PNW Microwave

You can also erect grounded shield barriers between different sections of your circuit. Coax -- RG400

Thank you Ray for all of your trouble. Good information to file away and study. Yes, the particular

Below is the latest price list from Paul Wade. For 902 or 1296 you need: Transverter Board for 902 (

Hi all, I plan on being in CN88VA (Marysville) from ~ 11am - 1 pm tomorrow Will have 2, 432 and 10

I made a blog post about the activity from the American site: https://pnw-microwave.com/BlogPost/ul0g

Nice Site!!! Here is a virtual view from the Cypress Lookout! (end of red line on the horizon is Blyn

I may be on travel next week. I probably can make the 27th --Konrad WA4OSH On Sat, Apr 5, 2025, 9:55

I haven't been able to make it to a build day for a while, so I figured I'd post here. I'

Thanks, all. I will plan to attend but will need to leave by 11. On Fri, Mar 7, 2025 at 12:29 PM Nick

Hi to the group -- I am still looking for a 2 foot dish antenna for my project. What have you got?

Hi to the group -- I have an opportunity to acquire higher power transverters on both of these bands

G'day folks, I am building a 47 GHz beacon which I'm hoping can be installed alongside the 10

Hi to the Group -- Recently, I have needed a low loss cable for use at 3400 and 5760. Searching EBAY

Hi to the group -- I put the final touches on the 5.7 / 3.4 Ghz tranverter today. I have 1.3W at 5.7

Hi to the group -- I am looking for a LNB, it doe not need to work, as a matter of fact it doesn'

With the VHF contest behind us I decided to work on some unfinished projects. One of them was a

Hi Rick, Just in the last few days, a pile of inexpensive isolators were advertised on the Moon-Net

Hi to the group, I am in need of 20 to 25 feet of LDF5-50 coax cable with connectors. If you have

Hi to the group -- I am just about ready to put 5760 on the air and I have at present an 18 inch dish

I got my 1.2GH PA advertised art 50W at 1250Mhz. Don't think so. It is a 4W part for 700-1000.

Hi to the group, I am one relay short for my 3400Mhz project. Do you have a spare? Let me know --

Hi -- I completed the HB 5760 transverter today, TX = 31.5dbm output and RX MDS is >-125db. RF

I agree Konrad, I did not think that they would last too long considering the number of hams on 10

What Rod did not say is what his goal was. The DigiLo does not need a PCB to be useful. The DigiLo

Hi to the group--- I am looking for a chunk of WR90 waveguide, 6 to 10 inches long. Thanks -- Rick

Hi to the group - I will be on 220 at 7PM, 903 at 7:30, and 1296 at 8PM. Hope to see you there --

Hi to the group -- I guess you would call this a pitch to encourage the use of 903Mhz. There are

Hello uW'ers, This is a reminder that the build days in November moved from the normal morning

Hi to the group -- I am working on a project that needs a pair of power poles to connect the 24Vdc to

Hi to the group -- For those of you that go portable or rove, I have a medium size pelican case, 10

Hi to the group -- I am working on a couple of projects that I need parts for. 5.7Gc -- 4 or 6 foot

Hi -- Thought I would share this project with the group. It isn't pretty and most likely won'

Rick, I look forward to seeing it. --Konrad, WA4OSH On Mon, Oct 21, 2024 at 7:48 PM Rick Beatty <