Carbrain C168 Crack Rar Password
Ted Brathwaite
UCANDAS features
*Supporting ISO 9141-2, K/L line, SAE-J1850 VPW, SAE-J1850 PWM, CAN ISO 11898, ISO15765-4 protocols.
*High-speed, medium speed and low speed CAN-BUS, Single CAN-BUS diagnosis protocols is supported.
*Can check out the year and model of the vehicles automatically and quickly.
*All inclusive software coverage - European, American, Asian and Australian prevalent vehicles.
*OBDII diagnostic connector has a wide compatibility, which don't need to replace other connector, during the testing.
*Hardware architecture uses new design with multiple protection, interference and stability. Built-in overvoltage protection module is applied, in order to protect scanner and vehicle against accidental damage during checking.
*Can work stably in high and low temperature environment, and work well.
WIFI usage instruction:
1) Power on the car. Connect the hardware of VDM and your car then wait for about 20 seconds
2) After device initialization is complete, open WIFI to search until you see the WIFI for this VDM UCANDAS
3) Open the VDM software, this software will recognize and match the WIFI automatically.
Attention: Match WIFI first then open the VDM software. DO NOT open software first then match WIFI. If you want to use WIFI function. Do not use the XP2 system laptop. XP2 system laptop cannot use the WIFI function.
For old version VDM, WIFI name is same. If you use many VDM at the same time to diagnose, you will confused to which VDM need to match which WIFI. Now for new version, it new adds the function to change the name of WIFI. In setup option, you can set ucandas as ucandas1, ucandas2, ucandas 3 and so on to distinguish. After you setup the password, you need to fill VDM password 87654321 manually. If you start car first then power on VDM main unit. Wait for about 20 seconds, and you will search for the WIFI you renamed. Then open VDM software, WIFI will matched automatically.