Inter-gNB handover on RF-Attenuator Matrix

[Wesley Woo]

Hi all,

I'm looking to test the performance of gNB handover against a modified version of gNB handover. To do this, I wanted to use the RF-attenuator matrix setup. However, I see that the handover example provided for the RF-attenuator matrix setup is for intra-gNB handover (that is, inter-DU but intra-CU) (link).

Does anyone how to set up inter-gNB/inter-CU handover on the RF-attenuator matrix?/Has inter-gNB handover been done on the RF-attenuator matrix setup before? In theory it should be possible -- the USRP X310 is running two separate DUs, so it would just be a matter of getting the USRP X310 to run two separate gNBs instead of DUs.

Thanks,

Wesley

[Dustin Maas]

Hi Wesley,

Inter-gNB handover is not officially supported by either of the open source RAN stacks yet.

-Dustin

--
You received this message because you are subscribed to the Google Groups "Powder Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to powder-users...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/powder-users/5f035c70-0ceb-4c2b-aaf4-0974d811709en%40googlegroups.com.