Could not instantiate srsLTE Controlled/Indoor RF with O-RAN support

[Kazi Samin Mubasshir]

Hi POWDER Community,

I attempted to instantiate the srslte-shvlan-oran profile. Since there were other OTA experiments running, I tried to use one X310-1, nuc3, nuc4, and a d740 to avoid interfering with the ongoing experiments.

However, the experiment initialization failed with an error stating that I do not have a reservation for nuc4, even though I currently have active reservations for these clusters. I also made sure to instantiate the required ORAN profile beforehand, as per the suggested workflow.

Could you confirm whether this profile is compatible with the selected mix of clusters (X310-1, nuc3, nuc4, and d740)? And could you look at why the reservation for nuc4 might not be recognized during initialization?

Best Regards

Kazi

[Kirk Webb]

Hello Kazi,

You will need to point us at a failed instantiation attempt (provide
the URL) in order for us to troubleshoot the issue. Note that only a
single reservation can be active for the indoor OTA lab at a time.
Given the node IDs you have provided, it sounds like you are trying to
use the conducted RF environment, but I would like to see a failed
instantiation to be sure.

BR,
-Kirk

> --
> You received this message because you are subscribed to the Google Groups "Powder Users" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to powder-users...@googlegroups.com.
> To view this discussion visit https://groups.google.com/d/msgid/powder-users/CAARvkVqQ9vLFiYfK4EMKqFsVSrYd1FqD2FNYskJffd7K8xAVrw%40mail.gmail.com.

[Kazi Samin Mubasshir]

Hi Kirk,

This is the link: https://www.powderwireless.net/status.php?uuid=82a868b8-94ba-11f0-bc80-e4434b2381fc

Best Regards

Kazi

To view this discussion visit https://groups.google.com/d/msgid/powder-users/CAFKO4CFiCmEMLv6xFySMGepEHd7xDPZ3pnhNSamjrHsgHUNskA%40mail.gmail.com.

[Kirk Webb]

Hi Kazi,

That experiment no longer exists. Please try instantiating again, and
if it fails, please don't click "terminate." Instead, send a link to
the failed attempt.

-Kirk

On Fri, Sep 19, 2025 at 11:55 AM Kazi Samin Mubasshir

> To view this discussion visit https://groups.google.com/d/msgid/powder-users/CAARvkVqXnG4UuboGioQj1rfB3wrHx0QMYTx_R-%3DxxcHBY5%3DEEw%40mail.gmail.com.