FS: Used Hazer-4 & accesories
525 views
Skip to first unread message
Edward R Cole
Mar 30, 2021, 5:25:27 PM3/30/21
to moon...@mailman.pe1itr.com, ak-...@mailman.qth.net, pnw...@googlegroups.com
I am selling my Hazer-4 antenna lift for use on Rohn-25 tower.
info: Glen Martin Hazer Systems - Antenna Parts Outlet
This now NLA from Glenn Martin so may become somewhat rare to find.
Here is itemized list and costs when I bought it new:
Hazer-4 ... $600.00
Pulley (for tower top) ...$85*
Winch ... $110.00
Bearing ... $105.00
Rollers (6) ... $120 (est)
Total ... $1020
Hazer-4 is rated for 200-lb. dead weight and 16-sq foot wind area at 87 mph.
EME array-1.jpg (600×452) (kl7uw.com)
2m_eme_array_cropped.jpg (720×960) (kl7uw.com)
Hazer-crossboom.jpg (600×452) (kl7uw.com)
I'm selling the package without pulley* for $350 (plus shipping)
* its still at 50-foot on my tower which is leaning ten degrees out of plumb (not climbable). You can get one for about $25 at a hardware store.
Also the rotor plate was modified for a Alpha-Spid RAK rotor so one might want to replace it (cost $40). Also easy enough to make from 1/4-inch aluminum plate.
1/8-inch wire rope NOT included. I ran about 100-foot on my 50-foot tower. Can be gotten from the above link but likely cheaper from local hardware.
My winch cable failed in high winds allowing the Hazer to free-fall to ground level. I had guy wires tied to the Hazer which high wind stressed winch cable beyond breaking. My upper guys tied to the tower were slack which is condition needed for rotating my eme array without interference. With upper guys tensioned tower would not have bent or Hazer cable snapped.
Hazer weighs 49-lbs. without weight of accessories. Probably ship in two boxes; one long box to ship Hazer and other flat-rate box for misc hdwr, winch, rollers, bearing and rotator shelves.
more pictures of the Hazer on ground after removal from tower will be taken.
info: Glen Martin Hazer Systems - Antenna Parts Outlet
This now NLA from Glenn Martin so may become somewhat rare to find.
Here is itemized list and costs when I bought it new:
Hazer-4 ... $600.00
Pulley (for tower top) ...$85*
Winch ... $110.00
Bearing ... $105.00
Rollers (6) ... $120 (est)
Total ... $1020
Hazer-4 is rated for 200-lb. dead weight and 16-sq foot wind area at 87 mph.
EME array-1.jpg (600×452) (kl7uw.com)
2m_eme_array_cropped.jpg (720×960) (kl7uw.com)
Hazer-crossboom.jpg (600×452) (kl7uw.com)
I'm selling the package without pulley* for $350 (plus shipping)
* its still at 50-foot on my tower which is leaning ten degrees out of plumb (not climbable). You can get one for about $25 at a hardware store.
Also the rotor plate was modified for a Alpha-Spid RAK rotor so one might want to replace it (cost $40). Also easy enough to make from 1/4-inch aluminum plate.
1/8-inch wire rope NOT included. I ran about 100-foot on my 50-foot tower. Can be gotten from the above link but likely cheaper from local hardware.
My winch cable failed in high winds allowing the Hazer to free-fall to ground level. I had guy wires tied to the Hazer which high wind stressed winch cable beyond breaking. My upper guys tied to the tower were slack which is condition needed for rotating my eme array without interference. With upper guys tensioned tower would not have bent or Hazer cable snapped.
Hazer weighs 49-lbs. without weight of accessories. Probably ship in two boxes; one long box to ship Hazer and other flat-rate box for misc hdwr, winch, rollers, bearing and rotator shelves.
more pictures of the Hazer on ground after removal from tower will be taken.
73, Ed - KL7UW
http://www.kl7uw.com
Dubus-NA Business mail:
dubu...@gmail.com
Reply all
Reply to author
Forward
0 new messages