Indoor OTA experimentation modification

[Md Habibur Rahman]

Hi there,

I currently have an experiment in the Indoor OTA lab but I am not able to start an experiment as I have a d740 and d710 but when I go to make an experiment in the Indoor OTA lab it is saying I need either a d740 or d430 for the compute nodes to be paired with the SDR or CN. Could you guys change the current reservation I have right now such that the d710 is replaced with a compute node that will allow me to make an experiment in the Indoor OTA environment. Also if possible can you extend the experiment as I had to deal with this issue.

Thanks

Habib

[Kirk Webb]

Hello Habib,

An important note on terminology: What you have is a _reservation_ for
resources. An _experiment_ refers to an active set of resources setup
as specified in the _profile_ used to _instantiate_ said experiment.
When you instantiate a profile, POWDER will attempt to make use of the
resources you have reserved.

Please always provide a link (URL) to the relevant resources that you
refer to, for example the reservation, profile, or the (possibly
failed) instantiated experiment. I have updated your reservation to
include six d740 nodes, which is hopefully sufficient for whatever
profile you are using, based on the parameters you set. I have
extended this reservation through 8 AM MDT on 7/7 (Monday).

-Kirk

> --
> You received this message because you are subscribed to the Google Groups "Powder Users" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to powder-users...@googlegroups.com.
> To view this discussion visit https://groups.google.com/d/msgid/powder-users/e7a0efff-7863-4787-804f-fc129a4e84f0n%40googlegroups.com.