Windows Xp Could Not Start Because The Following File Is Missing

0 views

Skip to first unread message

Mckenzie Witting

unread,

Jul 31, 2024, 7:22:39 AM7/31/24

to predexsede

MiniTool OEM program enable partners like hardware / software vendors and relative technical service providers to embed MiniTool software with their own products to add value to their products or services and expand their market.

What causes the error that Windows could not start because the following file is missing or corrupt? How to fix the Windows\System32\Config\System is missing or corrupt? This post from MiniTool will show you the solutions.

windows xp could not start because the following file is missing

Download File ❤ https://fenlaekdiaho.blogspot.com/?mu=2zV2uM

Computer may come across the boot failure due to all kinds of reasons, such as the error code 0xc0000001, the boot selection failed because the required device is inaccessible, Windows could not start because the following file is missing or corrupt, and so on.

So, in the following part, we will show you how to fix the error that Windows failed to load because the system registry file is missing or corrupt. But before proceeding to the solutions, you had better rescue data from the unbootable computer due to the system registry file missing or corrupt.

It is often for you to encounter the error that Windows could not start because the following file is missing or corrupt on Windows 7/8/10 and XP. So, all operations will be made on Windows 7 and the measures can be used on other Windows versions.

MiniTool ShadowMaker is a piece of professional backup software. It is designed to back up the operating system, files, folders, disks and partitions. It also enables you to sync files to other locations with the Sync feature. In addition, MiniTool ShadowMaker is a clone tool, which enables you to clone OS from HDD to SSD without data loss.

Since your computer is unbootable due to the error Windows system32 config system missing or corrupt. You need the help of bootable media to boot computer and retrieve data. MiniTool ShadowMaker enables you to do that.

6. Then you will enter the MiniTool Recovery Environment, go to the Backup page. Click Source module and choose Folders and Files. Then select the files you want to retrieve to continue.

If there are some problems such as bad sectors on hard drive, you may also encounter the error that Windows could not start because the following file is missing or corrupt. So, in order to fix the Windows\system32\config\system file download error, you can check the hard drive.

Then the chkdsk utilities will begin to scan your hard drive. When the scanning process is finished, reboot your computer and check whether the problem that Windows could not start because the following file is missing or corrupt is solved.

The problem that Windows failed to load because the system registry file is missing or corrupt can be fixed by replacing it with a clean copy that was created on the hard drive when Windows was installed.

Then you can follow the wizard to complete Windows installation. When the process is finished, the computer can boot normally and you also have fixed the problem that Windows could not start because the following file is missing or corrupt.

After fixing the problem that Windows failed to load because the system registry file is missing or corrupt, it is recommended to create a system image. In this way, it can effectively safeguard your computer and files. In addition, you can directly restore your computer to a normal state when encountering some problems or coming across the issue that Windows could not start because the following file is missing or corrupt again.

To create a system image, MiniTool ShadowMaker is able to do that. And you can read the post: How to Back up Windows to Safeguard Your Computer? Try MiniTool! to know more detailed operation instructions.

To sum up, this post has introduced what is the error that Windows could not start because the following file is missing or corrupt. This post also has shown 5 ways to fix the error that Windows\system32\config\system is missing or corrupt.

I spent a long time searching for the answer to this without any luck. My solution aims to provide you with a quick and relatively easy way to resolve the problem without the XP CD or Recovery Console.

Use the built-in file browser to navigate to the location of WINDOWS on the hard drive. Follow the screenshot below to help find this. You will essentially be looking for what would have been in the following location in WINDOWS:

Once in the System Volume Information folder you will see another folder called: a_restorehexidecimal-characters. Go in there and you should be presented with a number of different folders with the the following naming convention RP123. It is these folders where Windows should have saved back ups of the system files.

NOTE: I did have different OS at one point and maybe I used the wrong restore points. it was windows Home, then XP then 2003 server. When I used the other ones, it tried to boot to Windows home, then I chose XP. For windows 2003 there was no System or Software files.

Only if you have a copy of the original Windows XP disc with the recovery console or if you happen to have another way of booting into a different OS where you can view and get access ot the files on the hard drive.

Thanks for this, allowed me to fix a laptop with the missing file message. I knew the required files were somewhere! Rather than the Linux method I hooked the hard drive up to another XP PC and copied the required files across.

Thanks a million. This is a great and elegant solution. Wish others would think outside the box sometimes. I have a Dell computer and their help said that since Windows XP was OEM it may not even be possible to use the recovery feature even if I had the disk, WOW!

Hi Larry, thanks for the comment.
Your absolutely right, an alternative to the USB solution is to put the hard disk in another working machine and copy it from there.
Glad you got your issue resolved ?

Tom, I forgot to mention that after running debug utility on my Dell Inspiron 1545, the program indicated: Error Code: 4400:011A Generic-Multi-Card-Target-Not-Ready which in several forums was mentioned to indicate a HDD failure. As per my previous comment and your post shows, this was not at all the case. Thanks again.

We also use third-party cookies that help us analyze how you use this website, store your preferences, and provide the content and advertisements that are relevant to you. These cookies will only be stored in your browser with your prior consent.

Necessary cookies are required to enable the basic features of this site, such as providing secure log-in or adjusting your consent preferences. These cookies do not store any personally identifiable data.

The following information on this error has been compiled by NeoSmart Technologies, based on the information gathered and reported by our global network of engineers, developers, and technicians or partner organizations.

The Windows Registry is a hierarchical database that stores low-level settings for the Microsoft Windows operating system and for applications that opt to use the Registry. When a computer loads, Windows tries to access the registry to get the loading settings, but if the registry is corrupted, then the loading process halts and the following error screen is displayed.

The Windows registry may become corrupted because of many different reasons, including but not limited to virus attacks, power outages, disk write errors, or mistakes made by the user while configuring the registry manually.

The corrupted registry may also be fixed by replacing it with a clean copy that was created on the hard drive when Windows was installed. Note that this operation will restore the system to a state that might be very far from its current state; however, it still should be possible to recover user data in that state. This procedure also should not be used if the computer has an OEM-installed operating system, because the system registry hive on OEM installations creates passwords and user accounts that did not exist previously. This means that if these steps are followed on an OEM machine, then it may not be possible to log back into the recovery console to restore the original registry hives.

First, a backup of all current registry files is made so that they could be restored if anything goes wrong. Then, the existing registry is deleted, and replaced with a clean copy from the C:\Windows\Repair folder.

Right after the boot process is completed successfully, it is possible to either backup all user data and reinstall Windows from scratch, or follow the procedure described in the Windows KB corrupted registry article to manually restore the system registry to a more newer version that was backed up by System Restore.