Windows 10 Android Bluetooth Tethering
Christal Rasband
I'm aware of normal tethering scenarios in which the user can share the Mobile Data connection with other phones/pcs via wifi-hotspot, bluetooth tethering or USB tethering and my phone is capable of all of them.
This is a good question which myself couldn't get a satisfactory solution. This solution posted here seemed promising although I found out the bluetooth stack supports fewer bluetooth adapters and also some link was taken down.
In my experience using windows 10 tablet and FieldGenius 10 connected to RS2 . In Reachveiw you select the device in bluetooth settings then windows popup says tab to connect and verify the code , press yes, Then go to FG and select reciever Emlid then type of reciever , (the RS and + unit were called reach but I see RS2 is called rover .) If everything is correct it should connect .
That being said, turning on the ATV and letting it idle does not seem to cause the issue. As well, once the bluetooth has dropped often turning off the ATV or moving the equipment around does not allow it to find the EM38 via bluetooth.
Lastly, I have attached a photo showing our old wired setup, but it should help with visualization. With the bluetooth setup, we have the computer in the bin on the front and the RS2 on a pole on the back of the ATV. Everything else is the same.
Well, with the metal rack under the computer and the metal handlebars and maybe/maybe not the metal spooling rig on the back of the ATV (but certainly the metal frame. Why not just stick a good (or beefed up bluetooth unit out the back of the quad and route a USB extension cable up to the front mounted computer?
I would put someone on the back (sitting backward and holding the computer). If that works without dropouts, then mount the computer back there or leave it up front and run the USB extension to an external bluetooth adapter out back.
This article describes the different settings you can control and restrict on Android Enterprise devices owned by your organization. As part of your mobile device management (MDM) solution, use these settings to allow or disable features, run apps on dedicated devices, control security, and more.
Some settings aren't supported by all enrollment types. To see the supported settings by the different enrollment types, sign into the Intune admin center. Each setting is under a heading that indicates the enrollment types that can use the setting.
For corporate-owned devices with a work profile, some settings only apply in the work profile. These settings have (work profile-level) in the setting name. For fully managed and dedicated devices, these settings apply device-wide.
Screen capture (work profile-level): Block prevents screenshots or screen captures on the device. It also prevents the content from being shown on display devices that don't have a secure video output. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might let users capture the screen contents as an image.
Date and Time changes: Block prevents users from manually setting the date and time. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might allow users to the set date and time on the device.
Roaming data services: Block prevents data roaming over the cellular network. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might allow data roaming when the device is on a cellular network.
Wi-Fi access point configuration: Block prevents users from creating or changing any Wi-Fi configurations. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might allow users to change the Wi-Fi settings on the device.
Bluetooth configuration: Block prevents users from configuring Bluetooth on the device. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might allow using Bluetooth on the device.
Tethering and access to hotspots: Block prevents tethering and access to portable hotspots. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might allow tethering and access to portable hotspots.
External media: Block prevents using or connecting any external media on the device. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might allow external media on the device.
Developer settings: Choose Allow to let users access developer settings on the device. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might prevent users from accessing developer settings on the device.
Microphone adjustment: Block prevents users from unmuting the microphone and adjusting the microphone volume. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might allow users to use and adjust the volume of the microphone on the device.
Factory reset protection emails: Choose Google account email addresses. Enter the email addresses of device administrators that can unlock the device after it's wiped. Be sure to separate the email addresses with a semi-colon, such as adm...@gmail.com;adm...@gmail.com. These emails only apply when a non-user factory reset is run, such as running a factory reset using the recovery menu.
Device Default (default): Use the device's default setting. By default, if the device is connected to Wi-Fi, is charging, and is idle, then the OS updates automatically. For app updates, the OS also validates if the app isn't running in the foreground.
Postponed: Updates are postponed for 30 days. At the end of the 30 days, Android prompts users to install the update. It's possible for device manufacturers or carriers to prevent (exempt) important security updates from being postponed. An exempted update shows a system notification to users on the device.
Maintenance window: Installs updates automatically during a daily maintenance window that you set in Intune. Installation tries daily for 30 days, and can fail if there's insufficient space or battery levels. After 30 days, Android prompts users to install.
Location: Block disables the Location setting on the device and prevents users from turning it on. When this setting is disabled, then any other setting that depends on the device location is affected, including the Locate device remote action that admins use. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might allow using location on the device.
Volume changes: Block prevents users from changing the device's volume, and also mutes the main volume. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might allow using the volume settings on the device.
Factory reset: Block prevents users from using the factory reset option in the device's settings. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might allow users to use this setting on the device.
Status bar: Block prevents access to the status bar, including notifications and quick settings. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might allow users access to the status bar.
Wi-Fi setting changes: Block prevents users from changing Wi-Fi settings created by the device owner. Users can create their own Wi-Fi configurations. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might allow users to change the Wi-Fi settings on the device.
Network escape hatch: Enable allows users to turn on the network escape hatch feature. If a network connection isn't made when the device boots, then the escape hatch asks to temporarily connect to a network and refresh the device policy. After you apply the policy, the temporary network is forgotten and the device continues booting. This feature connects devices to a network if:
When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might prevent users from turning on the network escape hatch feature on the device.
Notification windows: When set to Disable, window notifications, including toasts, incoming calls, outgoing calls, system alerts, and system errors aren't shown on the device. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might show notifications.
Skip first use hints: Enable hides or skips suggestions from apps that step through tutorials, or hints when the app starts. When set to Not configured (default), Intune doesn't change or update this setting. By default, the OS might show these suggestions when the app starts.
Power button menu: Block hides the power options when users hold down the power button when in kiosk mode. Hiding these options prevents users from accidentally or intentionally shutting down devices. When set to Not configured (default), Intune doesn't change or update this setting. By default, when users hold down the power button on a device, they're shown power options, such as Restart and Power off.
d3342ee215