Staple Gun

[danie...@hotmail.com]

Hi

I am looking for a stapel gun to build my ribs for my model 12.
Does any one out there have one they wany to sell or know where i
can get one?
This one i am looking at not sure if its the right one to use

http://www.juldan.com/store.html?specials.html

Thanks Daniel

[Phillip Palmer, PhD]

Dan,
I used a pre- owned Senco. After filling down the hammer a bit, to avoid over penetration, its been a champ. I think I paid $52 off eBay. I used a regulated nitrogen bottle as the supply to build all my wings and ailerons in a 1 bedroom apartment. Compressor may have been too loud.

Phil

"danie...@hotmail.com" <danie...@hotmail.com> wrote:

>--
>PLEASE READ THIS -
>
>TO REPLY TO THIS MESSAGE: Use "reply to sender" function to reply to the above topic only, and please INCLUDE ONLY YOUR REPLY. By deleting all prior existing text (including this footer) it won't be repeated in the archives, making future searching and reading easier.
>
>DO NOT REPLY TO THIS EMAIL TO START A NEW TOPIC ! ! !
>Otherwise Google will just add it to the above subject thread.
>
>TO START A NEW TOPIC:
>You have to make a new "virgin" email addressed to Pit...@googlegroups.com
>Press CTRL-N in most email programs to do this
>
>NOTE: You are subscribed to the Google Groups "Pitts Model 12" group.
>To unsubscribe from this group, send email to:
>Pitts12-u...@googlegroups.com
>
>HELPFUL LINKS: http://groups.google.com/group/Pitts12?hl=en
>Jim Kimball Enterprises www.PittsModel12.com
>www.2wings.com

[Kevin Kimball]

Dan,

 

We use the SFT10XP type gun with A wire staples 3/16" crown.  We use staples 1/4, 3/8, 1/2" long.  Juldan has these guns.

Sincerely,

Kevin Kimball, VP Engineering
Jim Kimball Enterprises, Inc.
PO Box 849, 5354 Cemetery Rd.
Zellwood, FL 32798
407-889-3451 phone
407-889-7168 fax
Ke...@jimkimballenterprises.com
www.jimkimballenterprises.com 
www.pittsmodel12.com