forward methods. It is in always-listening mode on port 25.

Open System Interconnections (OSI) is a network architecture model based on the ISO standards. It is called the OSI model as it deals with connecting the systems that are open for communication with other systems.

It is a compressed version of the OSI model with only 4 layers. It was developed by the US Department of Defence (DoD) in the 1980s. The name of this model is based on 2 standard protocols used i.e. TCP (Transmission Control Protocol) and IP (Internet Protocol).

HTTPS is the HyperText Transfer Protocol Secure or Secure HTTP. It is an advanced and secured version of HTTP. On top of HTTP, SSL/TLS protocol is used to provide security. It enables secure transactions by encrypting the communication and also helps identify network servers securely. It uses port 443 by default.

FTP is a File Transfer Protocol. It is an application layer protocol used to transfer files and data reliably and efficiently between hosts. It can also be used to download files from remote servers to your computer. It uses port 27 by default.

TCP or TCP/IP is the Transmission Control Protocol/Internet Protocol. It is a set of rules that decides how a computer connects to the Internet and how to transmit the data over the network. It creates a virtual network when more than one computer is connected to the network and uses the three ways handshake model to establish the connection which makes it more reliable.

UDP is the User Datagram Protocol and is based on Datagrams. Mainly, it is used for multicasting and broadcasting. Its functionality is almost the same as TCP/IP Protocol except for the three ways of handshaking and error checking. It uses a simple transmission without any hand-shaking which makes it less reliable.

ICMP is the Internet Control Message Protocol. It is a network layer protocol used for error handling. It is mainly used by network devices like routers for diagnosing the network connection issues and crucial for error reporting and testing if the data is reaching the preferred destination in time. It uses port 7 by default.

It is an application layer protocol used to auto-configure devices on IP networks enabling them to use the TCP and UDP-based protocols. The DHCP servers auto-assign the IPs and other network configurations to the devices individually which enables them to communicate over the IP network. It helps to get the subnet mask, IP address and helps to resolve the DNS. It uses port 67 by default.

ARP is Address Resolution Protocol. It is a network-level protocol used to convert the logical address i.e. IP address to the device's physical address i.e. MAC address. It can also be used to get the MAC address of devices when they are trying to communicate over the local network.

MAC address is the Media Access Control address. It is a 48-bit or 64-bit unique identifier of devices in the network. It is also called the physical address embedded with Network Interface Card (NIC) used at the Data Link Layer. NIC is a hardware component in the networking device using which a device can connect to the network.

A subnet is a network inside a network achieved by the process called subnetting which helps divide a network into subnets. It is used for getting a higher routing efficiency and enhances the security of the network. It reduces the time to extract the host address from the routing table.

The firewall is a network security system that is used to monitor the incoming and outgoing traffic and blocks the same based on the firewall security policies. It acts as a wall between the internet (public network) and the networking devices (a private network). It is either a hardware device, software program, or a combination of both. It adds a layer of security to the network.

A computer network is a set of computers sharing resources located on or provided by network nodes. Computers use common communication protocols over digital interconnections to communicate with each other. These interconnections are made up of telecommunication network technologies based on physically wired, optical, and wireless radio-frequency methods that may be arranged in a variety of network topologies.

The nodes of a computer network can include personal computers, servers, networking hardware, or other specialized or general-purpose hosts. They are identified by network addresses and may have hostnames. Hostnames serve as memorable labels for the nodes and are rarely changed after initial assignment. Network addresses serve for locating and identifying the nodes by communication protocols such as the Internet Protocol.

Computer networks may be classified by many criteria, including the transmission medium used to carry signals, bandwidth, communications protocols to organize network traffic, the network size, the topology, traffic control mechanisms, and organizational intent.[citation needed]

Computer networks support many applications and services, such as access to the World Wide Web, digital video and audio, shared use of application and storage servers, printers and fax machines, and use of email and instant messaging applications.

Computer networking may be considered a branch of computer science, computer engineering, and telecommunications, since it relies on the theoretical and practical application of the related disciplines. Computer networking was influenced by a wide array of technological developments and historical milestones.

Computer networks enhance how we communicate with each other by using various electronic methods like email, instant messaging, online chat, voice and video calls, and video conferencing. Networks also enable the sharing of computing resources. For example, you can print a document on a shared printer or use shared storage devices. Additionally, networks allow for the sharing of files and information, giving authorized users access to data stored on other computers. Distributed computing leverages resources from multiple computers across a network to perform tasks collaboratively.

Packets consist of two types of data: control information and user data (payload). The control information provides data the network needs to deliver the user data, for example, source and destination network addresses, error detection codes, and sequencing information. Typically, control information is found in packet headers and trailers, with payload data in between.

With packets, the bandwidth of the transmission medium can be better shared among users than if the network were circuit switched. When one user is not sending packets, the link can be filled with packets from other users, and so the cost can be shared, with relatively little interference, provided the link is not overused. Often the route a packet needs to take through a network is not immediately available. In that case, the packet is queued and waits until a link is free.

c80f0f1006